Ryobi RHT6260RL Handleiding

Ryobi Heggenschaar RHT6260RL

Lees hieronder de 📖 handleiding in het Nederlandse voor Ryobi RHT6260RL (16 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

RHT5555R

RHT6260RL

ORIGINAL INSTRUCTIONS

Electric Hedge Trimmer

Important!

It is essential that you read the instructions in this manual before operating

this machine.

6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV

Safety

GENERAL SAFETY WARNINGS

WARNING

Read all safety warnings and all instructions. Failure

to follow the warnings and instructions may result in

HOHFWULFVKRFN¿UHDQGRUVHULRXVLQMXU\

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless)

power tool.

WORK AREA SAFETY

ŶKeep work area clean and well lit. Cluttered or dark

areas invite accidents.

ŶDo not operate power tools in explosive

atmospheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

ŶKeep children and bystanders away while operating

a power tool. Distractions can cause you to lose

control.

ELECTRICAL SAFETY

ŶPower tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk

of electric shock.

ŶAvoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

ŶDo not expose to rain or damp conditions. Water

entering a power tool will increase the risk of electric

shock.

ŶDo not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase

the risk of electric shock.

ŶWhen operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of electric

shock.

ŶIf operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

PERSONAL SAFETY

ŶStay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under the

influence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result in

serious personal injury.

ŶUse personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries.

ŶPrevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your finger on the

switch or energising power tools that have the switch

on invites accidents.

ŶRemove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to

a rotating part of the power tool may result in personal

injury.

ŶDo not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

ŶDress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

ŶIf devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

POWER TOOL USE AND CARE

ŶDo not force the product. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

ŶDo not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

ŶDisconnect the plug from the power source and/or

the battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

ŶStore idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

ŶMaintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

ŶKeep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

ŶUse the power tool, accessories and tool bits etc.

Product specificaties

Merk:	Ryobi
Categorie:	Heggenschaar
Model:	RHT6260RL
Kleur van het product:	Groen
Gewicht:	3800 g
Stroombron:	AC
Onbelast toerental aantal slagen:	1500 spm
Motorvermogen:	620 W
Lemmetlengte:	600 mm
Bladtand afstand:	27 mm