StarTech.com FCREADMICRO Handleiding

Bekijk gratis de handleiding van StarTech.com FCREADMICRO (2 pagina’s), behorend tot de categorie Geheugenkaartlezer. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.7 sterren uit 6 reviews. Heb je een vraag over StarTech.com FCREADMICRO of wil je andere gebruikers van dit product iets vragen? Stel een vraag

USB Multi Media Memory Card Reader Adapter

FCREADMICRO

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l’utilisateur - fr.startech.com

ES:Guía del usuario - es.startech.com

IT: Guida per l’uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Installation

1. Ensure the host computer is powered. Insert the FCREADMICRO

USB type ‘A’ connector into an available USB port on the host

computer.

2. The computer operating system will recognize that the Card

Reader has been connected, and will automatically install the

necessary drivers. Once the reader has been connected to the

computer, the red Connection LED will illuminate, until the

reader is removed from the computer, or the operating system is

instructed to eject the connected media.

To ensure the FCREADMICRO has been properly installed on the

host computer:

A. In a Windows® operating environment, browse to the Control

Panel and double-click on the icon (Start -> Control System

Panel -> System). Click on the Hardware tab, then on Device

Manager. Here, you will nd Generic Storage Device USB Device

listed under Disk Drives, and Generic Volume listed under Storage

Volumes.

B. In a MAC OS operating environment, browse to the System

Proler (Go -> Utilities -> System Proler). Click on , Hardware

then on . In the top right pane, click on USBUSB High Speed

Bus; here, you will nd listed.USB Reader

Safe Removal

To prevent damage to the contents of the memory/media card,

please ensure you are following the correct procedure for removing

storage from the operating system you are using.

• In a Windows® operating environment, when the memory/

media card is rst connected, the Safely Remove Hardware icon

will appear. Right-click on the icon, and select Safely Remove

Hardware. When the Safely Remove Hardware window appears,

select , then click on USB Mass Storage DeviceStop. This will, in

turn, open the Stop a Hardware Device window.

Select the USB Mass Storage Device again, and click on , then OK

wait for the operating system to notify you that it can now be

safely removed.

• In a MAC OS operating environment, the added memory cards

will appear on the desktop as disk drives. To safely remove the

indicated drive(s), simply click and drag the icon to the Trash.

A. B.WARNING: Please note that when removing media cards

connected to FCREADMICRO, you are required to remove/

eject the device from within the operating system (i.e.

in Windows, use the Safely Remove Hardware function).

Failure to remove devices properly can result in lost data,

or permanent damage to the card or Card Reader. See Safe

Removal (reverse) for further detail.

Instruction Manual

*actual product may vary from photos

Manual Revision: 01/26/2012

For the most up-to-date information, please visit: www.startech.com

Product specificaties