SIIG CE-MT0H11-S1 Handleiding

SIIG Wandsteun CE-MT0H11-S1

Bekijk gratis de handleiding van SIIG CE-MT0H11-S1 (8 pagina’s), behorend tot de categorie Wandsteun. Deze gids werd als nuttig beoordeeld door 46 mensen en kreeg gemiddeld 4.7 sterren uit 23.5 reviews. Heb je een vraag over SIIG CE-MT0H11-S1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/8

Low Profile Universal TV Mount

23" to 42"

Installation Instructions

04-0660B

Important: If you have difficulty following or understanding these installation instructions,

please consult a qualified installation specialist.

Fixed Flat-Panel TV Wall Mount

Material: 2.0mm Cold Rolled Steel Plate

TV size: 23" - 42"

Max load capacity: 132lbs / 60kgs

Wall distance: 1.38" / 35mm

Bubble level included

Universal Mounting Pattern

Caution

• Prior to installation of this product, the installation instructions should be read and

completely understood. The installation instructions must be read to prevent personal

injury and property damage. Keep these installation instructions in an easily accessible

location for future reference.

• This mount contains small parts which can act as a choking hazard if swallowed.

• CAUTION: The maximum load capacity is 132lbs. Use with products exceeding the

maximum load capacity may cause serious injury. See apparatus instructions.

• The wall structure must be capable of supporting at least five (5) times the maximum

load capacity as indicated. If not, the wall must be reinforced.

• Recommended mounting surfaces: wood stud and solid-flat concrete/brick. If the

mount is to be installed on any surface other than wood studs, solid concrete or brick,

use suitable hardware (not included but commercially available).

• Do not install on a structure that is prone to vibration, movement or chance of impact.

Failure to do so could result in damage to the display and/or damage to the mounting

surface.

• Do not install near heater, fireplace, air conditioning, in direct sunlight or any other heat

producing source. Failure to do so may result in damage to the display and could

increase the risk of fire.

• Make sure no water or natural gas lines are present where the mount is to be installed.

Cutting or drilling into water or natural gas lines could cause personal injury or property

damage.

• When mounting to wood studs, it is recommended that a maximum 5/8" particle board

be used.

• Proper installation procedure by yourself or a qualified service technician, as outlined

in the installation instructions, must be adhered to. Failure to do so could result in

serious personal injury.

• When mounting to a wall that contains wood studs, confirm the dead center of the wood

stud prior to installation, it is recommended that the wood studs be a minimum of 16"

apart (if applicable).

• This product is intended for indoor installation/use only. Premature product failure or

serious personal injury could occur if this product is used outdoors.

• It is recommended that two people perform the installation. Injury and/or damage can

result from dropping or mishandling the display.

• If you don't understand these installation instructions, please consult an installation

specialist.

Tools Required

• Electronic stud finder for drywall installation

• Phillips head screw driver

• 7/16" socket and wrench

• Electric drill, 1/8" (3mm) drill bit for wood stud installation, 5/16" (8mm) masonry drill

bit for concrete/brick wall installation

Product specificaties

Merk:	SIIG
Categorie:	Wandsteun
Model:	CE-MT0H11-S1
Kleur van het product:	Zwart
Gewicht:	2200 g
Breedte:	530 mm
Diepte:	36 mm
Hoogte:	350 mm
Materiaal behuizing:	Staal
Montagewijze:	Muur
Geschikt voor schermmaten:	23 - 42 "
Maximale gewichtscapaciteit:	60 kg
Compatibiliteit:	LCD/Plasma
Montage interface compatibiliteit (min):	200 x 100 mm
Montage interface compatibiliteit (max):	200 x 200 mm