Supermicro SuperServer 5019C-MR Handleiding

Supermicro Server SuperServer 5019C-MR

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro SuperServer 5019C-MR (16 pagina's) in de categorie Server. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

Information for Lot 9 of d )ErP (Eco esign

This addresses Ecodesign addendum European Union (EU) requirements for servers and storage products.

All data and ratings within this addendum are in reference only to the in thSupermicro product(s) e

manual. the The below information conforms to requirements laid down in Annex II of Commission

Regulation . 2019/424

3(1)(a): See Section 1.1 of the system manual for the product type.

3(1)(b): e See the title page and preface of th system manual for trademark and the

manufacturer’s address.

3(1)(c): See the title page of the system manual for product model number(s).

3(1)(d): See the serial number on the physical system to determine the year . of manufacture

3(1)(e-j ): PSU Efficiency V ) (f and Power Factor alue (Table rom 80 Plus report)

PSU Model #: PWS- - 407 1R

Watts: 400W

PSU E fficiency

P Fower actor

% of R Lated oad

% % % %10 20 50 100

50 %

Single -Output (AC DC)

85.64%

92.05%

94.43%

93.17%

0.98

System (EUT) E P fficiency in I Sdle tate ower (Table)

Representative

Configurations

Measured Idle State

Power (W)

Calculated Idle Power Allowance

(W)

High-End Performance

Configuration

68.4

214.55

Typical Configuration

N/A

Low-End Performance

Configuration

45.2

180.33

System E(EUT) fficiency in A Sctive tate P ower (Table)

Representative

Configurations

Active tate S

E Sfficiency core

(Effserver)

Minimum A S ctive tate Efficiency

High-End Performance

Configuration

14.4

Typical Configuration

N/A

Low-End Performance

Configuration

13.7

3(1)( ): k is . The operating condition class A2

Dry bulb temp °C

Humidity range, non condensing-

Operating

condition

class

Allowable

range

Recom 

mended

range

Allowable range

Recommended range

Max dew

point (°C)

Maximum

rate of

change

(°

C/hr)

15 32-

18 27-

–

12 and °C P Dew oint (DP)

8 % relative humidity (RH) to

17 ° and 80 C DP % RH

–

9 °C DP to

15 °C and DP

60 % RH

5/20

10 35-

18 27-

–

12 and °C DP 8 % RH to

21 and 80 °C DP % RH

Same as A1

5/20

5-40

18 27-

–

12 and °C DP 8 % RH to

24 and 85 °C DP % RH

Same as A1

5/20

5-45

18 27-

–

12 and °C DP 8 % RH to

24 and 90 °C DP % RH

Same as A1

5/20

3(1)( ): l The idle state power at the higher boundary temperature of the operating conditions

class is W. 80.71

3(1)( ): m The active state efficiency and performance a minimum of is 13.7.

3(1)(n): There are two methods by which a user can securely delete data from this system. The

user performing secure data deletion should be an IT professional.

The first is with a Unified Extensible Firmware Interface (UEFI) shell utility. This utility

works on X10/X11/H11/H12/M11 motherboard series with onboard SATA/NVMe devices.

Any user may access and download this y through following link: utilit

https://www.supermicro.com/about/policies/disclaimer.cfm?url=/wftp/utility/Lot9_Secure

_Data_Deletion_Utility/

Download the shell utility package and extract it to a USB flash drive, then plug the drive

into the server for which secure data deletion is necessary. Then turn the system on.

Navigate to the BIOS setup menu, then place the server system into the UEFI shell

environment. Follow the instructions in the README file to invoke the utility and

complete the deletion.

The second method is through the secure data deletion tool provided by the original

manufacturer of the hard drive. This should be used in a scenario where the shell utility

is not applicable. Each manufacturer should have the tool available on their website. If

needed, please look on the hard drive label for the name of the manufacturer and model

informatio n.

3(1)( ): o List of recommended combinations of blade servers with chassis: N/A.

3(1)(p): List of all current SKUs within this product family: N/A.

3(3)(a): There is no use of cobalt in batteries in this product.

The indicative weight range of eodymium in the HDD is n 0.0 if manufactured by Western

Digital, and is between 5- 25 grams if manufactured by Seagate.

3(3)(b): Please see the disassembly instructions on the next page.

Product specificaties

Merk:	Supermicro
Categorie:	Server
Model:	SuperServer 5019C-MR
Kleur van het product:	Zwart
Gewicht:	9530 g
Breedte:	437 mm
Diepte:	503 mm
Hoogte:	43 mm
Gewicht verpakking:	15420 g
LED-indicatoren:	Ja
Stroom:	3 - 6 A
Aan/uitschakelaar:	Ja
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Netvoeding:	400 W
Duurzaamheidscertificaten:	RoHS
Plug and play:	Ja
Type processor:	Nee
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Temperatuur bij opslag:	-40 - 70 °C
Aantal ventilatoren:	4 ventilator(en)
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	2
Processor socket:	LGA 1151 (Socket H4)
PCI Express slots versie:	3.0
ECC ondersteund door processor:	Ja
Maximum intern geheugen:	128 GB
On-board graphics adapter model:	Aspeed AST2500
Luchtvochtigheid bij opslag:	5 - 95 procent
Reset button:	Ja
Type behuizing:	Rack (1U)
80 PLUS certificatie:	80 PLUS Platinum
Redundante voeding:	Ja
ECC:	Ja
Ethernet interface type:	Fast Ethernet, Gigabit Ethernet
Chipset moederbord:	Intel C246
Trusted Platform Module (TPM):	Ja
Type koeling:	Actief
PCI Express x16 (Gen 3.x) slots:	1
Aantal 3.5" bays:	4
Aantal ondersteunde redundante voedingen:	1
LAN controller:	Intel® I210-AT
Soorten RAID:	0, 1,5, 10
Aantal hoofdvoedingen:	1
Aantal SATA III connectors:	6
Compatibele processors:	Intel Celeron, Intel Core i3, Intel Pentium, Intel Xeon
Aantal ondersteunde processoren:	1
Maximum UDIMM geheugen:	128 GB
Aantal DIMM sloten:	4
Ondersteunende RDIMM klok snelheden:	2133,2400,2666 MHz
Ondersteunend DIMM module capaciteiten:	4GB, 8GB, 16GB, 32GB
Aantal storage drives ondersteund:	4
Opslagschijf afmetingen ondersteund:	3.5 "
Ondersteunde geheugen types:	DDR4-SDRAM
Hot-swap HDD bays:	Ja
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Aantal geïnstalleerde redundante voedingen:	1
Code geharmoniseerd systeem (HS):	84714100
Trusted Platform Module (TPM) version:	2.0
Ventilator diameter:	40 mm
Ondersteunde types opslag-drives:	HDD & SSD
BIOS type:	UEFI
Grootte BIOS-geheugen:	256 Mbit
ACPI version:	6.0
Systeem Management BIOS (SMBIOS) versie:	2.7
Aantal COM-poorten:	1
PC gezondheids monitor:	CPU, FAN, Temperature
Aantal M.2 (M) slots:	2
DC output stroom (+ 12 V):	33 A
Intelligent Platform Management Interface (IPMI) support:	Ja
Geïntegreerde BMC met IPMI:	Ja
IPMI LAN (RJ-45) port:	Ja
Afmetingen voeding (BxDxH):	54.5 x 220 x 40 mm
BIOS-functies:	PCI 3.0, Plug & Play, SMBIOS 2.7, UEFI
UEFI-versie:	2.7