StarTech.com CABSHF2POSTV2 Handleiding

Bekijk gratis de handleiding van StarTech.com CABSHF2POSTV2 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 27 mensen en kreeg gemiddeld 4.5 sterren uit 9 reviews. Heb je een vraag over StarTech.com CABSHF2POSTV2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: November 27, 2019 1:42 PM

Product Diagram (CABSHF2POSTV2)

ComponentFunction

1Mounting Bracket• Used to mount the Shelf within a Rack.

2Shelf

• Used to support equipment within a Rack.

• Maximum weight capacity = 75 lb (34 kg).

3Mounting Holes• Used to secure the Shelf to a Rack.

4Air Vents

• Used to allow air to pass through the Air Vents,

providing cooling for the equipment on the

Shelf.

Requirements

For the latest requirements, please visit www.startech.com/CABSHF2POSTV2

• (Optional) Cage Nut Tool x 1

• Phillips Head Screwdriver x 1

Installing the Shelf in a Rack

1. Determine the location within the Rack that you want to install the Shelf.

Note: The Shelf requires 2U of free space to mount within a Rack.

2. If the Rack you are using has Square Mounting Holes, insert the M6 Cage Nuts (2

per Mounting Rail) into the Square Mounting Holes on the Mounting Rails. Insert

one side of the M6 Cage Nut (included) into the Square Mounting Hole and push the

other side into the Square Mounting Hole, until it locks into place.

2-Post Rack Shelf with 20 Inch Depth

Note: Use a Cage Nut Tool if you are having issues installing the M6 Cages Nuts

into the Rack.

3. Align the Mounting Holes on the Bracket with the M6 Cages Nuts (2 per

Mounting Rail) installed in step 2.

4. Insert an M6 Screw (2 per Mounting Rail) through a M6 Plastic Washer (included)

and through the Mounting Holes on the Bracket and into the M6 Cage Nut.

5. Using a Phillips Head Screwdriver tighten the M6 Screws, being careful not to

over-tighten.

Product Dimensions

Top

Front

1

2

3

4

Product specificaties