Sun Joe HJ605CC-RM Handleiding

Sun Joe Grastrimmer HJ605CC-RM

Lees hieronder de 📖 handleiding in het Nederlandse voor Sun Joe HJ605CC-RM (20 pagina's) in de categorie Grastrimmer. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20

Model HJ605CC-RM Form No. SJ-HJ605CC-RM-880E-MR7-V2

A Division of Snow Joe®, LLC

OPERATOR’S MANUAL

2-IN-1 CORDLESS TELESCOPING

GRASS SHEARS + HEDGE TRIMMER

7.2V LITHIUM-ION

Model HJ605CC-RM Form No. SJ-HJ605CC-RM-880E-MR7-V2

®, LLC

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

2-IN-1 CORDLESS TELESCOPING

GRASS SHEARS + HEDGE TRIMMER

7.2V LITHIUM-ION

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

Read All Instructions

mWARNING! When using cordless yard tools, basic

safety precautions should always be followed to reduce the

risk of re, electric shock and personal injury, including the

following:

1. Avoid Dangerous Environment – Don’t use appliances in

damp or wet locations.

2. Don’t Use In Rain.

3. Keep Children Away – All visitors should be kept at a

distance from work area.

4. Dress Properly – Do not wear loose clothing or jewelry.

They can be caught in moving parts. Use of rubber gloves

and substantial footwear is recommended when working

outdoors. Wear protective hair covering to contain long

hair.

5. Use Safety Glasses – Always use face or dust mask if

operation is dusty.

6. Use Right Appliance – Do not use appliance for any job

except that for which it is intended.

7. Avoid Unintentional Starting – Don’t carry plugged-in

appliance with nger on switch. Be sure switch is o when

plugging in.

8. Don’t grasp the exposed cutting blades or cutting

edges when picking up or holding the appliance. (For

grass shears and similar appliances only.)

9. Don’t Force Appliance – It will do the job better and with

less likelihood of a risk of injury at the rate for which it was

designed.

10. Don’t overreach – Keep proper footing and balance at all

times.

11. Stay Alert – Watch what you are doing. Use common

sense. Do not operate appliance when you are tired.

12. Store Idle Appliances Indoors – When not in use,

appliances should be stored indoors in dry, and high or

locked-up place – out of reach of children.

13. Maintain Appliance With Care – Keep cutting edge sharp

and clean for best performance and to reduce the risk

of injury. Follow instructions for lubricating and changing

accessories. Inspect appliance cord periodically, and

if damaged, have it repaired by an authorized service

facility. Inspect extension cords periodically and replace if

damaged. Keep handles dry, clean, and free from oil and

grease.

14. Check Damaged Parts – Before further use of the

appliance, a guard or other part that is damaged should

be carefully checked to determine that it will operate

properly and perform its intended function. Check for

alignment of moving parts, binding of moving parts,

breakage of parts, mounting, and any other condition

that may aect its operation. A guard or other part that is

damaged should be properly repaired or replaced by an

authorized service center unless indicated elsewhere in

this manual.

Save These Instructions

General Power Tool Safety Warnings

mWARNING! Read all instructions. Failure to follow all

instructions listed below may result in electric shock, re and/

or serious injury. The term "power tool" in all of the warnings

listed below refers to your mains-operated (corded) power tool

or battery-operated (cordless) power tool.

Work Area Safety

1. Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

2. Do not operate power tools in explosive atmospheres,

such as in the presence of ammable liquids, gases

or dust. Power tools create sparks which may ignite the

dust, liquid or fumes.

3. Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodied plugs and

matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded surfaces

such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is

earthed or grounded.

3. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

4. Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock.

5. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

Personal Safety

1. Stay alert. Watch what you are doing and use common

sense when operating a power tool. Do not use a

power tool while you are tired or under the inuence of

drugs, alcohol or medication. A moment of inattention

while operating power tools may result in serious personal

injury.

2. Use personal equipment. Always wear eye protection.

Protective equipment such as a dust mask, non-skid

safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

3. Prevent unintentional starting. Ensure the switch is in

the o-position before connecting to power source and/

or battery pack, picking up or carrying the tool. Carrying

power tools with your nger on the switch or energising

power tools that have the switch on invites accidents.

4. Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to

a rotating part of the power tool may result in personal

injury.

5. Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool in

unexpected situations.

6. Dress properly. Do not wear loose clothing or jewellery.

Keep your hair, clothing and gloves away from moving

parts. Loose clothes, jewellery or long hair can be caught

in moving parts.

7. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection can

reduce dust-related hazards.

Power Tool Use and Care

1. Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the job

better and safer at the rate for which it was designed.

2. Do not use the power tool if the switch does not turn it

on and o. Any power tool that cannot be controlled with

the switch is dangerous and must be repaired.

3. Disconnect the plug from the power source and/or the

battery pack from the power tool before making any

adjustments, changing accessories, or storing power

tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

4. Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

5. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any other

condition that may aect the power tools operation. If

damaged, have the power tool repaired before use. Many

accidents are caused by poorly maintained power tools.

6. Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to

bind and are easier to control.

7. Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations dierent

from those intended could result in a hazardous situation.

Battery tool use and care

1. Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of re when used with

another battery pack.

2. Use power tools only with specically designated

battery packs. Use of any other battery packs may create

a risk of injury and re.

3. When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys, nails,

screws or other small metal objects, that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a re.

4. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally occurs,

ush with water. If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery may cause

irritation or burns.

Service

1. Have your power tool serviced by a qualied repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

Product specificaties

Merk:	Sun Joe
Categorie:	Grastrimmer
Model:	HJ605CC-RM

Heb je hulp nodig?

Als je hulp nodig hebt met Sun Joe HJ605CC-RM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Grastrimmer Sun Joe

Sun Joe SB601E-RM Handleiding

2 Mei 2023

Sun Joe 24V-GT10-LTE-RM Handleiding

24 April 2023

Sun Joe TRJ601E-RM Handleiding

21 April 2023

Sun Joe TRJ608E-RM Handleiding

3 April 2023

Sun Joe 24V-SSEG-CT-SJG-RM Handleiding

31 Maart 2023

Sun Joe 24V-GT10-CT Handleiding

31 Maart 2023

Sun Joe 24V-SSEG-LTE-SJG-RM Handleiding

30 Maart 2023

Sun Joe ION100V-16ST-CT-RM Handleiding

26 Maart 2023

Sun Joe SB602E Handleiding

22 Maart 2023

Sun Joe 24V-ST14B Handleiding

21 Maart 2023

Handleiding Grastrimmer

Nieuwste handleidingen voor Grastrimmer

Worx WG185E Handleiding

26 April 2024

Worx WG157E Handleiding

26 April 2024

Worx WG183E Handleiding

17 April 2024

Worx WG119E Handleiding

17 April 2024

Shindaiwa T236TS Handleiding

11 April 2024

Fieldmann FZS 2107-E Handleiding

11 April 2024

Shindaiwa B45 Handleiding

11 April 2024

Shindaiwa B45LA Handleiding

11 April 2024

Grizzly ERT 3525 Handleiding

27 Maart 2024

Draper GTP34 Handleiding

27 Maart 2024