SoundTube SD-1-T Handleiding

Bekijk gratis de handleiding van SoundTube SD-1-T (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.5 sterren uit 9 reviews. Heb je een vraag over SoundTube SD-1-T of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Type

Construction

Dimensions

Weight

SolidDrive SD1-T In-Wall and In-Ceiling

(Required for Drywall Mounting) Mounting Bracket Specifications

NOTEin: Wen inhstalled Canada, tct mst be in aith this produunstalled iccordance whe

Canadian Electrical Code, C22.2, No. 205-17

Type

Frequency Response (Hz)

SD1-T & SD1sm-T Dimensions

SD1g-T Dimensions

Weight

UL Listing

Full Range Transducer

70 Hz to 15 kHz

10 W

2.3'' Diameter x 4.8'' Height

Mounting Foot 3.5'' Diameter

2.3'' Diameter x 4.8'' Height

Mounting Foot 2.0'' Diameter

1.5 lb / .68 kg

1480A & 2043

Patented balanced cantilever spring bracket

Heavy duty, galvanized steel

12OC – 2.0'' H x 13.5'' W x 5.0'' D

16OC – 2.0'' H x 17.5'' W x 5.0'' D

24OC – 2.0'' H x 25.5'' W x 5.0'' D

1.0 lb / .45 kg

INSTALLATION & USE GUIDE

for SD1-T, SD1sm-T & SD1g-T

INSTALLATION OF SOLIDDRIVE SD1-T INTO WALLS AND CEILINGS

GETTING STARTED WITH SOLIDDRIVE

What’s included with the SolidDrive SD1-T for installation into walls and ceilings and

what is supplied by the installer:

A SolidDrive SD1-T consists of: One (1) SolidDrive SD1-T unit with included 10 W

transformer, supplied with 4 hard wire leads and one duplex conduit connector. *Additonal

mounting materials may need to be ordered with the SolidDrive SD1-T or supplied by the

installer depending on the application.

For drywall: For in-wall and in-ceiling installation, you will have ordered one (1) or more

SolidDrive SD1-T’s and one (1) or more patented acoustic in-wall mounting brackets (one

(1)bracket per SD1-T), which comes with four (4) #8-32 x 5/16” Phillips flat head machine

screws for mounting the drive to the bracket. At the time of the order, you will also have

specified mounting bracket(s) in widths of 12” OC, 16” OC, or 24” OC (On Center of wall

studs/ceiling joists) for proper width. *Installation also requires four (4) 1 3/8” drywall

screws and one (1) container of 3M

®

Super 77 Spray Adhesive (supplied by the installer).

EXISTING DRYWALL INSTALLATION NOTE:

For retrofitting the SolidDrive SD1-T into existing drywall installations, it will be necessary

to remove a portion of the existing drywall before installation and to replace the drywall

after the SolidDrive SD1-T is installed. Please refer to the instructions marked with

EXISTING DRYWALL for the steps necessary for the type of installation. If installing the

SolidDrive SD1-T in new construction, IGNORE the EXISTING DRYWALL steps.

Experience Audio Perfection

Induction Dynamics extensive line of audio products makes

it easy to create the ultimate audio system, regardless of

installation requirements. Induction Dynamics builds these

products with only the most select components and materials;

and utilizes numerous unique and proven technologies.

By utilizing these basic installation steps, you can install the SolidDrive SD1-T into walls

and ceilings to create a completely hidden audio system.

STEP 1

INSTALLATION INTO EXISTING DRYWALL

For installation the SolidDrive SD1-T mounting bracket into existing drywall, first cut a

rectangular opening in the drywall. The minimum recommended opening size is

approximately fifteen inches tall and beyond the width of the adjacent wall studs. This will

help in attaching the mouting bracket, feathering the drywall back in, and getting the

drywall to meet at the seams (Figure 1). This will allow proper distribution of sound and the

SolidDrive SD1-T will function with optimum performance.

Figure 1

Cut an opening

large enough

to install the

mounting bracket

to the wall studs

SolidDrive SD1-T|, SD1g-T, SD1sm-T Specifications

Recommended Amplifier Power

WARRANTY

SolidDrive products are guaranteed for 7 years from date of purchase. Any misuse or

modifications to this equipment in any way will void the warranty.

WARNING

Read instructions prior to operating. To reduce the risk of fire or electric shock, do not

expose this product to rain or moisture. Unplug prior to cleaning and clean with a damp

cloth. There are no user-serviceable parts in this product, please refer all servicing to

qualified personnel.

218-2127-T REV-03/25/20

SoundTube Entertainment / 13720 W 109th St / Lenexa, KS 66215 / 855.663.5600 / 913.663.5600 / www.soundtube.com

STEP 2

Attach the SolidDrive mouting bracket to wall studs or ceiling joists

Place the mounting bracket between the wall studs or ceiling joists and secure with four

1 3/8” drywall screws. Insert the screws through the four pre-drilled holes in each flange

and screw them into the face of each wall stud or ceiling joist (Figure 2). The drywall

screws need to be driven flush with the surface of the flange so that the drywall sets flush

on the bracket flange.

Product specificaties