StarTech.com UNIRAILS1UB Handleiding

Bekijk gratis de handleiding van StarTech.com UNIRAILS1UB (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 8 mensen en kreeg gemiddeld 4.8 sterren uit 3 reviews. Heb je een vraag over StarTech.com UNIRAILS1UB of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: August 23, 2019 10:33 AM

Product Diagram (UNIRAILS1UB)

Component Function

1Adjustable Depth Basic 1U

Universal Server Rail

• Used to securely mount equipment (1U in

height) in a .Server Rack

• Maximum Weight Capacity = 200 lb. (91.7 kg)

2Front Bracket• Used to secure the to a Server RailServer

Rack.

3Back Bracket• Used to secure the to a Server RailServer

Rack.

Requirements

For the latest requirements, please visit www.startech.com/UNIRAILS1UB

• Cage Nut Tool x 1 (Optional)

• Phillips Head Screwdriver x 1

4-Post 1U Universal Adjustable Mounting Depth Rack Rail

Package Contents

• Adjustable Depth Basic 1U Universal Server Rail x 2

• M6-12 Screws x 8

• Cage Nuts x 8

• M6 Plastic Cap Washers x 8

• Quick-Start Guide x 1

Installing the Server Rail

1. Insert the x 4 into the on the front and back of the Cage NutsCage Nut HolesRails

Server Rack.

Note: You can use a to aid in the installation of the.Cage Nut Tool Cage Nuts

2. Align the on the on the with the Screw HoleBack BracketServer RailCage Nuts

(inserted in step 1) on the back on the .RailServer Rack

3. Slide an over-top of theM6 Plastic Cap Washer M6-12 Screw.

4. Insert an through the and into the .M6-12 ScrewServer Rail Screw HoleCage Nut

5. Insert a second through the bottom and M6-12 ScrewWasherServer Rail Screw

HoleCage Nut and into the .

6. Using a tighten the , being careful not to Phillips Head ScrewdriverM6-12 Screws

over-tighten.

7. Align the on the on the with the Screw HoleFront BracketServer RailCage Nuts

(inserted in step 1) on the front on the .RailServer Rack

8. Slide an over-top of theM6 Plastic Cap Washer M6-12 Screw.

9. Insert an through the and into the .M6-12 ScrewServer Rail Screw HoleCage Nut

10. Insert a second through the bottom and M6-12 ScrewWasherServer Rail Screw

HoleCage Nut and into the .

11. Using a tighten the , being careful not to Phillips Head ScrewdriverM6-12 Screws

over-tighten.

12. Repeat Steps 1 - 11 to install the second .Server Rail

2

3

1

Product specificaties