Smanos VD8000 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Smanos VD8000 (15 pagina's) in de categorie Beveiliging. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15
© 2015 SMANOS HOLDING LTD. All Rights Reserved.
Printed in China
Ver: VD8000-UM-ML-V1.0
VD8000
Wireless Vibration
Detector
MULTILINGUAL
USER MANUAL
EN DE ESFR PTNL IT
EN EN
Introduction
The wireless vibration detector adopts the theory of vibration,
touch and motion mode. Once it detects any vibration, it will
automatically send wireless signal to the control panel for alarm. It
is widely used for objects with a solid or thick structure, like safe and
so on. Its vibrating sensitivity can be adjusted in three levels thus
it can prevent false alarm effectively. Two pieces of AAA 1.5V LR03
batteries are included in the detector, which enables 12 months
standby.
Product Overview
LED indicator
LED Indication
Flash once: Vibration detected, sending wireless signal to the control
panel.
Flash once every 2 seconds: Low battery. Please replace the battery
immediately.
PCB Layout
Antenna
Sensitivity setting
Mode setting
Tamper switch
Sensitivity Setting
Take off the back case with screwdriver, and put the black jumper
cap onto the jumper of required sensitivity level.
EN EN
High sensitivity Medium Sensitivity Low sensitivity
Connecting to the Control Panel
Please connect the detector with control panel before use:
1. Make sure the control panel is under pairing state (please refer to
the relative user manual).
2. Knock once on the surface of the detector to simulate an alarm (LED
ashes once), when a beep is heard from control panel, it means
the pairing is successful.
Installation
1. Remove the insulating strip; the detector will enter working state.
2. Clean the surface of object to be installed.
3. Fix the detector on the middle of the object’s surface with double-
sided adhesive tape and make sure the antenna is upward.
Note: Whether a vibration signal will be detected depends on not only the knocking
strength on objects, but also the strength, frequency and duration of the signal.
Specications
Power Supply: DC 3 V (AAA 1.5 V LR03 x 2 PCS)
Static Current: < 29 uA
Alarm Current: < 22.2 mA
Transmitting Distance: < 80 m (in open area)
Radio Frequency: 868 MHz
Housing Material: ABS plastic
Operation Condition:
Temperature: 0°C ~ +55°C
Relative Humidity: < 80% (non-condensing)
Detector Dimensions (L x W x H): 54 X 14.5 X 107 mm


Product specificaties

Merk: Smanos
Categorie: Beveiliging
Model: VD8000

Heb je hulp nodig?

Als je hulp nodig hebt met Smanos VD8000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Beveiliging Smanos

Smanos

Smanos FD2000 Handleiding

26 September 2023
Smanos

Smanos SR1000 Handleiding

26 September 2023
Smanos

Smanos DS8600 Handleiding

26 September 2023
Smanos

Smanos Q300 Handleiding

26 September 2023
Smanos

Smanos VD8000 Handleiding

26 September 2023
Smanos

Smanos PR2600 Handleiding

26 September 2023
Smanos

Smanos FD2100 Handleiding

26 September 2023
Smanos

Smanos GB1260 Handleiding

26 September 2023
Smanos

Smanos MD8000 Handleiding

26 September 2023
Smanos

Smanos SMK-500 Handleiding

26 September 2023

Handleiding Beveiliging

Nieuwste handleidingen voor Beveiliging