Smanos FD2100 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Smanos FD2100 (15 pagina's) in de categorie Beveiliging. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15
© 2015 SMANOS HOLDING LTD. All Rights Reserved.
Printed in China
Ver: FD2100-UM-ML-V1.0
FD2100
Wireless Water Detector
MULTILINGUAL
USER MANUAL
EN DE ESFR PTNL IT
EN EN
Introduction
This is a contact wireless water detector, which works based on the
theory of liquid conductivity. The performance is reliable and the
installation is easy. When the liquid reaches to the two probes of the
detector, it will send wireless signal to the control panel. It can be
widely used in computer rooms, warehouses and any places need
to be protected from water. Two pieces of AAA 1.5V LR03 batteries
are included in the detector, which enables 12 months standby.
Product Overview
LED Indicator
Transmitter
Probe
LED Indication
Flash once: Liquid is detected, sending wireless signal to the control
panel.
Flash once every two seconds: Low battery. Please replace the
battery immediately.
PCB Layout
AAA 1.5V LR03
AAA 1.5V LR03
Tamper Switch
Connect to the Control Panel
Make sure the control panel is under learning status, then simulate
an alarm case by touching the probe of detector with the water.
When an alarm signal is received by panel, one beep is heard,
indicating a successful connection.
EN EN
Installation
1. Remove the insulated strip, the detector will enter working mode.
2. Use screw to x the probe horizontally on the detection site.
3. Use double-sided adhesive tape to x the transmitter on the place
where the liquid is normally unable to reach, and keep the antenna
upward.
Change Batteries
Open the back case with screwdriver, and replace the batteries with
new ones according to the positive and negative marks.
Specications
Power supply: DC 3 V (AAA 1.5 V LR03 x 2 PCS)
Static current: < 29 uA
Alarm current: < 23 mA
Transmitting distance: < 80 m (in open area)
Radio frequency: 868 MHz
Housing material: ABS plastic
Operating condition:
Temperature: 0 °C ~ +55 °C
Relative humidity: < 80% (non-condensing)
Detector dimensions (L x W x H): 54 x 14.5 x 107 mm
Probe dimensions (L x W x H): 35 x 30 x 15 mm


Product specificaties

Merk: Smanos
Categorie: Beveiliging
Model: FD2100

Heb je hulp nodig?

Als je hulp nodig hebt met Smanos FD2100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Beveiliging Smanos

Smanos

Smanos FD2000 Handleiding

26 September 2023
Smanos

Smanos SR1000 Handleiding

26 September 2023
Smanos

Smanos DS8600 Handleiding

26 September 2023
Smanos

Smanos Q300 Handleiding

26 September 2023
Smanos

Smanos VD8000 Handleiding

26 September 2023
Smanos

Smanos PR2600 Handleiding

26 September 2023
Smanos

Smanos FD2100 Handleiding

26 September 2023
Smanos

Smanos GB1260 Handleiding

26 September 2023
Smanos

Smanos MD8000 Handleiding

26 September 2023
Smanos

Smanos SMK-500 Handleiding

26 September 2023

Handleiding Beveiliging

Nieuwste handleidingen voor Beveiliging