StarTech.com PAX2235-WIFI-6E-CARD Handleiding

Bekijk gratis de handleiding van StarTech.com PAX2235-WIFI-6E-CARD (2 pagina’s), behorend tot de categorie Netwerkkaart/adapter. Deze gids werd als nuttig beoordeeld door 52 mensen en kreeg gemiddeld 4.6 sterren uit 7 reviews. Heb je een vraag over StarTech.com PAX2235-WIFI-6E-CARD of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: October 6, 2023 11:25 AM

Product ID

PAX2235-WIFI-6E-CARD

PCIe Wi-Fi 6/6E Network Adapter Card - 802.11ax

ComponentFunction

1LED Indicator

• Solid Green: PCIe Wi-Fi Card is installed and

receiving power

2Full Prole Bracket

• Secure the PCIe Wi-Fi Card to the Computer

Case

3Antenna Connectors

• Connect the Antenna Cables from the Magnetic

Antenna Stand

4Bluetooth USB 2.0 Header

• Connect to a USB 2.0 Header on the Computer’s

Motherboard, using the included Bluetooth

Cable

5PCIe p1-x1 Connector

• Connect the PCIe Wi-Fi Card to a PCIe Slot in a

Computer

6Magnetic Antenna Stand• Provides adjustable placement of the Antenna

Requirements

For the latest drivers/software, technical specications, and declarations of

conformance, please visit: www.StarTech.com/PAX2235-WIFI-6E-CARD

Package Contents

• PCIe Wi-Fi Card x 1

• Magnetic Antenna Stand x 1

• Bluetooth Cable x 1

• Low-Prole Bracket x 1

• Quick-Start Guide x 1

Installation

Warning: PCIe Cards can be damaged by static electricity. Ensure that the Installer

is properly grounded before they open the Computer Case or touch the PCIe Wi-Fi

Card. The Installer should wear an Anti-Static Strap when installing any computer

component. If an Anti-Static Strap is not available, discharge any built-up static

electricity by touching a large Grounded Metal Surface for several seconds. Only

handle the PCIe Wi-Fi Card by its edges and do not touch the gold connectors.

(Optional) Installing the Low Prole Bracket

Note: By default the Full Prole Bracket is attached to the PCIe Wi-Fi Card.

Depending on the system conguration the Full Prole Bracket may need to be

removed and replaced with the Low Prole Bracket (included).

1. Ensure the Antenna Cables are disconnected from the PCIe Wi-Fi Card.

2. Using a Small Phillips Head Screwdriver, remove the two Bracket Screws securing

the Full Prole Bracket to the PCIe Wi-Fi Card. Set the Bracket Screws aside as

they will be used to attach the Low Prole Bracket.

2

1

3

3

5

6

4

Product specificaties