Micro Connect MC-PCIEX1-WG82583 Handleiding
Pagina's 4 Netwerkkaart/adapter
Bekijk de handleiding van Micro Connect MC-PCIEX1-WG82583 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
P/N.: MC-PCIEX1-WG82583
USER Manual
EN ver2.0
PCIe Intel 82583L Gigabit Network Card
- 2 -
Descripon
This PCIe Gigabit Network card is single, compact, low power components that offer a
fully-integrated Gigabit Ethernet Media Access Control and physical layer port. It is
used of Intel high-performance chip WG82583V,and it is uses the PCI Express
architecture and provides a single-Port implementaon in a relavely small area so it
can be used for server and any other personal computers.
Specicaon
Fully compliant with PCI-Express Base Specicaon Revision1.1
Single-Lane(x1)PCI-Express with throughput up to 2.5Gbps
Fully Plug and Play compable
Full-duplex operaon at 10/100/1000Mb/s
Half-duplex operaon at 10/100Mb/s
10/100/1000 data rate auto negotiaon operaon
Fully compliant with IEEE802.3,802.3u,802.3ab
Support full duplex ow control(IEEE802.3x)
Supports IEEE802.1P Layer 2 Priority Encoding
Supports IEEE802.1Q VLAN tagging
IPv4 and IPv6 checksum ooad support
Receive Side Scaling(RSS) with two hardware receive queues
Supports jumbo frame to 9k bytes
Crossover detecon and Auto correcon operaon
Package content
1 x PCIe Intel WG82583V Gigabit network adapter
1 x User’s Manual
1 x CD
1 x Low prole bracket
- 3 -
System Requirements
FreeBSD, Linux, VMware ESXi,XP,Vista,8,8.1,and 10 32/64bit
Windows server 2003/Server2008 R2/Server2012 R2
One available PCIe x1/x4/x8/x16 slot
Cabling Requirements:
Intel 1 Gigabit adapters
For 1000BASE-T or 100BASE-TX.use Category 5 or Category5e wiring,
twisted 4-pair copper:
Make sure you use Category 5 cabling that complies with the TIA-568
wiring specicaon For more informaon on this specicaon.
Length is 100 meters max.
Category 3 wiring supports only 10Mbps
CAUTION: If using less than 4-pair cabling, you must manually congure the
speed and duplex seng of the adapter and the link partner. In
addion,with2-and3-pair cabling the adapter can only achieve speeds of up
to 100Mbps
For 100BASE-TX.use Category 5 wiring.
For10BASE-T.use Category 3 or 5wiring
Hardware installaon
1.Turn o the computer and unplug the power cord
2.Remove the computer cover and the adapter slot cover from the slot that matches
your adapter
3.Insert the adapter edge connector into the slot and secure the bracket to the
chassis
4.Replace the computer cover ,then plug in the power cord
Product specificaties
| Merk: | Micro Connect |
| Categorie: | Netwerkkaart/adapter |
| Model: | MC-PCIEX1-WG82583 |
Heb je hulp nodig?
Als je hulp nodig hebt met Micro Connect MC-PCIEX1-WG82583 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden