SE Electronics DM1 Dynamite Handleiding

SE Electronics Microfoon DM1 Dynamite

Lees hieronder de 📖 handleiding in het Nederlandse voor SE Electronics DM1 Dynamite (6 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
sE sElectronic
®
DM1
User Man ual
We would like to thank you cordially for choosing
this sE DM1! We hope you enjoy using it as much
as we enjoyed designing and building it for you.
The DM1 is an active inline preamp intended to
be inserted between a passive ribbon or dynamic
microphone and a microphone preamplier.
Providing a robust 28dB of gain, the DM1 is the
perfect way to boost the signal from a passive
mic, reduce the likelihood of interference, and
provide signicantly improved level to your
preamp – all without adding noise or coloration.
With a sophisticated class-A design and
specially-selected high-grade FETs, the DM1 has
the lowest self-noise in its class. Additionally, the
28dB of gain it provides is always a consistent
28dB regardless of the connected load, thanks
to its dedicated output buffer amplier. Its
output impedance is also the lowest in its class,
allowing it to drive long cable runs and reduce
the likelihood of RF interference, buzz and hum.
Reliable operation even in demanding on-
stage applications in dicult environments is
ensured by the roadworthy and slim all-metal
design, robust construction, and high-quality
manufacturing standards.
Note: the DM1 requires phantom power for
operation but with microphones does not work
than require phantom power, e.g. condenser
microphones or some active ribbon microphones.
Thank you!
This product conforms to the standards listed
in the Declaration of Conformity. Technical data
subject to change without notice.
Safety & Maintenance
To ensure proper operation, the DM1 requires
a phantom power source providing 48 Volts
according to IEC 61938.
Powering
Do not connect the DM1 to any
power supply other than a phantom
power source (input with phantom
power or external IEC standard
phantom power supply) with a
fl oating connector, using a balanced
cable with studio grade connectors
to IEC 268-12 only. This is the only
way to ensure safe and reliable
operation.
Risk of Damage
Please make sure that the pieces
of equipment to which your DM1
will be connected ful l the safety
regulations enforced in your country
and are  tted with a ground lead.
Risk of Damage

Product specificaties

Merk: SE Electronics
Categorie: Microfoon
Model: DM1 Dynamite

Heb je hulp nodig?

Als je hulp nodig hebt met SE Electronics DM1 Dynamite stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Microfoon SE Electronics

SE Electronics

SE Electronics V2 Switch Handleiding

27 Maart 2024
SE Electronics

SE Electronics T1 Handleiding

11 Maart 2024
SE Electronics

SE Electronics DM2 TNT Handleiding

11 Maart 2024
SE Electronics

SE Electronics sE4100 Handleiding

11 Maart 2024
SE Electronics

SE Electronics V7 MC2 Handleiding

26 Februari 2024
SE Electronics

SE Electronics V7 MC1 Handleiding

26 Februari 2024
SE Electronics

SE Electronics VR2 Handleiding

26 Februari 2024
SE Electronics

SE Electronics Harp Blaster HB52 Handleiding

26 Februari 2024
SE Electronics

SE Electronics X1 S Handleiding

7 Juli 2023
SE Electronics

SE Electronics Gemini II Handleiding

7 Juli 2023

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon

Sony

Sony F-115B Handleiding

26 April 2024
Sony

Sony ECM-66BC Handleiding

26 April 2024
Sony

Sony ECM-GZ1UBMP Handleiding

26 April 2024
Sony

Sony ECM-77LM Handleiding

26 April 2024
Sony

Sony ECM-77BC Handleiding

26 April 2024
Shure

Shure AXT910 Handleiding

17 April 2024
Shure

Shure ADX3 Handleiding

17 April 2024
DAP Audio

DAP Audio CM-95 Handleiding

9 April 2024
DAP Audio

DAP Audio WPS Guitar Handleiding

9 April 2024
Audix

Audix M55D Handleiding

9 April 2024