Schneider Galaxy VX Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Schneider Galaxy VX (2 pagina's) in de categorie UPS. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
Installation 990–9989–001 01/2017
Galaxy VX Flexible Busbars Kit 0J-0446
Important Safety Instructions — SAVE THESE
INSTRUCTIONS
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Electrical equipment must be installed, operated, serviced, and maintained
only by qualified personnel.
• Apply appropriate personal protective equipment (PPE) and follow safe
electrical work practices.
• Turn off all power supplying the UPS system before working on or inside the
equipment.
• Before working on the UPS system, check for hazardous voltage between all
terminals including the protective earth.
• The UPS contains an internal energy source. Hazardous voltage can be
present even when disconnected from the mains supply. Before installing or
servicing the UPS system, ensure that the units are OFF and that mains and
batteries are disconnected. Wait five minutes before opening the UPS to
allow the capacitors to discharge.
• The UPS must be properly earthed/grounded and due to a high leakage
current, the earthing/grounding conductor must be connected first.
Failure to follow these instructions will result in death or serious injury.
Compatibility Matrix
The flexible busbars kit 0J-0446 is used for the grounding connections between the
cabinets.
Refer to the matrix below to see in which scenarios the flexible busbars must be
used.
Power cabinet with serial number
<ID1648000000
Power cabinet with serial number
>ID1648000000
750 kW I/O cabinet (GVXIOCG) Supplied busbars Flexible busbar kit
1000 kW I/O cabinet (GVXI1000KG and
GVXI1000KH)
Flexible busbar kit Supplied busbars
1500 kW I/O cabinet (GVXI1500KD) Flexible busbar kit Supplied busbars
Power cabinet with serial number
<ID1648000000
Supplied busbars Flexible busbar kit
Power cabinet with serial number
>ID1648000000
Flexible busbar kit Supplied busbars
Schneider Electric As standards, specifications, and design
change from time to time, please ask for
confirmation of the information given in this
publication.
© 2017 – 2017 . All rightsSchneider Electric
reserved.
35 rue Joseph Monier
92500 Rueil Malmaison — France
Phone: + 33 (0) 1 41 29 70 00
www.schneider-electric.com
Galaxy VX Flexible Busbars Kit 0J-0446 Install Flexible Busbars
Install Flexible Busbars
Contents
• Four flexible busbars
• Eight M8 x 25 hexagonal torx with washer
1. Access the busbars by following the procedures in the installation manual
supplied with the UPS.
2. Install the flexible busbars following one of the two methods below. Two flexible
busbars are required for each ground connection. Fasten with the provided
bolts or the nuts provided with the UPS.
NOTE: When only one hole is accessible join the two cables and fasten with
one bolt.
2 990–9989–001
Product specificaties
| Merk: | Schneider |
| Categorie: | UPS |
| Model: | Galaxy VX |
Heb je hulp nodig?
Als je hulp nodig hebt met Schneider Galaxy VX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding UPS Schneider
22 November 2022
Handleiding UPS
- UPS HP
- UPS AEG
- UPS Siemens
- UPS Apc
- UPS Dell
- UPS Digitus
- UPS Eaton
- UPS Emerson
- UPS Furman
- UPS Gembird
- UPS Gys
- UPS Lenovo
- UPS Riello
- UPS Voltcraft
- UPS Jung
- UPS Steren
- UPS Tripp Lite
- UPS Approx
- UPS Block
- UPS LC-Power
- UPS Energenie
- UPS CyberPower
- UPS Adj
- UPS East
- UPS Liebert
- UPS Avocent
- UPS Minute Man
- UPS Minuteman
- UPS Maruson
- UPS Phoenix Contact
- UPS Puls Dimension
- UPS Vanson
- UPS Salicru
- UPS SurgeX
- UPS Murr Elektronik
- UPS Altronix
- UPS Ditek
- UPS Bxterra
- UPS Middle Atlantic
- UPS FSP
- UPS Atlantis Land
- UPS PowerWalker
- UPS FSP/Fortron
Nieuwste handleidingen voor UPS
17 April 2024
17 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
21 Maart 2024