StarTech.com SATDUP13 Handleiding

Bekijk gratis de handleiding van StarTech.com SATDUP13 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 5.0 sterren uit 5 reviews. Heb je een vraag over StarTech.com SATDUP13 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick Install Guide

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 11/01/2013

For the most up-to-date information, please visit: www.startech.com

Packaging Contents

• 1 x 1 to 3 HDD Duplicator/Eraser

• 4 x SATA Cables

• 1 x Daisy Chain Cable

• 1 x Power Adapter

• 3 x Power Cords (NA, UK, EU)

• 1 x Instruction Manual

WARNING! Hard drives and storage enclosures require careful

handling, especially when being transported. If you are not careful

with your hard disk, lost data may result. Always handle your hard

drive and storage device with caution. Be sure that you are properly

grounded by wearing an anti-static strap when handling computer

components or discharge yourself of any static electricity build-up

by touching a large grounded metal surface (such as the computer

case) for several seconds.

SATDUP13

1 to 3 Standalone Hard Drive Duplicator and Eraser

Hardware Installation

1. Ensure the power switch is set in the o position. Connect the

included power adapter from an available AC power outlet to the

Power Adapter Port on the back of the SATDUP13.

2. Using an included SATA Cable, attach the HDD you would like to

duplicate to the source port (rst port on the left, see below)

3. Using an included SATA Cable, connect up to 3 HDDs you would

like to have over written, or erased to the destination ports. (3

ports from right to left , see below)

WARNING! Any Data remaining on the destination drives will be

over written.

Note: If using less than 3 HDDs, drives should be connected from

left to right leaving port(s) closest to the right unoccupied.

4. Press the power switch to the “On” position, the SATDUP13 is now

ready to use.

Front

1. Display Screen

2. Navigation buttons

3. OK button

4. Esc button

5. SATA HDD source port

6. SATA HDD destination ports

1

Back

1. Power Switch

2. Power Adapter Port

3. Daisy Chain ports

1

Hardware Operation

Hard Drive Duplication

1. Using the Navigation buttons, locate “HDD Duplicator 1. Copy”

and press OK. Default copy mode is “System and Files”

NOTE: Please visit www.startech.com/downloads for the full

set of operating instructions.

Product specificaties