Supermicro MBD-X8DAH+-B Handleiding
Supermicro
Moederbord
MBD-X8DAH+-B
Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro MBD-X8DAH+-B (99 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/99
Preface
About this Manual
This manual is written for system integrators, PC technicians and knowledgeable PC
users. It provides information for the installation and use of the X8DAH+/
X8DAH+-F motherboard.
About this Motherboard
The X8DAH+/X8DAH+-F supports the Intel® 5500/5600 Series Proces-
sor platform, the fi rst dual-processing platform that supports the Intel QuickPath
Interconnect (QPI) Technology, providing the next generation point-to-point system
interface to replace the current Front Side Bus. With the Intel 5520 chipset built in,
the X8DAH+/X8DAH+-F substantially enhances system performance with increased
bandwidth and unprecedented scalability optimized for HPC/Cluster systems and
intensive applications. Please refer to our website (http://www.supermicro.com/
products/) for updates on processor and memory support. This product is intended
to be installed and serviced by professional technicians.
Manual Organization
Chapter 1 describes the features, specifi cations and performance of the mother-
board and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see , which describes trouble-Chapter 3
shooting procedures for video, memory and system setup stored in the CMOS.
Chapter 4 includes an introduction to BIOS and provides detailed information on
running the CMOS Setup utility.
Appendix A . Appendix Blists BIOS POST Error Codes and Appendix C provide
the Windows OS and Other Software Installation Instructions.
iii
Preface
Product specificaties
Merk: | Supermicro |
Categorie: | Moederbord |
Model: | MBD-X8DAH+-B |
Breedte: | 347 mm |
Diepte: | 330 mm |
Aantal USB 2.0-poorten: | 6 |
Aantal Ethernet LAN (RJ-45)-poorten: | 2 |
Certificering: | RoHS |
Meegeleverde software: | Super Doctor III |
Temperatuur bij opslag: | -40 - 70 °C |
PCI Express slots versie: | 2.0 |
Ingebouwde grafische adapter: | Nee |
Luchtvochtigheid bij opslag: | 5 - 95 procent |
ECC: | Ja |
Ethernet interface type: | Gigabit Ethernet |
Chipset moederbord: | Intel® 5520 |
PCI Express x16 slots: | 2 |
PS/2 poort(en): | 2 |
Seriële poort(en): | 1 |
PCI Express x8 slots: | 4 |
PCI Express x4 slots: | 1 |
Geheugen voltage: | 1.35, 1.5 V |
LAN controller: | Intel® 82576 |
Soorten RAID: | 0, 1,5, 10 |
Non-ECC: | Ja |
Maximum UDIMM geheugen: | 48 GB |
Aantal DIMM sloten: | 18 |
Ondersteunende RDIMM klok snelheden: | 800,1066,1333 MHz |
Ondersteunend DIMM module capaciteiten: | 16GB, 1GB, 2GB, 4GB, 8GB |
Bedrijfstemperatuur (T-T): | 10 - 35 °C |
Relatieve vochtigheid in bedrijf (V-V): | 8 - 90 procent |
Moederbord form factor: | Verlengd ATX |
Supported memory clock speeds: | 800,1066,1333 MHz |
BIOS type: | AMI |
Grootte BIOS-geheugen: | 32 Mbit |
ACPI version: | 3.0 |
Aansluitingen voor behuizingsventilatoren: | 6 |
USB 2.0 aansluitingen: | 1 |
Chassis intrusion aansluiting: | Ja |
IEEE1394 aansluitingen: | 2 |
Heb je hulp nodig?
Als je hulp nodig hebt met Supermicro MBD-X8DAH+-B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Supermicro
8 April 2024
8 April 2024
8 April 2024
8 April 2024
20 November 2023
6 September 2023
6 September 2023
6 September 2023
6 September 2023
6 September 2023
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
25 April 2024
31 Maart 2024
31 Maart 2024
30 Maart 2024
30 Maart 2024
30 Maart 2024
25 Maart 2024
20 Maart 2024
20 Maart 2024
19 Maart 2024