Steren USM-8D Handleiding

Steren AV extender USM-8D

Lees hieronder de 📖 handleiding in het Nederlandse voor Steren USM-8D (4 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Installation and

Operation Manual

USM-8D

UHF Consumer Agile Audio-Video Modulator

Operation

Manual

Rev. 03/13

Ph:800-421-6511 www.picodigital.com

USM-8D

Descriptions

Low-cost UHF A/V Agile Modulator adds Satellite, VCR, or Security

Video channels to home distribution network over ultra-band and

UHF band NTSC TV channels 14-83, CATV channels 65-139 –

Double Vestigial Sideband Output 7dBmV minimum, 10dBmV typi-

cal – Low Spurious Distortion – Frequency Stability Video/250KHz,

Audio +3KHz – F-type RF Connectors – RCA type A/V Baseband

Connectors – LED Digital Display – PLL Microprocessor-Control

Front Panel Push-Button Channel Selection – External UL Power

Adapter Input 120V 60Hz 9W - Output 15VDC 300mA – Dimensions

33/8”(L) x 11/ ”8(D) x 33/ ”4(H) – Weight 0.5 lbs

UHF Consumer Agile Audio-Video Modulator

USM-8D

UHF Consumer Agile Audio-Video Modulator

Rev. 03/13

Ph:800-421-6511 www.picodigital.com

USM-8D

Controls/Installation/Selection

Rev. 03/13

Ph:800-421-6511 www.picodigital.com

UHF Consumer Agile Audio-Video Modulator

1. Band Indicator: When the LED is lit the CATV band is on. When it is off the UHF band is on.

2. Channel Up/Down Selection: UHF: Channels 14 – 83. Ultra: Channels 65 – 139

3. Mode Switch: Selects UHF: Channels 14 – 83, Ultra: Channels 65-139 and STD, HRC and IRC formats.

4. Mode Indicator: Indicates STD, HRC or IRC format.

5. Channel Display: Displays channel number and offset format.

6. RF Out: Connect this port to the UHF input of a TV set or cable converter.

7. Audio and Video Inputs: Connect audio and video source to the appropriate input.

8. Power In: Connect an 18Vdc-300mA DC adaptor to this jack.

9. Power Switch: Power on/off switch

Controls

1. Plug in DC power adaptor and connect a cable between adaptor and the USM-8D power jack.

2. Verify the band Indicator located at left of front panel is correctly lit for desired band output.

3. Use UP and DOWN key to select the desired output channel.

4. Connect patch cable between USM-8D video input and your video device source.

5. Connect patch cable between USM-8D audio input and your audio device source.

8. Connect RF OUT to input connection of TV.

Installation

CATV MODE TO TV MODE:

1. Push “MODE” button. Channel number disappears

2. Push channel down button 3 times and red dot will disappear.

3. Push “MODE” button and UHF channel will appear.

4. Push channel up/down buttons for channel of choice.

TV MODE TO CATV MODE:

1. Push button.“MODE”

2. “STD”Push channel up/down button and red dot will appear over

3. “MODE” Push button and CATV channel will appear.

4. Push channel up/down buttons for channel of choice.

OFFSETS AND STANDARD CATV FORMATS:

1. Push “MODE”. Channel number disappears.

2. Use channel up/down buttons to change offset formats.

Channel Selection Ordering Information

USM-8D – UHF Consumer Agile Audio-Video

Modulator

1 4 3 2

6 8 97

Note: When making channel selection, it is required that a chan-

nel higher or lower be skipped from any existing active

channels. This is to avoid co-channel interference.

Product specificaties

Merk:	Steren
Categorie:	AV extender
Model:	USM-8D
Soort bediening:	Knoppen
Soort:	AV-zender
Aan/uitschakelaar:	Ja
Input type:	1x terrestrial + 4x Sat-IF, RCA
Geslacht connector:	Mannelijk/Vrouwelijk
Aantal outputs:	1 uitgang(en)
Ondersteundende kabel types:	Coaxiaal