Sunnydaze Decor GSI-798 Handleiding

Bekijk gratis de handleiding van Sunnydaze Decor GSI-798 (2 pagina’s), behorend tot de categorie Waterpomp. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.5 sterren uit 6 reviews. Heb je een vraag over Sunnydaze Decor GSI-798 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

SPQ1390Page 1 / 2

LAYERED SLATE PYRAMID

OUTDOOR WATER FOUNTAIN AND LED LIGHT

GSI-798

Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.

Select a smooth, level surface to place the fountain.



Note: When rst plugged in, there may be air in the pump. It may take several moments for trapped air to escape, allowing water to ow.

G

A

B

C

D

E

F

CONNECT

CONNECT

NOTE:The water tubing is built into the pyramid topper. Take care when

handling the water tube; detaching the water tube from the fountain topper will

damage the fountain and void the product warranty.

Slate is a natural product; the colors and texture of each piece are unique so no two

fountains will look the same. Variations in the slate colors and textures are not a cause

for return.

Each fountain is cut from large slabs of slate. Spalling (aking) may occur naturally

over time, and/or if the slate is dropped. Use care when unpacking and assembling

this fountain.



APyramid Topper1

BFinger Light1

CElectric Submersible Pump1

DBasin1

EPedestal Top1

FPedestal Bottom1

GDecorative Stones1 PK

ASSEMBLY

1. Place Pedestal Top (E) onto Pedestal Bottom (F).

2. Gently set Basin (D) onto the pedestal.

3. Run Pump (C) power cord down the center of the basin, through the

pedestal and under the groove in the back of the pedestal.

4. Connect Finger Light (B) to the short cable on the pump.

5. Insert the light into the underside of Pyramid Topper (A).

6. Connect Pump (C) to the water tube in Pyramid Topper (A) and

gently place the topper onto the basin.

7. Rinse Decorative Stones (G) with clean water and gently place

them inside the basin.

8. Fill the fountain with enough water to keep the pump fully submerged

during operation; approximately 2 gallons.

9. Firmly connect the AC Adapter to the pump power cord and plug it

into a properly grounded GFCI outlet.

2-PERSON

ASSEMBLY

RECOMMENDED

09/2021 AR

Purchase Date: / / Order/Customer Reference Number:

Inspect packaging to ensure all

parts are accounted for before

disposing of packing materials.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement

parts or products can be requested within the 1-year warranty period. Proof of purchase must be provided. This

includes the date of the purchase as well as photos of the product defect. Photos are used to determine the cause of

the defect and to provide future quality control. The request will be reviewed, and replacement pieces will be sent at

our discretion. For warranty information, visit https://tiny.cc/SunnydazeWarranty

If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:

customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact

Product specificaties