StarTech.com HB30A10AME Handleiding

Bekijk gratis de handleiding van StarTech.com HB30A10AME (2 pagina’s), behorend tot de categorie USB Hub. Deze gids werd als nuttig beoordeeld door 23 mensen en kreeg gemiddeld 4.9 sterren uit 8 reviews. Heb je een vraag over StarTech.com HB30A10AME of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: June 5, 2019 4:02 PM

Product Diagram (HB30A10AME)

ComponentFunction

12-Wire Terminal Block

• Used to connect an external DC Power Source

(7~24V DC Input) to the .Hub

2Screw Locks (x 10)

• Used to securely lock a to the USB Device

USB-A PortHub on the .

• Center to center 19 Screw Lock Dimensions:

mm, thread size 4 - 40.

3Power LED

• : Indicates that the Hub is receiving Green

power.

4USB-B Host Port

• Used to connect a to the .Host ComputerHub

• Center to center 24 Screw Lock Dimensions:

mm, thread size 4 - 40.

5USB-A Ports (x 10)

• Used to connect ( x 10) to the USB Devices

Hub.

• Used to charge connected .USB-A Devices

• USB-A Ports support surge and 15KV ESD

(Electrostatic Discharge) Protection.

10-Port Industrial USB 3.0 (5 Gbps) Hub | USB 3.1 Gen 1 to 10x USB-A | ESD & Surge Protection

3

Requirements

For the latest requirements, please visit . www.startech.com/HB30A10AME

• Phillips Head Screwdriver

• Writing Utensil

• Level

• Mounting Screws (x 2)

Installation

Notes: It is recommended to use an external (+7 - 24V DC)DC Power Source

connected to the to ensure sucient power/current is 2-Wire Terminal Block

delivered to each on the . USB-A PortHub

The can also be powered by a HubHost ComputerUSB-B Host connected to the

Port, when using low power consuming USB Devices.

Powering the Hub Using the Universal Power Adapter

1. Connect the to the and to a Universal Power AdapterTerminal Block AC

Electrical Outlet.

2. Connect a (the end will depend on USB Port you are USB-B to USB Cable

connecting to) to the and to a USB port on the .USB-B Host Port Host Computer

3. The should detect the and automatically Host Computer’s Operating SystemHub

install it.

4. Connect your to the (x 10) on the .USB DevicesUSB-A PortsHub

Powering the Hub Using USB

1. Connect a (the end will depend on USB Port you are USB-B to USB Cable

connecting to) to the and to a USB port on the .USB-B Host Port Host Computer

2. The should detect the and automatically Host Computer’s Operating SystemHub

install it.

3. Connect your to the (x 10) on the .USB DevicesUSB-A PortsHub

Powering the Hub Using the 2-Wire Terminal Block

1. Remove the from the .Terminal Block Connector HousingHub’s Casing

2. Using a small screwdriver (Phillips or Flat Head), loosen the screws on the Terminal

Block Connectors.

4

5

2

1

Product specificaties