SPC Office Pro Handleiding

SPC Telefoon Office Pro

Lees hieronder de 📖 handleiding in het Nederlandse voor SPC Office Pro (2 pagina's) in de categorie Telefoon. Deze handleiding was nuttig voor 109 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
1. Pick up the handset and press the key.RLL
2. When you are finished, place the handset back in its
holder.
1. With the handset on-hook, press the key
2. Press repeatedly
,to scroll through the list.
3. Press to exit.MENU
1. With the handset on-hook, press the key
.
2. Press repeatedly
3. Pick up the handset to make the call.
OFFICE PRO
Product reference 3604N
USER MANUAL
18.Alphanumeric keypad.
19.VOL key: Decrease volume of handsfree / select menu
options.
20.Key : List of received calls. Last old / Rest.
21.Key : List of received calls. Recent old / total.
22. VOL+ key : Increase handsfree volume / select menu options.
23.MENU key: access the menu options.
24.Key
:
Calculator function.
25.Key : Save to memory.
26.Key : List of outgoing calls / multiplication.
27.Key : .Delete.
28.Input for the handset cable.
29.CONNECTION: Input for flat ribbon cable.
30.
EXT:Input for connecting another telephone.
31.Input for the handset cable.
32.Table stand.
33.Battery compartment.
10.Key
:Alarm clock.
11.PAUSE key.
12.Key
: Silent. Mute microphone.
13.RING TONE key: Set melody and ring tone
volume.
14.BRIGHTNESS key: Adjust the screen contrast.
15.R/÷ key: Access the services of your telephone company /
department.
16. key: Repeat the last number you dialed.RLL
17.Key
: Handsfree.
In the package of your phone you should find the
following components:
1 .Telephone
1 .Handset cable
1 .Telephone cable
User manual.
SAT List.
Table:
1. Öffnen Sie das Batteriefach (33), indem Sie die Lasche nach
hinten ziehen und dann die Abdeckung anheben. Legen Sie 3
Alkalibatterien der Größe AA (1,5 V) in das Batteriefach ein.
2. Connect one end of the handset cable to the connector on
the bottom of the phone (28) and the other end to the
connector on the side of the base (31).
3. Connect one end of the flat telephone cable to the front of the
telephone (29) and the other end to the telephone jack. Make
sure that you hear a tone when you lift the handset.
1. With the handset on-hook, press the key.MENU
2. Press the key until " " appears.SEt 3 LCd
3. Press the key to confirm.MENU
4. Press the
keys to select the desired contrast.
5. Press the key to confirm.MENU
6.Press the key to return to the home screen.
PAUSE
1. Remove the table plate piece (32). To do this, pull the tabs
back and then lift the piece off.
2. Pull the piece out and rotate it 180° to the wall position
3. Drill holes 96 mm apart in the wall as shown in the
illustration:
4. Attach the screws. Insert the base into the screw
sockets for wall mounting and make sure that it is firmly
seated.
1. With the handset on-hook, press the key.MENU
2. Press the key,until " " appears.Set 4 FLASH
3. Press the key to confirm.MENU
4. Press the
keys to select the desired time in
5.Press the key to confirm.MENU
1. Pick up the handset. The " " indicator lamp lights up.In use
2. Start the conversation.
3. When you are finished, place the handset back in
its holder.
1. Pick up the handset. The " indicator lamp lights up."In use
2. Wait for the dial tone and dial the desired number.
3. When you are finished, place the handset back in its
holder.
1. With the handset on-hook, press the key.MENU
2. The screen will display
"SEt
1
dAtE". This means (DATE /
TIME).
3. Press the MENU key. The year starts to flash.
keys you can increase or decrease the year.
4. The month starts flashing. With the keys
5. The day starts flashing. With the keys
-There are 5 ring levels and a "do not disturb" function where
the ringtone is turned off.
-There are 9 different ringtones melodies.
1. With the handset on-hook, press the key.RINGTONE
2. The screen displays " " and the current melody is ring 01 db5
played. Press the key repeatedly to change the RINGTONE
melody. From " " to " ".ring 01 ring 09
3. Press the key to confirm.MENU
1. With the handset on-hook, press the key.RINGTONE
2. The screen will display "ring 01 db5" and playback of the
3. Press the key to confirm.MENU
1. With the handset on-hook, dial the number you want to call. Use
the key to delete digits if you make a mistake.
2. Pick up the handset. The " " indicator lights up and the In use
phone dials the number.
3. When you are done, place the phone back into the holder.
1.Press
2. Dial the desired number. When the other person answers,
speak into the phone.
3. When you are finished, press
.
6. The hour starts flashing. With the keys
7. The minutes start flashing. With the keys
8. Press the key to return to the home screen.
2 3
5
9
13
6
10
14
7
11
15
8
12
16
4
SPC. 14/05/1h
1. Screen
2. Indicator for picked up phone or in operation.
3. : M1 key Direct memory.
4. : M2 key Direct memory.
5. : M3 key Direct memory.
6. : M4 key Direct memory.
7. : M5 key Direct memory.
8. : M6 key Direct memory.
9. : M7 key Direct memory.
INSTALLATION
INSTALLATION
On the wall:
increase or decrease the mon .th
Press the MENU key.
"CodE 2" or in the menu "SEt 2 CodE"is a function that should not
be used in Spain, otherwise there may be problems when dialing.
key, um die to exit the function and return to
milliseconds..
.The screen displays " ".mutE
again to be heard.,
FEATURES
INCOMING CALLS
The " " indicator lamp lights upIn use .
POSITION OF THE CONTROLS
POSITION OF THE CONTROLS
POSITION OF THE CONTROLS
POSITION OF THE CONTROLSPOSITION OF THE CONTROLS
PACKAGE CONTENTS
The tab must face outward so that you can hold the phone.
CONFIGURATION
Once the device is connected to the phone line, it is ready to make
and receive calls. If you want, you can set the volume and ringtone
melody , date and time, R key time, contrast...
DATE AND TIME
This phone automatically updates the date and time when it
receives the first call with the identification of the calling phone
number. Therefore, it is not necessary for the user to take action.
To do this, you must have activated the caller identification service
with your phone company (Movistar, Jazztel, Ono, Euskaltel, etc.).
However, in any case, you will need to update the year so that the
day of the week in the calendar is the correct one. If you want to do
this manually, follow the steps below:
With the
Press the MENU key.
you can
you can
increase or decrease the day. Press the key.MENU
you can
increase or decrease the hour. Press the key.MENU
you can increase or decrease the minutes. Press the key.MENU
NOTE: When you look at the calendar on the screen, the first
column, starting from the left, shows Sunday (S - Sunday). On the
right side of the screen you will see the seven days of the week
flashing on the day you are currently on (SUN-SUNDAY; MON-
MONDAY; TUE-TUESDAY; WED-WEDNESDAY; THU-THURSDAY;
FRI-FRIDAY; SAT-SATURDAY).
PREFIX
Press the
the home screen.
CONTRAST SETTING
You can adjust the contrast of the screen on the device. You can
choose from 16 levels. Follow the steps below to change the
contrast:
From "LCd 00" low contrast to "LCd 15" high contrast.
The quickest way to change the contrast is to press the
BRIGHTNESS key repeatedly until the desired contrast is
selected.
NOTE: When the batteries are low, you can increase the contrast
on the screen to ensure good visibility.
R Key
This key allows you to access the various services offered by
your telephone company or switchboard, such as: "call
forwarding", "call waiting", " answering machine", etc. To do this,
press the R key and the corresponding code.
The duration of the R (FLASH) time can be changed via the
menu. For Spain it should be 100ms. If you configure your
phone with an R time that does not correspond to your country,
you will not be able to use some of the services offered by your
telephone company.
VOLUME CONTROL AND RINGTONES
Set melody:
Adjust volume:
current melody will begin. With the keys you can
increase or decrease the ringtone volume. From "db1" to "db5".
NOTE: To turn off the ringtone, select "ring oFF" when selecting
the ring melody. The message will be displayed on the screen to
remind you that the ringtone is off.
SETTING THE VOLUME OF THE HANDS-FREE
SYSTEM
Press the button to increase the volume or the VOL- VOL+
button to decrease the volume during hands-free calling.
MUSIC ON HOLD
When you have picked up the handset, press the RINGTONE
button to put music on hold. Press the button RINGTONE
again to resume the call.
MUTE
If you do NOT want to be heard by your call partner,
press the key
Press the same key
CALL TIME COUNTER
This terminal has a time counter that starts automatically about
5 seconds after dialing. This gives you an approximate idea of
the duration of the call.
During dialing numbers, you can enter a pause of 3.6 seconds by
pressing the key. This function can be useful for calls to PAUSE
foreign countries by inserting the pause after the country code.
KEY TONE
With the handset on-hook, press and hold the key for 4
seconds to activate or deactivate the key tone.
The ringtone plays when a call comes in.
HOW TO MAKE A CALL
To call another user of the telephone service, perform the
following operations:
DIALING WITH THE HANDSET ON-HOOK
HANDS-FREE CALLING
You can have a conversation without holding the handset to
your ear.
to take over a line.
NOTE: In hands-free mode, the call partners should not
speak at the same time.
REPEAT THE LAST DIALED NUMBER
If you want to call the last dialed number again.
SUMMARY OF THE LAST 18 NUMBERS DIALED
On the screen you will see the number, the call time and the
position in the list.
MAKE A CALL TO ONE OF THE 18 LAST DIALED
NUMBERS
to select the number you
want to dial.
1. Press the key.
2. Press the key to check the stored numbers in
3. When the icon disappears, you have already checked NEW
all new calls.
1. With the handset on-hook, press the key
2. Press
3. Press
1
DELETE ALL NUMBERS FROM THE LIST
.With the handset on-hook, press the key
the list.
2. Press and hold the
1. Press
2. Press .
1. Prss
.
2. Press and hold the key for 3 seconds.
- NEW : New call
- REPEAT : Repeated call
- IN : List of incoming calls
- --P-- : Private conversation
- --U-- : Call outside the area
- OUT : List of calls made
1. Press until you reach the number you want to dial.
2. As soon as it appears on the screen, just lift the handset and the
device will automatically start dialing the number.
1. With the handset on-hook, dial the number you want to
save.
2. Press ," " appears on the screen.StorE
3. Press one of the memory keys (M1- M7) on which it is to
be stored.
, press M1.
1. With the handset on-hook, press the key . "12-00 AL1"
2. Press to activate or deactivate the alarm. When this function
is activated, the "ALM" icon is displayed at the top of the screen.
3. Press the key, the screen will display the time MENU
flashing.
4. Enter the time with the keys ein und drücken Sie zur
Bestätigung die -Taste.MENÜ
5. Geben Sie die Minuten mit den Tasten
6. You can continue data entry to set the following alarms,
or press to exit.
-Check connections and of the headphone cable.28 31
-Check the telephone connection between the device and 29
the telephone line in your house.
-Remove the batteries. Disconnect the phone from the line
for a few minutes.
-Check the selected ringtone volume.
Option 1:
1. Lift the handset to take over the line.
2. Press the M1 key. The phone dials into the line automatically.
Option
2:
1. Press the M1 key. The phone switches to hands-free
mode and dials automatically.
PABX CODE
-From the list of received calls: The phone first dials the PABX
code, pauses for 2 seconds, and then dials the selected
number from the received calls list.
-From the list of dialed calls: If the first digit of the phone
number matches the digit of the PABX code, the phone dials
the first digit of the number followed by a 2-second pause.
1. With the handset on-hook, press and hold the key
2. Use the
-Make sure you have a caller ID contract with your phone
company.
-It may be that you have ordered the service and the caller
has deactivated his identification.
-Make sure that you have connected an ADSL filter directly
to each outlet used in the house.
-Make sure that the modem and the phone are plugged into
the correct filter slot (a separate one for each).
-The filter(s) may be defective. Replace the filter(s) and test
again.
1. With the handset on-hook, press and hold the
key until "P" is displayed on the screen.
2.Press the key.MENU
1. With the handset on-hook, press and hold the key
1. With the handset on-hook, press and hold the key
1. With the handset on-hook, press the key
.
2. Use the icons displayed on the screen to perform the
operations.
( )summate
( )subtract
RKey /÷ ( )Divide
( )Multiplication
( )Result
( )Decimals
(set to 0 )
3. To exit the calculator mode, press the key.MENU
1. With the handset on-hook, press and hold the MENU key until
the screen displays "EL --".
2. Use the keyboard to select "
and 1"and press the
Menu key.This gives the device a name.
3. Perform the same steps with the second device and
and
2".
KONFORMITÄTSERKLÄRUNG/DECLARATION OF CONFORMITY
DECLARAÇAO DE CONFORMIDADE
ANMELDER/DECLARANT/DECLARANTE
Name/Name/Nome: SMART PRODUCTS CONNECTION S.A.
Adresse/Address/Endereço: Parque Tecnológico Álava
C/ Leonardo da Vinci, 14. (01510) Miñano (Álava)
Tel: Fax: (+34) 945 297 029 (+34) 945 297 028
CIF: A-01042878
GERÄT/DEVICE/EQUIPAMENTO
Geräteklasse/Device type/Tipo de equipamento: Schnurgebundenes Telefon
Hersteller/Manufacturer/Fabricante: Smart Products Connection S.A.
Herstellungsland/Manufacturing country/País de fabricação: China
Marke/Brand/Marca: SPC
Handelsbezeichnung/Commercial Name/Nome comercial: 3604N
ANWENDBARE NORMEN/APPLICABLE NORMS/NORMAS APLICÁVEIS
EN 60950-1: 2006 + A11:2009
EN 55022: 2006 + A1
EN 55024: 1998 + A1:2001 + A2:2003
FUNKTIONEN/FEATURES/CARACTERÍSTICAS
Vollständige Funktionen im Benutzerhandbuch beschrieben/Full features detailed in the
user manual/Características completas e em detalhe no manual do usuário.
Miñano, 20. Juli 2011
D. José María Acha-Orbea
Geschäftsführer/General Manager/Diretor-geral
Diese Konformitätserklärung entspricht der europäischen Richtlinie 1999/05/EG.
This declaration of conformity is in compliance with the European Directive
1999/05/EC. Esta declaração de conformidade respeita as normas da Diretiva
Europeia 1999/05/EC.
1817 19
21
25
29
22
26
30
23
27
31
24
28
32
20
list.
SELECT FROM MEMORY
There are two options:
and
2" ( this must happen within the
TECHNICAL DATA
DELETE NUMBERS FROM THE LIST OF DIALED
NUMBERS
to access the
repeatedly to select the number
you want to delete.
to delete it.
to access
key for 3 seconds.
CHECK RECEIVED CALLS
You can find out who is calling you or who has called you in your
absence. To do this, you must ask your telephone company (
Movistar, Jazztel, Ono, Euskaltel, etc.) to activate this service.
When the service is set up on your line, the caller's number will be
displayed on the screen. Your phone will register 99 incoming
calls.
CHECK RECEIVED CALLS
The icon on the screen together with the last received NEW
number indicates that you have new calls to check. As long as you
have not checked all new calls , the icon will not disappear . The
phone stores received calls until they are deleted. You can store up
to 99 calls. To check the list of received calls:
At the top of the screen you will see
the month, the day, the time the call was received and the
position in the list. The NEW icon is displayed at the bottom left
and the received number at the bottom.
chronological order.
Other information:
DIALING FROM THE LIST OF RECEIVED CALLS
To dial a number stored in the list of received calls:
DELETE A NUMBER FROM THE LIST OF RECEIVED CALLS
until you get to the number you want to delete.
DELETE ALL NUMBERS FROM THE LIST
INDICATOR FOR RECEIVED MESSAGES
If you have a contract with your phone company and have
activated their voicemail, the icon will appear on the left side MAIL
of the screen when someone calls you and leaves a message in
your voicemail. Once you have cleared all voicemail messages,
you will receive a signal from your phone company with no
associated number and the icon will disappear. MAIL
In some areas or on some lines, this feature may not work
properly.
The icon also disappears automatically when the handset is
picked up.
DIRECT MEMORY M1, M2, M3, M
4, M5, M6 AND M7
This phone allows you to store 7 speed dial numbers. We
recommend that you write down the numbers you use most
often. Each memory can store up to 16-digit numbers.
SAVE A PHONE NUMBER
Example: Dial 945297028, press
NOTE: The stored data will be lost if the phone is without
batteries and is not connected to the power supply for several
minutes.
DIAL MODE
This telephone comes from the factory configured to dial in touch
-tone mode. Most telephone exchanges use this type of telephone
dialing. If for some reason you need to switch to pulse mode,
proceed as indicated.
To return to touch-tone mode, press and hold the key
until "1" appears on the screen.
CALCULATOR
You can use your phone as a calculator. To activate the
function:
Key
Key
Key
Key
Key
Key
ALARM CLOCK WITH 5 ALARMS
The phone offers the possibility to program 5 different
alarms. To do this, you need to do the following:
appears on the screen.
NOTE: The first three alarms are regular alarms AL1, AL 2 and AL3,
they sound every day. The last two alarms AL4 and AL5 are triggered
only once. The alarm duration is approximately 55 seconds. To stop
the alarm, press any key.
and press the
MENU button to confirm.
SPECIFIC FUNCTIONS
When you enable the PABX function:
until "Set PcodE" appears on the screen.
keys to select the code and press the
MENU key to confirm.
WARNING FUNCTION FOR SIMULTANEOUS DIALING
If you dial from another phone connected on the same line,
that phone will beep, preventing the dialing process from
being completed.
To activate this function:
until "SPI on" appears on the screen. Press the MENU
key.
To disable this function:
until "SPI off" appears on the screen. Press the MENU
key.
PARALLEL TRANSMISSION
If you have another device like this, you can transfer a call to it
as follows:
First of all, each phone must be given a name.
name it "
If you receive a call with the first device and want to switch to the
second device. Press "
first 30 seconds). The other device starts to ring. Pick up the
handset to answer. Hang up the handset of the first device or talk
to all three in the conference.
TROUBLESHOOTING
When the handset is picked up, no sound is heard and the
red "in use" indicator lights up
When you pick up the handset, no sound is heard and the "In
use" indicator does not light up
Strange icons appear on the screen and the phone does
not respond
The ringtone is too quiet
The number of the caller is not displayed
Connected ADSL has no caller ID or poor sound quality
Return loss > 14 dB.
Multi-frequency dialing presets: CCITT Z.23.
Transmission time: > 90 ms.
Pause time: > 100 ms.
Timed opening time: 100ms.
Pause time during dialing: 3.6 s.
Maximum number of numbers per memory: 16.
Number of call records: 99.
Compatible with Spanish analog phone lines.

Product specificaties

Merk: SPC
Categorie: Telefoon
Model: Office Pro

Heb je hulp nodig?

Als je hulp nodig hebt met SPC Office Pro stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Telefoon SPC

SPC

SPC Comfort Numbers 2 Handleiding

14 Juni 2023
SPC

SPC Office Pro Handleiding

3 Juni 2023
SPC

SPC Comfort Kaiser 7608N Handleiding

31 Mei 2023
SPC

SPC Gossip 2 Handleiding

16 Mei 2023
SPC

SPC Keops Handleiding

14 Mei 2023

Handleiding Telefoon

Nieuwste handleidingen voor Telefoon

Samsung

Samsung SGH-E490 Handleiding

16 April 2024
Gamdias

Gamdias Pheme M1 Handleiding

16 April 2024
Tador

Tador KX-T927-MT Handleiding

13 April 2024
Essentiel B

Essentiel B Nivalis 15.1 Handleiding

9 April 2024
Essentiel B

Essentiel B Nivalis 15.2 Handleiding

9 April 2024
Geemarc

Geemarc PhotoPHONE 110 Handleiding

9 April 2024
Lindy

Lindy 42980 Handleiding

9 April 2024
Geemarc

Geemarc SOS-PRO 595 Handleiding

9 April 2024
Geemarc

Geemarc ClearSound CL60 Handleiding

8 April 2024
Geemarc

Geemarc DALLAS10 Handleiding

8 April 2024