Star Micronics TSP100IIU+ Handleiding
Star Micronics
Printer
TSP100IIU+
Lees hieronder de 📖 handleiding in het Nederlandse voor Star Micronics TSP100IIU+ (4 pagina's) in de categorie Printer. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
What's Included
If contents are missing or damaged, please contact the reseller that sold you
the printer.
*accessories vary depending on the region where the printer was purchased.
All company and product names are trademarks or registered trademarks of their respective owners. (https://www.star-m.jp/eng/trademarks.html)
For more information please visit our FAQ site at: https://www.starmicronics.com/support/faq.aspx
Download the TSP100 Windows Driver “futurePRNT”.
Extract the futurePRNT software and run “Autorun.
exe”.
Follow the wizard and install the software.
Easy Setup Guide TSP100IIU+
Install it before connecting a USB cable.
Installing the Windows driver
TSP100IIU+ online manual
This document explains the setup procedure for the TSP100IIU+.
For further instructions, please refer to the TSP100IIU+ online
manual.
Please read the instructions before using the printer.
Introduction
Please download the TSP100 futurePRNT Driver by
the following QR code or searching the web site.
Download the TSP100 futurePRNT Driver
The Windows drivers are included in futurePRNT.
When futurePRNT is used, the printer settings
can be configured and an operation test can be
performed.
TSP100IIU+
Paper Roll Guide
USB Cable
Easy Setup Guide
This Sheet
Safety InstructionsPower Cable*
Holder Plate
Rubber Feet Screws(2)Switch Cover
80878770
For customers using Windows Tablet PC・ < What to Do First >
TSP100IIU+ online manual
futurePRNT Driver
©2021 Star Micronics Co., Ltd.
3
Turn ON the Main Unit
Power
Connect the included power cable
to the inlet on the back side of the
TSP100IIU+ . Connect the plug of the
power cable to the outlet .
Turn on the power to the TSP100IIU+ ,
and check the blue LED lights up .
2
Inserting a Paper Roll
When using a paper roll with 58
mm width, install the supplied
paper guide into the printer.
To change the paper width, the
memory switch must be set. Refer
to the online manual for details.
Insert a paper roll in the direction
shown in the illustration.
Pull the end of the paper out
straight , and push down both
sides of the printer cover to close .
This completes printer setup.
On Windows, the device driver software will
be installed automatically. Shortly thereafter,
your device will be ready to use.
34
I
O
FEE D
ERROR
4
3
1
2
2
1
Windows
Android
Using the supplied USB cable, connect it to the port (Type-B) and
secure it with the cable lock . Connect the opposite end to the PC .
Using your USB to Type-B cable, connect it to the USB port (Type-B)
and secure it with the cable lock . Connect the opposite end to your
Android device .
There are various plugs
for Android devices
You will need:
USB cable included with the printer
You will need:
USB cable (sold commercially or one
that comes with a tablet)
A specific USB On-the-Go adapter
may be required for your Android
product, please contact your tablet
manufacturer.
3
3
DK
DK
1
2
DK
DK
1
2
Plug for the printer
(Type-B)
Plug for the printer
(Type-B)
1
Connect a USB cable
Set Up the Printer
Push the cover opening lever
and then open the rear cover .
Product specificaties
Merk: | Star Micronics |
Categorie: | Printer |
Model: | TSP100IIU+ |
Heb je hulp nodig?
Als je hulp nodig hebt met Star Micronics TSP100IIU+ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Printer Star Micronics
7 Juli 2023
19 Juni 2023
16 Juni 2023
15 Juni 2023
15 Juni 2023
12 Juni 2023
6 Juni 2023
6 Juni 2023
5 Juni 2023
4 Juni 2023
Handleiding Printer
- Printer HP
- Printer Sony
- Printer Samsung
- Printer Xiaomi
- Printer Panasonic
- Printer Epson
- Printer LG
- Printer Huawei
- Printer Canon
- Printer Honeywell
- Printer Olympus
- Printer Toshiba
- Printer Xerox
- Printer Brother
- Printer Builder
- Printer Dell
- Printer Digitus
- Printer Dymo
- Printer Frama
- Printer Fujifilm
- Printer Fujitsu
- Printer Ibm
- Printer Intermec
- Printer Kodak
- Printer Konica Minolta
- Printer Kyocera
- Printer Lenovo
- Printer Lexmark
- Printer Minolta
- Printer Mitsubishi
- Printer MSI
- Printer Nec
- Printer Paxar
- Printer Polaroid
- Printer Primera
- Printer Renkforce
- Printer Ricoh
- Printer Roland
- Printer Royal Sovereign
- Printer Sagem
- Printer Seiko
- Printer Sharp
- Printer Star
- Printer Thomson
- Printer Tomy
- Printer Toshiba TEC
- Printer Triumph-Adler
- Printer Velleman
- Printer Zebra
- Printer Oce
- Printer Oki
- Printer Olivetti
- Printer Olympia
- Printer Argox
- Printer DTRONIC
- Printer Metapace
- Printer Citizen
- Printer Nilox
- Printer Approx
- Printer Ultimaker
- Printer Bixolon
- Printer Brady
- Printer GoDEX
- Printer Testo
- Printer EC Line
- Printer Pantum
- Printer DNP
- Printer TSC
- Printer Equip
- Printer StarTech.com
- Printer Fichero
- Printer GG Image
- Printer Posiflex
- Printer ZKTeco
- Printer Datamax-O'neil
- Printer Panduit
- Printer Dascom
- Printer HiTi
- Printer Vupoint Solutions
- Printer Elite Screens
- Printer Phoenix Contact
- Printer Colop
- Printer Raspberry Pi
- Printer Evolis
- Printer IDP
- Printer Fargo
- Printer Microboards
Nieuwste handleidingen voor Printer
26 April 2024
26 April 2024
26 April 2024
17 April 2024
17 April 2024
9 April 2024
9 April 2024
8 April 2024
8 April 2024
5 April 2024