StarTech.com MSDREADU3C Handleiding

Bekijk gratis de handleiding van StarTech.com MSDREADU3C (2 pagina’s), behorend tot de categorie Geheugenkaartlezer. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.4 sterren uit 6 reviews. Heb je een vraag over StarTech.com MSDREADU3C of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Instruction manual

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT:Guida per l’uso - it.startech.com

Manual Revision: 07/10/2016

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/MSDREADU3C.

Package contents

• 1 x USB 3.0 card reader/writer for microSD cards - USB-C

• 1 x quick-start guide

System requirements

• microSD card

• Computer, tablet, or device enabled with a USB Type-C™ port

The MSDREADU3C is OS independent and doesn’t require any

additional drivers or software. The MSDREADU3C receives enough

power through the USB bus and doesn’t require an additional power

source.

System requirements are subject to change. For the latest

requirements, please visit www.startech.com/MSDREADU3C.

MSDREADU3C

USB 3.0 Card Reader/Writer for microSD Cards - USB-C

Make sure that you assemble this product according to the

instructions. Failure to do so might result in personal injury or

property damage.

Introduction

The MSDREADU3C provides a quick and easy way to transfer photos

and videos from a microSD™ card to a computer, tablet, or device

that’s enabled with a USB-C™ port. The MSDREADU3C also provides

a safe and portable alternative to storing your microSD cards when

they’re not in use.

Product diagram

Slot cover

microSD card slot

*actual product may vary from photos

About USB 3.0 and USB 3.1 Gen 1

USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard

oers speeds up to 5Gbps.

Note: Data transfer rates are dependent upon the speed of the

memory card you are using and the speed capabilities of the USB

port on your host device.

Card support

The MSDREADU3C supports the following card types:

• microSD

• T-Flash

Use the MSDREADU3C

1. Remove the Slot cover from the end of the MSDREADU3C.

2. Gently slide a microSD card into the on the USB microSD card slot

card reader until you feel resistance and the card is fully inserted.

3. Replace the Slot cover onto the end of the USB card reader.

4. Insert the on the USB card reader into the USB port USB-C plug

on your computer, tablet, or device.

5. Follow the instructions specic to the OS that you’re running to

access content on the USB card reader.

USB-C plug

Product specificaties