StarTech.com GNDBAR1U Handleiding

Bekijk gratis de handleiding van StarTech.com GNDBAR1U (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.0 sterren uit 5 reviews. Heb je een vraag over StarTech.com GNDBAR1U of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Instruction manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 05/07/2015

For the latest information, technical specications, and support for

this product, please visit www.startech.com/GNDBAR1U.

Packaging contents

• 1 x copper grounding bar (1U or 10U)

• 12 x M5 (20 mm) screws

• 2 x M5 cage nuts

• 1 x instruction manual

System requirements

• A server rack with 1U of free space (horizontal installation) or 10U

of free space (vertical installation)

System requirements are subject to change. For the latest

requirements, please visit www.startech.com/GNDBAR1U.

GNDBAR1U

Copper grounding bar for server racks

*actual product may vary from photos

Product overview

Install the grounding bar

The grounding bar can be installed either horizontally or vertically,

and can be installed on the inside or the outside of your server rack.

Using the holes located along the length of the grounding bar, you

can connect and ground up to ten devices.

1. Decide whether you want to install the grounding bar horizontally

or vertically, and select the area on your server rack where you

want to install the grounding bar.

2. Insert the included M5 cage nuts in the holes in your server rack

that line up with the mounting holes on the end of the grounding

bar.

3. Line up the mounting holes on the end of the grounding bar with

the holes in which you inserted the cage nuts.

4. Holding the grounding bar in place, insert the included M5 (20

mm) screws into the mounting holes located on each end of the

grounding bar.

5. Use a screwdriver to tighten the screws.

6. Attach the devices that you want to ground to the holes located

along the length of the grounding bar.

Note: If you install the grounding bar vertically and inside of the

server rack, the mounting screws used to hold equipment may need

to be replaced with the provided M5 (20 mm) screws.

Mounting holeGrounding hole

Product specificaties