Skytec STX-120 Handleiding

Skytec DJ Gear STX-120

Lees hieronder de 📖 handleiding in het Nederlandse voor Skytec STX-120 (23 pagina's) in de categorie DJ Gear. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/23
PROFESSIONAL DUAL CD/USB/SD
MIXING CONSOLE
USER’S MANUAL
HANDLEIDING
GEBRAUCHSANLEITUNG
2
TOP VIEW
IMPORTANT
Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CD player Function:
1. JOG & SHUTTLE WHEELS
Shuttle: Use the dial to select the scanning direction and speed. The disc is scanned in the
forward direction when the shuttle dial is turned clockwise from the neutral position, in the reverse
direction when the shuttle dial is turned counterclockwise. The scanning speeds up when the
shuttle dial is turned faster.
Jog: In pause mode, if you turn the jog, the point at which the sound is being produced moves by
a number of frames corresponding to the number of clicks. Clockwise moves the point forward;
counterclockwise moves the point backward. In play mode, the jog increases or decreases the
speed of the song. (Clockwise: increase, counterclockwise: decrease).
2. PLAY/PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from
pause to play.
3. CUE BUTTON
Pressing the CUE button during play provides a return to the position at which play was started.
4. PITCH CONTROL
Use this fader to increase or decrease the speed of the track.
3
4. DISPLAY
LCD Display lndicate the Track/Numbers/Time/Remain/Pitch/Continue/Single.
5. IN BUTTON ( LOOP SYSTEM )
This button sets the beginning of the loop. The Loop indicator on the display flashes.
6. OUT BUTTON ( LOOP BUTTON )
When you press this button, you set the end point of the seamless loop and you start the loop. To
finish the loop, press again this button.
7. RELOOP BUTTON ( LOOP SYSTEM )
This button is used to start the last saved loop. To finish the loop, press the reloop button.
8. CONT. / SINGLE BUTTON
Press these to switch between the SINGLE and CONTINUOUS play mode. The selected mode is
indicated on the LCD. In SINGLE mode, after each track, the unit stops the reading. In
CONTINUOUS mode, the unit read all track and stops.
9. REPEAT BUTTON
Use this button to repeat one track or all the track of the CD.
10. TIME BUTTON
Used this knob to choose the time mode : Elapsed time, remaining time or total remaining time.
11. OPEN/CLOSE BUTTON
Press to load or eject disk. Each press will open or close the disk tray.
NOTE: disc holder will not open unless stop or pause button has been pushed fir.
12. TRACK SELECT BUTTONS
Pressing 0-9 buttons, allow you to select tracks from the CD.
13. CD/USB/SD BUTTON
Press this button to choose CD or USB or SD mode while USB connect and the CDs in the tray
and the SD CARD insert the main unit.
14. PROG BUTTON
In STOP mode, you can program several tracks (20 tracks max.):
- Press the STOP button to enter in the stop mode
- Press the PROG button to enter in the program mode
- Use the skip track buttons to choose the track you want to listen then press the PROG button to
enter your choice.
- Use one more time the skip track buttons to choose the track you want to listen then press the
PROG button to enter your choice.
- Repeat the operation to select all the track you want to listen
- Press the PLAY / PAUSE button to start the playback
15. PITCH BEND - BUTTON
The pitch will drop while the - button is pressed and return to the original pitch when it is released.
16. USB PORT
Allows the connection of any USB memory stick.
17. PITCH BEND + BUTTON
The pitch will automatically rise when the + button is pressed and return to the original pitch when
it is released.


Product specificaties

Merk: Skytec
Categorie: DJ Gear
Model: STX-120

Heb je hulp nodig?

Als je hulp nodig hebt met Skytec STX-120 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding DJ Gear Skytec

Handleiding DJ Gear

Nieuwste handleidingen voor DJ Gear