Supermicro SuperServer 6028TP-HC1TR Handleiding

Supermicro Server SuperServer 6028TP-HC1TR

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro SuperServer 6028TP-HC1TR (1 pagina's) in de categorie Server. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

http://www.supermicro.com MNL-1664-QRG

Board Layout

SuperServer 6028TP-HC1R/HC1TR/HC1FR Quick Reference Guide

Rear View

BIOS Beep Codes

Beep Code/LED Message Description

1 beep Refresh Circuits have been reset.

(Ready to power up)

5 short beeps + 1 long

beep

Memory Error

5 beeps and 2 short

beeps

Display memory

read/write error

CPU Installation

Beep Codes

Front view & Interface



Heatsink Installation

1. Place the heatsink on top of the installed CPU.

2. Align the four screws to the socket.

3. Holding the heatsink in place, screw down as shown

(cross pattern, in order: A, C, B, D).

4. Note: Only use 6-8 lb/f of torque; otherwise, hand-tighten

each screw to avoid damaging the CPU.

Memory

Caution

SAFETY INFORMATION

IMPORTANT: See installation instructions and safety warning

before connecting system to power supply.

http://www.supermicro.com/about/policies/safety_information.cfm

WARNING

To reduce risk of electric shock/damage to equipment,

disconnect power from server by disconnecting all power

cords from electrical outlets.

If any CPU socket empty, install protective plastic CPU cap

CAUTION

Always be sure all power supplies for this system have

the same power output. If mixed power supplies are

installed, the system will not operate.

Align CPU to socket;

install CPU straight down

For more information go to :

http://www.supermicro.com/support



No memory detected

NOTE:

Do not bend pin inside socket



Processors and Memory Module Population for Optimal Performance

Number of

CPUs + DIMMs

CPU and Memory Population Configuration Table

(For memory to work properly, follow the instructions below)

1 CPU & 2 DIMMs CPU1: P1-DIMMA1/P1-DIMMB1

1 CPU & 4 DIMMs

1 CPU & 5~8 DIMMs

2 CPUs & 4 DIMMs

2 CPUs & 6 DIMMs

CPU1: P1-DIMMA1/P1-DIMMB1, P1-DIMMC1/P1-DIMMD1

CPU1: P1-DIMMA1/P1-DIMMB1, P1-DIMMC1/P1-DIMMD1 +

Any memory pairs in P1-DIMMA2/P1-DIMMB2/P1-DIMMC2/P1-DIMMD2 slot

CPU1 + CPU2: P1-DIMMA1/P1-DIMMB1, P2-DIMME1/P2-DIMMF1

CPU1 + CPU2: P1-DIMMA1/P1-DIMMB1/P1-DIMMC1/P1-DIMMD1, P2-DIMME1/P2-DIMMF1

2 CPUs & 8 DIMMs

2 CPUs &

8~16 DIMMs

2 CPUs & 16 DIMMs

CPU1 + CPU2: P1-DIMMA1/P1-DIMMB1/P1-DIMMC1/P1-DIMMD1, P2-DIMME1/P2-DIMMF1/P2-DIMMG1/P2-DIMMH1

+ Any memory pairs in P1, P2 DIMM slots

CPU1 + CPU2: P1-DIMMA1/P1-DIMMB1/P1-DIMMC1/P1-DIMMD1, P2-DIMME1/P2-DIMMF1/P2-DIMMG1/P2-DIMMH1,

P1-DIMMA2/P1-DIMMB2/P1-DIMMC2/P1-DIMMD2, P2-DIMME2/P2-DIMMF2/P2-DIMMG2/P2-DIMMH2

Processors and their Corresponding Memory Modules

CPU# Corresponding DIMM Modules

CPU 1 P1-DIMMA1

CPU 2 P2-DIMME1

P1-DIMMB1

P2-DIMMF1

P1-DIMMC1

P2-DIMMG1

P1-DIMMD1

P2-DIMMH1

P1-DIMMA2

P2-DIMME2

P1-DIMMB2

P2-DIMMF2

P1-DIMMC2

P2-DIMMG2

P1-DIMMD2

P2-DIMMH2

Nodes and Corresponding Hard Drives

Description

No.

DescriptionNo.

SXB1: S-SATA 0-2/PCI-E 3.0 p1-x16 Slot supported by CPU2

P2-DIMME1/P2-DIMME2 slot

P2-DIMMF1/P2-DIMMF2 slot

Slot1: CPU2 Slot1 PCI-E 3.0 x16

JBT1: CMOS Clear

Slot2: CPU2 Slot2 PCI-E 3.0 x8

CPU2

InfiniBand (FDR) Connector (6028TP-HC1FR only)

Gigabit LAN1/LAN2 or 10G Base-T Connector (6028TP-HC1TR only)

S-SATA3: SATA DOM (Disk_On_Module) with Power-pin Connector

JSD1: SATA DOM (Device_on_Module) Power Connector

P2-DIMMH1/P2-DIMMH2 slot

P2-DIMMG1/P1-DIMMG2 slot

P1-DIMMA1/P1-DIMMA2 slot

P1-DIMMB1/P1-DIMMB2 slot

CPU1 (Install CPU1 first)

P1-DIMMC1/P1-DIMMC2 slot

P1-DIMMD1/P1-DIMMD2 slot

SXB2: I-SATA 0-5/PCI-E 3.0 p1-x8 Slot supported by CPU1

124

0 Slot

Low-Profile PCI-E Slot

IPMI LAN Port

Power Supply Module

UID Button

VGA Connector

InfiniBand Port (6028TP-HC1FR only)

G_LAN or 10G Base-T Connector (6028TP-HC1TR only)

USB Ports

Video adapter missing or

with faulty memory

SNK-P0057PS for CPU2

SNK-P0047PSM for CPU1

(Close to fan)

Screw #B

Screw #D

Screw #A

Screw #C

Screw #B

Screw #D

Screw #C

Screw #A

69 7

1 continuous beep System Overheat System Overheat

JBT1

P1-DIMMB2

S-SATA3

COM1

JIPMB1

FAN3

FAN4

JSD1

JTPM1

JF1

UID_LED1

BMC_HB_LED1

JPG1

JPB1

JVRM2

JVRM1

JWD1

JPL1

/CPU2 PCI-E 3.0 X16)

(CPU2 SLOT1 PCI-E 3.0 X16)

PCI-E 3.0 X8)(CPU2 SLOT2

UID SW

BATTERY

BIOS

BMC

QSFP

LAN1/LAN2

10G/1G

(3.0)USB0/1

IPMI_LAN

SATA DOM+POWER

TPM/PORT80

CPU2 VRM_HS1

CPLD

P2-DIMMG1

P2-DIMMH2

P2-DIMMH1

P2-DIMMG2

P2-DIMMF2

P2-DIMME1

P2-DIMME 2

P2-DIMMF1

P1-DIMMD2

P1-DIMMD1

P1-DIMMC2

P1-DIMMC1

P1-DIMMB1

P1-DIMMA2

P1-DIMMA1

/CPU1PCI-E 3.0 X8)(I-SATA0~5

CPU2

CPU1

LAN CTRL

PCH

IB_LINK LED1

IB_ACT_LED1

(S-SATA0~2

SXB1 SXB2

Slot1 Slot2

X10DRT-P Series

Rev. 1.02

1516

171819

VGA

SXB1

SXB2

5 6 7 8 119 10

P t g I / IMM y es opula in RD MM LRD Memor Modul

In Suppote 5-2600v er cess Meml E 3 S ies Pro or ory rt

Type Ranks

Per

DIMM

& Data

Width

DIMM

Capacity (GB)

Speed (MT/s), Voltage (V), Slot per Channel

(SPC) and DIMM Per Channel (DPC)

1 Slot Per

Channel

2 Slots Per Channel

1DPC 1DPC 2DPC

4Gb 8Gb 1.2V 1.2V 1.2V

RDIMM SRx4 8GB 16GB 2133 MHz 2133 MHz 1866 MHz

RDIMM SRx8 4GB 8GB 2133 MHz 2133 MHz 1866 MHz

RDIMM DRx8 8GB 16GB 2133 MHz 2133 MHz 1866 MHz

RDIMM DRx4 16GB 32GB 2133 MHz 2133 MHz 1866 MHz

LRDIMM QRx4 32GB 64GB 2133 MHz 2133 MHz 2133 MHz

Hard Drive Signal

Hard Drive Fail

Power Button

LAN LED

Alert

UID

Description

No.

MB:D

MB:B

MB:C

MB:A

Node A

Node B

Node C

Node D

Motherboard Drawer Locations in the Chassis

Motherboard B

Controls HDDs B1 to B6

Motherboard D

Controls HDDs D1 to D6

Motherboard A

Controls HDDs A1 to A6

Motherboard C

Controls HDDs C1 to C6

ÌMNL-1664-QRG&Î

Note:

1. Install CPU1 first.

2. In order to support PCI-e and Zero slots, two CPUs must be installed.

ID tag

Product specificaties

Merk:	Supermicro
Categorie:	Server
Model:	SuperServer 6028TP-HC1TR
Kleur van het product:	Zwart
Breedte:	438 mm
Diepte:	762 mm
Hoogte:	88 mm
LED-indicatoren:	Ja
Aan/uitschakelaar:	Ja
Processorfamilie:	Intel® Xeon® E5 v3
Ethernet LAN:	Ja
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	3
Netvoeding:	2000 W
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Temperatuur bij opslag:	-40 - 70 °C
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	2
Processor socket:	LGA 2011 (Socket R)
Systeembus:	9.6 GT/s
Maximum intern geheugen:	1000 GB
On-board graphics adapter model:	Aspeed AST2400
Luchtvochtigheid bij opslag:	5 - 95 procent
Type behuizing:	Rack (2U)
ECC:	Ja
Ethernet interface type:	Fast Ethernet, Gigabit Ethernet
Chipset moederbord:	Intel® C612
PCI Express x16 slots:	1
Koperen ethernetbekabelingstechnologie:	1000BASE-T, 100BASE-TX, 10BASE-T
Seriële poort(en):	1
Geheugen voltage:	1.2 V
LAN controller:	Intel® X540
Soorten RAID:	0, 1,5, 10
Geheugenbus:	72 Bit
Aantal SATA III connectors:	3
Compatibele processors:	Intel® Xeon®
Aantal ondersteunde processoren:	2
Intel® Xeon series:	E5-2600
Aantal DIMM sloten:	16
Aantal storage drives ondersteund:	3
Opslagschijf afmetingen ondersteund:	3.5 "
Ondersteunde geheugen types:	DDR4-SDRAM
Hot-swap HDD bays:	Ja
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
BIOS type:	AMI
Grootte BIOS-geheugen:	128 Mbit
ACPI version:	2.0
IPMI LAN (RJ-45) port:	Ja
BIOS-functies:	UEFI