Skytec STX-95 Handleiding

Skytec DJ Gear STX-95

Lees hieronder de 📖 handleiding in het Nederlandse voor Skytec STX-95 (22 pagina's) in de categorie DJ Gear. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/22
172.806
DUAL CD/USB/MP3/SD PLAYER WITH MIXER
USER`S MANUAL
HANDLEIDING
GEBRAUCHSANLEITUNG
2
PROFESSIONAL DUAL CD PLAYER WITH USB AND SD CARD
USER MANUAL
TOP VIEW
IMPORTANT
Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CD player function:
1. EJECT BUTTON
Press to load or eject disk. Each press will open or close the disk tray.
NOTE: Disc holder will not open unless stop or pause button has been pushed first.
2. TIME BUTTON
Use this knob to choose the time mode: elapsed time, remaining time or total remaining time.
3. SINGLE BUTTON
Press this button to switch between the SINGLE and CONTINUOUS play mode. The selected
mode is indicated on the LCD. In SINGLE mode, after each track, the unit stops the reading. In
CONTINUOUS mode, the unit reads all tracks and stops.
4. REPEAT BUTTON
Use this button to repeat one track or all the track of the CD.
3
5. PROG BUTTON
In STOP mode, you can program several tracks ( 20 tracks max ) :
- Press the STOP button to enter in the stop mode
- Press the PROG button to enter in the program mode
- Use the skip track buttons to choose the track you want to listen then press the PROG button to
enter your choice
- Use one more time the skip track buttons to choose the track you want to listen then press the
PROG button to enter your choice
- Repeat the operation to select all the track you want to listen
- Press the PLAY/PAUSE button to start the playback
6. FOLDER BUTTON
Allows you to navigate through folders similarly in either USB or CD mode.
7. SEARCH BUTTON
You may forward and backward to navigation through one track.
8. TRACK SEARCH AND BUTTON
To select the previous track and select the next track.
9. DSP/BRAKE
In play mode, push the brake button at first, and then push play/pause button, the operation
changes is slowness from play to pause, push play/pause button again to cancel this feature.
10. DSP/REVERSE
Push the reverse button to play your track in reverse, push the reverse button again to cancel
this feature.
11. TRACK SELECT BUTTONS
Press the button to switch the function of jog dial to SEARCH and PITCH BEND and
SCRATCH mode,when the indicator LED is off,dial the jog for pitch bend function.If the jog is
unmoved for 8 seconds,the indicator is off and the jog is for pitch bend function.When the
indicator LED is light ,rotary the jog wheel you can enter the scratch mode,while the indicator
LED is flash,dial the jog for quick search forward and backward.
12. JOG & SHUTTLE WHEELS
Shuttle: Use the dial to select the scanning direction and speed. The disc is scanned in the
forward direction when the shuttle dial is turned clockwise from the neutral position, in the
reverse direction when the shuttle dial is turned counterclockwise. The scanning speeds up
when the shuttle dial is turned faster.
Jog: In pause mode, if you turn the jog, the point at which the sound is being produced moves
by a number of frames corresponding to the number of clicks. Clockwise moves the point
forward; counterclockwise moves the point backward. In play mode, the jog increases or
decreases the speed of the song. (Clockwise: increase, counterclockwise: decrease).
13. CUE BUTTON
Pressing the CUE button during play provides a return to the position at which play was started.
14. PLAY / PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to pause or
from pause to play.


Product specificaties

Merk: Skytec
Categorie: DJ Gear
Model: STX-95

Heb je hulp nodig?

Als je hulp nodig hebt met Skytec STX-95 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding DJ Gear Skytec

Handleiding DJ Gear

Nieuwste handleidingen voor DJ Gear