StarTech.com O1210I-NETWORK-CARD Handleiding

Bekijk gratis de handleiding van StarTech.com O1210I-NETWORK-CARD (2 pagina’s), behorend tot de categorie Netwerkkaart/adapter. Deze gids werd als nuttig beoordeeld door 10 mensen en kreeg gemiddeld 4.0 sterren uit 3 reviews. Heb je een vraag over StarTech.com O1210I-NETWORK-CARD of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

Manual Revision: September 5, 2024

Product Diagram

O1210I-NETWORK-CARD

ComponentFunction

1Pull Tab

• Pull to remove the from the Network Card

OCP NIC 3.0 Slot

2SFP+ Slot x 2

• Connect a orSFP+ Module, Active Optical Cable,

Direct Attach Copper Cable Network Card to the

• Supports 1Gbps and 10Gbps

3Locking Screw• Secure the card to the Host Server Case

4

4C+ Connector

(OCP NIC 3.0)

• Insert into an on the OCP NIC 3.0 SlotHost Server

2-Port OCP 3.0 10G Open SFP+ Network Card - Intel

Package Contents

• Network Card x 1

• Quick-Start Guide x 1

Requirements

For the latest requirements, please visit: www.StarTech.com/O1210I-NETWORK-CARD

• Host server with an available OCP NIC 3.0 Slot

Installation

Install the Server Network Card

WARNING!

Static Electricity can severely damage. Ensure that you are adequately Network Cards

groundedHost Server CaseServer Network Card before you open your or touch the .

You should wear an oruseanwhen installing any Anti-Static Strap Anti-Static Mat

computer component. If an isn’t available, discharge any built-up Anti-Static Strap

static electricity by touching a large for several seconds. Only Grounded Metal Surface

handle the by its edges and do not touch the gold connectors.Server Network Card

1. Turn o the and any that are connected to it (e.g. Host Server Peripheral Devices

printers, external hard drives, etc.).

2. Unplug the from the back of the , and disconnect any Power Cable Host Server

Peripheral Devices that are connected.

3. Remove the from the . Consult the documentation that came with Cover Server Case

the for details about doing this safely.Host Server

4. Locate an open and remove the corresponding OCP NIC 3.0 Slot Slot Cover Plate

from the back of the .Host Server

5. Gently insert the into the. Turn the Server Network Card OCP NIC 3.0 SlotLocking

Screw Server Network CardServer Case/Chassisto attach the to the back of the .

6. Return the onto the .CoverHost Server

7. Install one or more , , or SFP/SFP+ ModulesActive Optical CablesDirect Attach

Copper CablesSFP+ Slots into the available .

8. Reconnect all of the disconnected in .Peripheral DevicesStep 2

9. Reconnect the to the back of the .Power CableHost Server

10. Turn on the and .Host ServerPeripheral Devices

*Product may vary from image

1

3

2

2

4

Product specificaties