StarTech.com PEXUSB311A1E Handleiding

Bekijk gratis de handleiding van StarTech.com PEXUSB311A1E (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.4 sterren uit 5 reviews. Heb je een vraag over StarTech.com PEXUSB311A1E of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-start guide

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 10/13/2017

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/PEXUSB311A1E

Package contents

• 1 x controller card

• 1 x low-prole bracket

• 1 x quick-start guide

Requirements

• Computer with an available PCI Express slot (x4, x8, x16)

• Any of the following operating systems:

• Windows® 7 (32-bit or 64-bit)

• Windows 8 (32-bit or 64-bit)

• Windows 8.1 (32-bit and 64-bit)

• Windows 10 (32-bit and 64-bit)

• Windows Server 2012

• macOS® 10.9

• macOS 10.10

• Linux® 3.5 to 4.4 (LTS versions only)

Operating system requirements are subject to change. For the latest

requirements, please visit www.StarTech.com/PEXUSB311A1E.

PEXUSB311A1E

2-Port USB 3.1 (10Gbps) + eSATA Controller Card - 1x USB-A, 1x eSATA - PCIe

*actual product may vary from photos

Product diagram

USB 3.1 Type-A

connector

Hardware installation

Install the controller card

WARNING!

Controller cards can be severely damaged by static electricity. Make

sure that you’re properly grounded before you open your computer

case or touch your controller card. You should wear an anti-static

strap when you install any computer component. If an anti-static

strap isn’t available, discharge any built-up static electricity by

touching a large grounded metal surface for several seconds. Only

handle the controller card by its edges and don’t touch the gold

connectors.

1. Turn o your computer and any devices or peripherals that are

connected to it (for example, printers, external hard drives, and

so on).

2. Unplug the power cable from the back of your computer.

3. Disconnect any peripheral devices that are connected to your

computer.

4. Remove the cover from your computer case. Consult the

documentation that came with your computer for details about

how to do this safely.

5. Locate an open PCI Express slot and remove the corresponding

metal cover plate from the back of your computer case. Consult

the documentation that came with your computer for details

about how to do this safely. This card works in PCI Express slots of

additional lanes (x4, x8, or x16 slots).

6. Gently insert the card into the open PCI Express slot and fasten

the bracket to the back of the case.

Note: If you install the card into a small form factor or a low-

prole desktop system, it may be necessary to replace the pre-

installed standard-prole bracket with the included low-prole

(half-height) installation bracket.

7. Place the cover back onto your computer case.

8. Reconnect the power cable to the back of your computer

9. Reconnect all of the peripheral devices that you disconnected in

step 3.

PCIe p1-x4

connector

eSATA (6Gbps)

connector

Product specificaties