StarTech.com P041GI-NETWORK-CARD Handleiding

Bekijk gratis de handleiding van StarTech.com P041GI-NETWORK-CARD (2 pagina’s), behorend tot de categorie Netwerkkaart/adapter. Deze gids werd als nuttig beoordeeld door 39 mensen en kreeg gemiddeld 4.5 sterren uit 6 reviews. Heb je een vraag over StarTech.com P041GI-NETWORK-CARD of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

Manual Revision: June 1, 2023

Product Diagram

P041GI-NETWORK-CARD

Port/LED/ConnectorFunction

1Bracket

• Secures the card to the Host Computer Case

• The Full Prole Bracket comes pre-installed

2Open SFP Slot x 4

• Add a MSA-Compliant SFP Transceiver Module

• Supports Fiber or Ethernet 1 Gbps SFPs

3LED Indicators

• LeftLED Indicator is Link Speed

• Solid Green: 1 Gbps

• RightLED Indicator is Link Status

• Solid Green: Active link

• Flashing Green: Activity

4PCIe 2.0 p1-x2 Connector• Insert into a PCI Express Slot on the Host Computer

Package Contents

• Open SFP Network Card x 1

• Quick-Start Guide x 1

4-Port Open SFP Gigabit Network Card

Requirements

For the latest requirements, please visit www.startech.com/P041GI-NETWORK-CARD

• Host computer with an available PCI Express 2.0 or greater slot (x2, x4, x8, or x16)

Installation

Install the PCI Express Card

WARNING!

Static Electricity can severely damage PCI Express Cards. Ensure that you are

adequately Grounded before you open your Host Computer Case or touch the PCI

Express Card. You should wear an Anti-Static Strap or use an Anti-Static Mat when

installing any Host Computer component. If an Anti-Static Strap isn’t available,

discharge any built-up static electricity by touching a large Grounded Metal Surface

for several seconds. Only handle the PCI Express Card by its edges and don’t touch

the gold connectors.

1. Turn o the Host Computer and any Peripheral Devices that are connected to it

(e.g. printers, external hard drives, etc.).

2. Unplug the Power Cable from the back of the Host Computer.

3. Disconnect any Peripheral Devices that are connected to the Host Computer.

4. Remove the Cover from the Host Computer Case. Consult the documentation that

came with the Host Computer for details about doing this safely.

5. Locate an open PCI Express Slot and remove the corresponding Slot Cover Plate

from the back of the Host Computer Case.

Note: Consult the documentation that came with the Host Computer for details

about doing this safely. This card works in PCI Express x2, x4, x8, or x16 Slots.

6. Gently insert the PCI Express Card into the open PCI Express Slot and fasten the

Bracket to the back of the Host Computer Case.

7. Return the Cover onto the Host Computer Case.

8. Insert a compatible 1G SFP Transceiver Module, into the SFP Slot onto the PCI

Express Card.

9. Reconnect the Power Cable to the back of the Host Computer.

10. Reconnect all of the Peripheral Devices disconnected in Step 3.

11. Connect a Fiber or Ethernet Network Cable depending on the SFP Transceiver

Module used. Connect the other end of the cable to a Network Device.

3

*Product may vary from image

1

4

2

Product specificaties