StarTech.com SDMSDRWU3AC Handleiding

StarTech.com Geheugenkaartlezer SDMSDRWU3AC

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com SDMSDRWU3AC (2 pagina's) in de categorie Geheugenkaartlezer. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Quick-start guide

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

Manual Revision: 02/16/2017

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/SDMSDRWU3AC.

Package contents

• 1 x card reader/writer

• 2 x end caps

• 1 x quick-start guide

Requirements

• microSD or SD card

• Computer, tablet, laptop, or smartphone equipped with a USB-C or

USB-A port

Note: To obtain the maximum USB throughput, you must use a

system with a USB 3.0 port.

The SDMSDRWU3AC is OS independent and doesn’t require any

additional drivers or software.

The card reader/writer receives enough power through the USB bus

and doesn’t require an additional power source.

Requirements are subject to change. For the latest requirements,

please visit www.StarTech.com/SDMSDRWU3AC.

SDMSDRWU3AC

USB 3.0 Memory Card Reader/Writer for SD and microSD cards - USB-C and USB-A

*actual product may vary from photos

Introduction

The SDMSDRWU3AC provides a quick and easy way to access

data stored on SD™ cards and microSD™ cards, and supports data

transfer speeds up to 5Gbps. You can use this card reader/writer

with a computer, tablet, laptop, or smartphone that’s enabled with a

USB-C™ or USB-A port.

Product diagram

Removable end cap

USB-C connector

(not pictured)

USB-A connector

(not pictured)

Activity LED

microSD card slot

SD card slot

Removable end cap

About USB 3.0 and USB 3.1 Gen 1

USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard

oers speeds up to 5Gbps. Any mention of USB 3.0 in this manual or

on the StarTech.com website in relation to SDMSDRWU3AC refers to

the 5Gbps USB 3.1 Gen 1 standard.

Note: Data transfer rates are dependent upon the speed of the

memory card you are using and the speed capabilities of the USB

port on your device.

About the LED indicator

The SDMSDRWU3AC features a blue located to the Activity LED

left of the card slots. The blinks to indicate that data is Activity LED

being transferred.

Avoid disconnecting the card reader/writer when the is Activity LED

blinking.

Connect the card reader/writer

1. Gently slide a memory card into the appropriate card slot on the

SDMSDRWU3AC until you feel resistance and the card is fully

inserted.

2. Do one of the following:

• Insert the on the card reader/writer into the USB-C connector

USB-C port on your computer, tablet, laptop, or smartphone.

• Insert the on the card reader/writer into the USB-A connector

USB-A port on your computer, tablet, or laptop.

3. To access the content on your memory card, follow the

instructions specic to the operating system that you’re running.

When you connect the card reader/writer, your system automatically

detects and installs the required software.

Caution! Do not insert two cards into the card reader/writer at the

same time. You can only access the data stored on one card at a time.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

macOS is a trademark of Apple Inc.

microSD is a trademark of SD-3C, LLC.

SD is a trademark of SD-3C, LLC.

USB Type-C and USB-C are trademarks of Wi-Fi Alliance.

Windows is a trademark of Microsoft Corporation in the United States and/or other countries.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Disconnect the card reader/writer

Windows

1. On your desktop, click the Safely Remove Hardware icon.

2. In the list that appears, click the card reader/writer.

3. When a message appears saying that it’s safe to do so, disconnect

the card reader/writer from your laptop or desktop computer.

Caution! If you remove the card reader/writer before it’s safe to do

so, you could experience lost or corrupted data on your memory

card.

macOS

1. Close any open windows that list the contents of the card

reader/writer.

2. On your desktop, click and drag the icon to the USB storage trash

can icon.

3. Wait ten seconds and then remove the card reader/writer.

Caution! If you remove the card reader/writer before it’s safe to do

so, you could experience lost or corrupted data on your memory

card.

Troubleshooting

I can’t access the data stored on my cards

If you’re experiencing issues when you try to access the data stored

on your memory card, consider the following:

• Some operating systems may not support all le formats. Make

sure that your operating system supports the type of memory card

that you’re using and the les that you’re trying to access.

• If you insert two memory cards into the card reader/writer at the

same time, you won’t be able to access the data on both cards

simultaneously. Make sure that you only insert one memory card

into the card reader/writer at a time.

Note: The card reader/writer prioritizes card access based on the last

memory card that you inserted.

Product specificaties

Merk:	StarTech.com
Categorie:	Geheugenkaartlezer
Model:	SDMSDRWU3AC
Kleur van het product:	Zwart
Gewicht:	11.8 g
Breedte:	20 mm
Diepte:	78 mm
Hoogte:	11 mm
Gewicht verpakking:	38 g
Breedte verpakking:	70 mm
Diepte verpakking:	105 mm
Hoogte verpakking:	20 mm
Materiaal behuizing:	Kunststof
LED-indicatoren:	Activity, Power
Maximale capaciteit van de geheugenkaart:	2000 GB
Compatibele geheugenkaarten:	MMC, MicroSD (TransFlash), MicroSDHC, MicroSDXC, SD, SDHC, SDXC
Snelstartgids:	Ja
Certificering:	CE, FCC, RoHS
Plug and play:	Ja
Temperatuur bij opslag:	-20 - 70 °C
Intern:	Nee
Soort aansluiting:	USB 3.2 Gen 1 (3.1 Gen 1) Type-A/Type-C
(Buitenste) hoofdverpakking hoogte:	175 mm
(Buitenste) hoofdverpakking breedte:	290 mm
(Buitenste) hoofdverpakking lengte:	425 mm
Hoeveelheid per (buitenste) hoofdverpakking:	100 stuk(s)
Overdrachtssnelheid:	5000 Mbit/s
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	50 - 90 procent
Code geharmoniseerd systeem (HS):	84719000
Chips organisatie:	Genesys Logic - GL3224