Supermicro H8SGL-F Handleiding

Supermicro Moederbord H8SGL-F

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro H8SGL-F (74 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/74

H8SGL

H8SGL-F

USER’S MANUAL

Revision 1.0d

SUPER

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0d

Release Date: November 23, 2010

Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

iii

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of the

H8SGL(-F) serverboard.

The H8SGL(-F) serverboard is based on the AMD® SR5650/SP5100 chipset

and supports one AMD Socket G34 type processor with up to 128 GB of DDR3-

1333/1066/800 registered ECC SDRAM or 32 GB of DDR3-1333/1066/800 MHz

unbuffered ECC/non-ECC SDRAM. The H8SGL serverboard does not have IPMI

capability, whereas the H8SGL-F serverboard does.

Please refer to the motherboard speciﬁ cations pages on our web site for updates on

supported processors (http://www.supermicro.com/aplus/). This product is intended

to be professionally installed.

Manual Organization

Chapter 1 includes a checklist of what should be included in your motherboard

box, describes the features, speciﬁ cations and performance of the motherboard

and provides detailed information about the chipset.

Chapter 2 begins with instructions on handling static-sensitive devices. Read this

chapter when installing the processor(s) and memory modules and when installing

the motherboard in a chassis. Also refer to this chapter to connect the hard disk

drives, the various ports, and the power and reset buttons and the system LEDs.

If you encounter any problems, see Chapter 3, which describes troubleshooting

procedures for the video, the memory and the setup conﬁ guration stored in CMOS.

For quick reference, a general FAQ (Frequently Asked Questions) section is

provided. Instructions are also included for contacting technical support. In addition,

you can visit our web site for more detailed information.

Appendix A provides BIOS Error Beep Code Messages.

Appendix B lists BIOS POST Checkpoint Codes.

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	H8SGL-F
Breedte:	305 mm
Diepte:	203 mm
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Processor socket:	Socket G34
Processorfabrikant:	AMD
Maximum intern geheugen:	256 GB
Ingebouwde grafische adapter:	Ja
On-board graphics adapter model:	Matrox G200
ECC:	Ja
Ethernet interface type:	Gigabit Ethernet
Chipset moederbord:	AMD SR5650
RAID support:	Ja
Geheugen kanaal:	Vierkanaals
Ondersteunde opslagstationinterfaces:	SATA II
PS/2 poort(en):	2
Seriële poort(en):	1
Geheugen voltage:	1.35, 1.5 V
LAN controller:	Intel® 82574L
Soorten RAID:	1, 10
Non-ECC:	Ja
PCI-slots:	3
Aantal ondersteunde processoren:	1
Maximum UDIMM geheugen:	64 GB
Aantal DIMM sloten:	8
Ondersteunende RDIMM klok snelheden:	1066,1333,1600 MHz
Ondersteunend DIMM module capaciteiten:	16GB, 1GB, 2GB, 32GB, 4GB, 8GB
Ondersteunde geheugen types:	DDR3-SDRAM
Moederbord southbridge:	AMD SP5100
Wifi:	Nee
PCI Express x4 (Gen 2.x) slots:	1
PCI Express x8 (Gen 2.x) slots:	2
AMD Opteron series:	6000
Moederbord form factor:	ATX
Supported memory clock speeds:	1066,1333,1600 MHz
BIOS type:	AMI
Grootte BIOS-geheugen:	16 Mbit
ACPI version:	2.0
Ondersteuning voor parallel processing:	Niet ondersteund
USB 2.0 aansluitingen:	6
Aantal SATA II connectors:	6
On-board graphics adapter geheugen:	16 MB
Processor aantal cores ondersteund:	4, 8,12, 16