StarTech.com PEXUSB312A Handleiding

Bekijk gratis de handleiding van StarTech.com PEXUSB312A (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.6 sterren uit 3 reviews. Heb je een vraag over StarTech.com PEXUSB312A of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Instruction manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 06/09/2015

For the latest information, technical specications, and support for

this product, please visit www.startech.com/PEXUSB312A.

Packaging contents

• 1 x 2-port USB 3.1 card

• 1 x low-prole bracket

• 1 x instruction manual

System requirements

• Computer with an available PCI Express® slot (x4, x8, x16)

• 15-pin SATA power connector

• Any of the following operating systems:

• Windows® 7 (32-bit or 64-bit)

• Windows 8 (32-bit or 64-bit)

• Windows 8.1 (32-bit and 64-bit)

• Windows Server 2012

• Linux® 3.5

Operating system requirements are subject to change. For the latest

requirements, please visit .www.startech.com/PEXUSB312A

PEXUSB312A

2-port USB 3.1 Gen 2 card - 10 Gbps - 2x USB-A - PCIe

*actual product may vary from photos

Product diagram

USB 3.1 connector

SATA power connector

Installation

Install the USB 3.1 card

WARNING!

USB cards can be severely damaged by static electricity. Make sure

that you’re properly grounded before you open your computer case

or touch your USB card. You should wear an anti-static strap when

you install any computer component. If an anti-static strap isn’t

available, discharge any built-up static electricity by touching a large

grounded metal surface for several seconds. Only handle the USB

card by its edges and don’t touch the gold connectors.

1. Turn o your computer and any devices or peripherals that are

connected to it (for example, printers, external hard drives, and

so on).

2. Unplug the power cable from the back of your computer.

3. Disconnect any peripheral devices that are connected to your

computer.

4. Remove the cover from your computer case. Consult the

documentation that came with your computer for details about

how to do this safely.

5. Locate an open PCI Express slot and remove the corresponding

metal cover plate from the back of your computer case. Consult

the documentation that came with your computer for details

about how to do this safely. This card works in PCI Express slots of

additional lanes (x4, x8, or x16 slots).

6. Gently insert the card into the open PCI Express slot and fasten

the bracket to the back of the case.

Note: If you install the card into a small form factor or a low-prole

desktop system, it may be necessary to replace the preinstalled

standard-prole bracket with the included low-prole (half-height)

installation bracket.

7. Connect a 15-pin SATA power connector from your computer’s

power supply to the SATA power connector on the card.

8. Place the cover back onto your computer case.

9. Reconnect the power cable to the back of your computer.

10. Reconnect all of the peripheral devices that you disconnected in

step 3.

11. Turn on your computer.

Note: If a power source isn’t connected to your USB card, your

system won’ t recognize it.

The available bandwidth ( Gbps) is shared equally between the two x

ports.

PCIe p1-x4

connector

Product specificaties