StarTech.com FCREADUOTGDB Handleiding

StarTech.com Geheugenkaartlezer FCREADUOTGDB

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com FCREADUOTGDB (2 pagina's) in de categorie Geheugenkaartlezer. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Instruction manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 08/13/2015

For the latest information, technical specications, and support for

this product, please visit www.startech.com/FCREADUOTGDB.

Packaging contents

• 1 x memory card reader dongle

• 1 x instruction manual

System requirements

• A device (smartphone, tablet, and so on) that is enabled with

Micro USB On-The-Go technology

System requirements are subject to change. For the latest

requirements, please visit www.startech.com/FCREADUOTGDB.

FCREADUOTGDB

Memory Card Reader Dongle - Micro USB On-The-Go

*actual product may vary from photos

Product diagram

Introduction

The memory card reader dongle enables you to connect your

portable devices with USB OTG, such as a smartphone or a tablet, to

a wide variety of memory cards including SD cards, Micro SD cards,

USB ash drives, or HDDs.

Use the memory card reader

To access the data stored on your SD card, Micro SD card, or USB

ash drive, complete the following:

1. Depending on the type of memory card that you’re using, insert

the memory card in the appropriate slot on the memory card

reader.

2. Connect the integrated Micro USB 2.0 cable on the memory card

reader to the Micro USB port on your portable device, such as a

smartphone or tablet.

3. Access the stored data on the connected portable device.

Note: The memory card reader doesn’t require a power source for

standard card reader operations.

Connect a USB peripheral device

1. Connect the USB cable from the peripheral device to the USB A

port on the memory card reader.

2. Connect a Micro USB cable (not included) to the power source

port on the card reader to an available USB power source.

3. If you require additional power, connect the integrated Micro USB

2.0 cable on the memory card reader to the Micro USB port on

your portable device, such as a smartphone or tablet.

About the LED indicators

The memory card reader has two LED indicators located on the top

of the unit. For more information about what the LEDs indicate,

consult the tables below.

Yellow power LED

LED behavior Signies

LED is not illuminated There is no power source connected to

the memory card reader.

LED is illuminated A power source is connected to the

memory card reader.

Blue link and activity LED

LED behavior Signies

LED is not

illuminated

No memory cards are inserted in the

memory card reader.

LED is illuminated A memory card is inserted in the memory

card reader.

LED is blinking The memory card reader is completing a

process.

Micro USB 2.0 input

Power source

port

Micro SD card slot

USB A port

SD card slot

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Product specificaties

Merk:	StarTech.com
Categorie:	Geheugenkaartlezer
Model:	FCREADUOTGDB
Kleur van het product:	Zwart
Breedte:	56 mm
Diepte:	195 mm
Hoogte:	13 mm
Gewicht verpakking:	70 g
Breedte verpakking:	142 mm
Diepte verpakking:	170 mm
Hoogte verpakking:	30 mm
Materiaal behuizing:	Kunststof
LED-indicatoren:	Activity, Link, Power
Type stroombron:	USB
Compatibele geheugenkaarten:	MicroSD (TransFlash), MicroSDHC, MicroSDXC, SD, SDHC, SDXC
Snelstartgids:	Ja
Aantal USB 2.0-poorten:	1
Certificering:	RoHS, CE, FCC
Plug and play:	Ja
Temperatuur bij opslag:	-20 - 60 °C
Intern:	Nee
Soort aansluiting:	USB 2.0
Overdrachtssnelheid:	480 Mbit/s
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 80 procent
Geïntegreerde USB-kabel:	Ja
UASP-ondersteuning:	Nee
Chips organisatie:	GL823U