StarTech.com ST1000SPEX2T Handleiding

Bekijk gratis de handleiding van StarTech.com ST1000SPEX2T (2 pagina’s), behorend tot de categorie Netwerkkaart/adapter. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.7 sterren uit 6 reviews. Heb je een vraag over StarTech.com ST1000SPEX2T of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: June 10, 2024

Product ID

ST1000SPEX2T / ST1000SPEX2LT / ST1000SPEXD4T

Port/LED/ConnectorFunction

1Bracket

• Used to secure onto the Host Computer

• Low-Prole Bracket is included

Note: ST1000SPEX2LTships with the Low-Prole

bracket pre-installed

3 Ethernet Port

• Used to connect a to the Network CableNetwork

Card

2

Link/Activity LED

Indicators

• Right LED: Link/Activity

• Solid green: Active link

• Flashing green: Activity

• O: No active link

• Left LED: Link Speed

• Solid green: 1Gbps link

• Solid orange: 10/100Mbps link

4PCIe p1-x1 Connector• Insert into a PCI Express Slot

PCI Express Gigabit Ethernet Network Card

Requirements

For the latest requirements, please visit:

www.startech.com/ST1000SPEX2T

www.startech.com/ST1000SPEX2LT

www.startech.com/ST1000SPEXD4T

• Computer with an available PCI Express Slot (x1, x2, x4, x8, or x16)

Package Contents

• PCIe Network Card x 1

• Low-Prole Bracket or Full-Height Bracket (ST1000SPEX2LT) x 1

• Quick-Start Guide x 1

Installation

Install the PCI Express Card

WARNING!

Static electricity can cause severe damage to PCI Express cards. Ensure proper

grounding before opening the computer case or touching the PCI Express card. Use

an Anti-Static Strap when installing any computer component. If an Anti-Static Strap

isn’t available, discharge built-up static electricity by touching a large grounded metal

surface for several seconds. Handle the PCI Express card by its edges, avoiding contact

with the gold connectors.

1. Turn o the and any that are connected to it (for Computer Peripheral Devices

example, , , etc.).PrintersExternal Hard Drives

2. Unplug the from the back of the .Power Cable Computer

3. Disconnect any that are connected to the .Peripheral Devices Computer

4. Remove the from the . Consult the documentation that came Cover Computer Case

with the for details about how to do this safely.Computer

5. Locate an open and remove the corresponding PCI Express SlotSlot Cover Plate

from the back of the . Consult the documentation that came with Computer Case

the for details about how to do this safely. This card works in PCI Express Computer

x1, x2, x4, x8, or x16 slots.

*Product may vary from image

*ST1000SPEX2T shown

1

3

2

4

Product specificaties