Sigma 10-20mm f4-5.6 EX DC HSM Handleiding

Sigma Lens 10-20mm f4-5.6 EX DC HSM

Lees hieronder de 📖 handleiding in het Nederlandse voor Sigma 10-20mm f4-5.6 EX DC HSM (1 pagina's) in de categorie Lens. Deze handleiding was nuttig voor 66 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

Thank you very much for purchasing a Sigma Lens. In order to get the maximum

performance and enjoyment out of your Sigma lens, please read this instruction booklet

thoroughly before you start to use the lens.

DESCRIPTION OF THE PARTS (fig.1)

① Filter Attachment Thread

② Focus Ring

③ Distance Scale

④ Focus Index Line

⑤ Zoom Ring

⑥ Focus Mode Switch (SIGMA SA / CANON AF / FOUR THIRDS)

⑦ Mount

⑧ Lens Hood

DC LENS

These are special lenses that are designated for digital cameras because the lens image

circle is designated to correspond to the size of the image sensors of most digital SLR

cameras. The specialized design gives these lenses the ideal properties for digital cameras.

◆ An image sensor element larger than those corresponding to APS C cannot be used in -

digital cameras or 35mm SLR cameras. If such an element is used vignetting will occur

on the picture surface.

◆ If you use SD14, SD10 or SD10 digital cameras, corresponding angle of view will be

17 34- mm.

ATTACHING TO CAMERA BODY

When this lens is attached to the camera body it will automatically function in the same way

as your normal lens. Please refer to the instruction booklet for your camera body.

◆ On the lens mount surface, there are a number of couplers and electrical contacts.

Please keep them clean to ensure proper connection. To avoid damaging the lens, be

especially sure to place the lens with its front end down while changing the lens.

◆ Many accessories such as rear mounted teleconverters, extension tubes, etc., are

specially made for designated lenses. Before you purchase such accessories, please

check your Sigma lens to determine that it is compatible and that the accessories will

function properly with it.

SETTING THE EXPOSURE MODE

The sigma lens functions automatically after mounting to your camera. e, refer to Pleas the

camera instruction book.

FOCUSING AND ZOOMING

《FOR SIGMA AF, CANON AF, NIKON AF AND FOUR THIRDS》

This lens features Sigma’s built-in Hyper Sonic Motor (HSM). The HSM enables quick and

quiet autofocusing.

For autofocus operation, set the focus mode switch on the lens to “AF” position (ﬁg.2) (for

Nikon AF, s Thirds, select the elect the autofocus mode on your camera body) (F -or Four

autofocus mode on your camera body and set the focus mode switch on the lens to the

“ ” AF position).

If you wish to focus manually, set the focus mode switch on the lens to t “ ” he Mposition.

(for Nikon AF, select the manual focus mode on your camera body as you would do

normally) (F -or Four Thirds, select the manual focus mode on your camera body and set the

focus mode switch on the lens to the “ ” Mposition). You can adjust the focus by turning the

focus ring.

◆ This lens also permits manual focusing even in the autofocus mode. With the camera

set to the One Shot AF (AF S) mode, you can adjust focus manually after the lens - -

autofocus (and stops), while the shutter button is pressed halfway. (In the case of

Four-Thirds fitting, the setting method varies depending on the camera body. Please

follow the instruction manual of your camera body.)

◆ When operating this lens in manual focus mode, it is recommended that correct focus be

conﬁrmed visually in the viewﬁnder rather than relying on the distance scale. This is due

to possible focus shift resulting from extreme changes in temperature which cause

various components in the lens to expand and contact. Special allowance is made for

this at the inﬁnity setting.

《FOR SONY AF AND PENTAX AF》

For autofocus operation, set the camera’s focus mode to AF.

If you wish to focus manually, set the camera s focus mode to ’ “MF” and adjust the focus by

turning the focus ring.

◆ To avoid damaging AF , please do not turn mechanism the focus ring manually while in

the autofocus mode.

◆ When operating this lens in manual focus mode, it is recommended that correct focus be

conﬁrmed visually in the viewﬁnder rather than relying on the distance scale. This is

due to possible focus shift resulting from extreme changes in temperature which cause

various components in the lens to expand and contact. Special allowance is made for

this at the inﬁnity setting.

《》ZOOMING

Rotate the Rubber grip on the zoom ring to the desired position.

LENS HOOD

A bayonet type detachable hood is provided with the lens. This lens hood helps to prevent

flare and ghosted images caused by bright illumination from outside the picture area.

Attach the hood and turn clockwise until it stops rotation. (ﬁg.3)

◆ In order to place the lens and hood into the storage case, you must first remove the

hood, then replace it on the lens in the reverse position. (fig.4)

FLASH PHOTOGRAPHY

Built-in flash of your c may not cover angle of view of this lens, and this may cause amera

light fall-off at the corners. When external flash is used, flip wide panel of your flashgun

down to cover flash’s head, before taking picture.

(This may not work with some ﬂashguns, please test your equipment shootings

beforehand)

FILTER

◆ Only one ﬁlter should be used at the time. Two or more ﬁlters and/or special thicker

ﬁlters, like a polarizing ﬁlter, may cause vignetting.

◆ When us ngi a polarizing ﬁlter with AF camera, “use the circular” type.

BASIC CARE AND STORAGE

◆ Avoid any shocks or exposure to extreme high or low temperatures or to humidity.

◆ For extended storage, choose a cool and dry place, preferably with good ventilation. To

avoid damage to the lens coating, keep away from mothballs or naphthalene gas.

◆ Do not use thinner, benzine or other organic cleaning agents to remove dirt or finger

prints from the lens elements. Clean by using a soft, moistened lens cloth or lens tissue.

◆ This lens is not waterproof. When you use the lens in the rain or near water, keep it

from getting wet. It is often impractical to repair the internal mechanism, lens elements

and electric components damaged by water.

◆ Sudden temperature changes may cause condensation or fog to appear on the surface

of the lens. When entering a warm room from the cold outdoors, it is advisable to keep

the lens in the case until the temperature of the lens approaches room temperature.

TECHNICAL SPECIFICATIONS

Lens construction - 10 14

Angle of View 102.4 63.8 – °

Minimum Aperture 22

Minimum Focusing Distance 24cm (0.79 ft)

Magnification 1:6.7

Filter Size 77mm

Dimensions D L ) ia.×ength 83.5×81mm (3.3×3.2 in

Weight 4 (1 ) 65g 6.4 oz

Dimensions and weight include the SIGMA mount.

The CE Mark is a Directive conformity mark of the European

Community (EC).

SIGMA - -(Deutschland) GmbH Carl Zeiss Str. 10/2, D-63322 Rödermark, F.R.GERMANY

Verkauf 01805 01805 85 01805: -90 90 85-0 Service: -90 90 85- Fax: -90 90 85-35

ENGLISH

Product specificaties

Merk:	Sigma
Categorie:	Lens
Model:	10-20mm f4-5.6 EX DC HSM
Kleur van het product:	Zwart
Gewicht:	465 g
Diameter:	83.5 mm
Brandpuntbereik:	10 - 20 mm
Lensstructuur (elementen/groepen):	14/10
Lengte:	81 mm
Compatibiliteit:	DG UV 77mm\nDG WIDE CIRCULAR PL 77mm\nLH825-04
Dichtstbijzijnde focus afstand:	0.24 m
Maximum aperture number:	22
Minimum aperture number:	4
Vergroting:	1:6.7 x
Maat filter:	77 mm
Lens type:	Super-groothoeklens
Component voor:	SLR
Kijkhoek lens, diagonaal:	102.4 °
Aantal diafragma bladen:	6
Compatibele camera merken:	Sony
Ultrasonische motor (USM):	Ja