Roland MDS-9V Handleiding


Bekijk gratis de handleiding van Roland MDS-9V (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.8 sterren uit 3 reviews. Heb je een vraag over Roland MDS-9V of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/2
Contents of the Package
Stand (MDS-9V)
Hi-hat mount Cymbal mount x 2
Owners Manual
(this leaet)
Drum key
Cable clip x 4
Cable tie x 2
WARNING
002a
Do not open or perform any internal modications
on the unit.
003
Do not repair or replace parts by yourself
Do not attempt to repair the unit, or replace parts
within it (except when this manual provides specic
instructions directing you to do so). Refer all servicing
to your retailer, the nearest Roland Service Center,
or an authorized Roland distributor, as listed on the
“Information.
004
Do not use or store in the following types of locations
Subject to temperature extremes (e.g., direct
sunlight in an enclosed vehicle, near a heating duct,
on top of heat-generating equipment); or are
Damp (e.g., baths, washrooms, on wet oors); or are
Exposed to steam or smoke; or are
Subject to salt exposure; or are
Humid; or are
Exposed to rain; or are
Dusty or sandy; or are
Subject to high levels of vibration and shakiness.
007
Do not place in an unstable location
Make sure you always have the unit placed so it is level
and sure to remain stable. Never place it on stands
that could wobble, or on inclined surfaces.
013
Adults must provide supervision in places where
children are present
When using the unit in locations where children are
present, be careful so no mishandling of the unit can
take place. An adult should always be on hand to
provide supervision and guidance.
WARNING
014
Do not drop or subject to strong impact
Protect the unit from strong impact.
(Do not drop it!)
CAUTION
101e
Use only stand manufactured by Roland
This stand for use only with specic Roland musical
instruments. See apparatus instructions. Use with
other models is capable of resulting in instability
causing possible injury.
101f
Evaluate safety issues before using stands
Make sure to rmly tighten all clamps and bolts after
you have assembled the stand and attached a pad
or unit to it. You should probably also try to make a
habit of checking and retightening them if necessary
before every performance. You risk injury if you have
loose screws or clamps, since a pad or unit can fall
unexpectedly.
104
Manage cables for safety
Try to prevent cords and cables from becoming
entangled. Also, all cords and cables should be placed
so they are out of the reach of children.
106
Avoid climbing on top of the unit, or placing heavy
objects on it
Never climb on top of, nor place heavy objects on
the unit.
CAUTION
118d
Keep small items out of the reach of children
To prevent accidental ingestion of the parts listed
below, always keep them out of the reach of small
children.
Included Parts
cable clips, cable ties
Removable Parts
screws, washers, nuts, springs, hand knobs
Used for instructions intended to alert the
user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic animals
or pets.
Used for instructions intended to alert the
user to the risk of death or severe injury
should the unit be used improperly.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In the
case of the symbol at left, it means that the power-cord
plug must be unplugged from the outlet.
The symbol alerts the user to important instructions or
determined by the design contained within the triangle. In
the case of the symbol at left, it is used for general
cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never be
carried out (are forbidden). The specific thing that must
not be done is indicated by the design contained within
the circle. In the case of the symbol at left, it means that
the unit must never be disassembled.
About WARNING and CAUTION Notices
About the Symbols
ALWAYS OBSERVE THE FOLLOWING
Placement
354a
Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it
inside an enclosed vehicle, or otherwise subject it to temperature extremes. Excessive
heat can deform or discolor the unit.
355b
When moved from one location to another where the temperature and/or humidity
is very dierent, water droplets (condensation) may form inside the unit. Damage or
malfunction may result if you attempt to use the unit in this condition. Therefore, before
using the unit, you must allow it to stand for several hours, until the condensation has
completely evaporated.
356
Do not allow rubber, vinyl, or similar materials to remain on this unit for long periods of
time. Such objects can discolor or otherwise harmfully aect the nish.
361
Do not put anything that contains water on this unit. Also, avoid the use of insecticides,
perfumes, alcohol, nail polish, spray cans, etc., near the unit. Swiftly wipe away any liquid
that spills on the unit using a dry, soft cloth.
Maintenance
401a
For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly
dampened with water. To remove stubborn dirt, use a cloth impregnated with a mild, non-
abrasive detergent. Afterwards, be sure to wipe the unit thoroughly with a soft, dry cloth.
402
Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of
discoloration and/or deformation.
Additional Precautions
553
Use a reasonable amount of care when using the hand knobs, pipes, and mounts. Rough
handling can lead to be damaged.
559a
When you need to transport the unit, package it in the box (including padding) that it
came in, if possible. Otherwise, you will need to use equivalent packaging materials.
USING THE UNIT SAFELY IMPORTANT NOTES
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES. These sections provide
important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp
of every feature provided by your new unit, Owners manual should be read in its entirety. The manual should be saved and kept on hand as
a convenient reference.
1. Loosen hand knobs A (two locations) and spread open the left
and right legs of the stand as shown in the illustration (Fig. 2).
2. Loosen the hand knob of snare pipe “B, and pull out the snare
pipe in the direction of the place where the drummer sits.
3. Adjust pad mounts C” (four locations) as shown in the
illustration (Fig. 1).
4. Attach cymbal mounts “D” (two locations) and hi-hat mount “E” as shown in the illustration
(Fig. 1).
5. If the stand wobbles, use the drum key to loosen Bolts “F” (two locations) and adjust the
height.
* Do NOT loosen any bolts other than Hand Knobs and Bolts “F” except when changing the parts or cables
for repairing.
Caution in Setting Up the Stand
The tip of the mount is sharp. Handle it with care.
When setting up or storing the stand, be careful not to pinch the
ngers you use to handle the stand.
Regarding the way of mounting a sound module, pads, or cymbals,
please refer to the owners manual supplied with them.
Do not spread open the stand farther than 135 degrees as shown in
the illustration (Fig. 3). Nor should you spread the stand wider than 1.2
meters (48 inches).
1.2 m (48”)
135˚
135˚
How to Set Up the Stand
Fig. 1 Fully Assembled View
Fig. 2
How Leg Pipes Are Spread
Fig. 3
View of Stand When Spread Open
* If the drum stand is to be used for extended periods in the same location, we recommend using a
Roland drum mat (TDM series) to prevent discoloration of ooring by the rubber feet.
* In the interest of product improvement, the specications and/or appearance of this unit are subject
to change without prior notice.
Copyright © 2011 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
Roland and V-Drums are registered trademarks of Roland Corporation in the United States and/or other countries.
D: Cymbal mounts
C: Pad mounts
C: Pad mounts
A: Hand knobs
F: Bolts
B: Snare pipe
E: Hi-hat mount
内容物
□ スタンドMDS-9V□ ハイハット・マウント
□ シンバル・マウント ×
□ 取扱説明書(本書)
□ ドラム・キー
□ ケーブル・クリップ ×4
□ ケーブル・タイ ×2
このしくお使いいただくために、ご使の前に「安全上のご意」と「使上のごい。
また、この器の優れた機能を十分ご理解ただくためにも、取説明書をよくみください。取説明書は必なときにすぐ
ることができるよう、手元にいてください。
© 2011 ローランド株式会社 本書の一、もしくは全無断写、転載することをじます。
Roland、V-Drums は、日本国およびその他の国におけるローランド式会の商または登録です。
1.
ハンド・ノブ(A、2 カ所)をゆるめ、左右のスタンド脚
イプを図2のように開きます。
2.
スネアパイプ(B、1 カ所)のハンドノブをゆるめ、スネア
パイプを演奏者側に引き出します。
3.
パッドマウント(C、4 カ所)を図1のように調整します。
4.
シンバル・マウント(D、2 所)ハイハット・マウント(E、1 カ所)を図1のように
調整します。
5.
スタンドがぐらつく場合は、必要に応じてボルト(F、2 カ所)をドラム・キーでゆるめて
高さを調整します。
ハンドノブ以外のボルトF は、パイプなどのパーツ交換時以外、ゆるめないでください。
組み立て時の注意
マウントの先はとがっています。取り扱いに意して作してください。
スタンドをセッティング及びするは、スタンドを持っている指をはさまないように意してく
ださい。
音源、パッド、シンバルの取り付方法については、お使い
品の取扱説明書をごください。
スタンドを 135 度以上外側にはかないでください。
また、両のスタンドパイプの距離 1.2m 以上さないでく
ださい 3
1.2m
135˚
135˚
組み立てかた
図1 完成図
図2
スタンド脚パイプの開きかた
図3 スタンドを開いた状態
当ドラム・スタンドを長期間同じ場所で使される場合は、ゴム設置面への
れ付着等の影ために、当社製品のドラム・マットTDM リー
を使されることをお勧めします。
品の仕や外は、改良のため予告なく変することがあります。
火災・感電・傷害を防止するには
以下の指示を必ず守ってください
取り扱いを誤った場合に、使用者
が傷害を負う危険が想定される場
合および物的損害のみの発生が想
定される内容を表しています。
※物的損害とは、家屋・家財およ
び家畜・ペットにかかわる拡大
損害を表しています。
取り扱いを誤った場合に、使用者が
死亡または重傷を負う可能性が想定
される内容を表しています。
警告
注意
注意の意味について警告と
図記号の例
は、強制(必ずすること)を表しています。
具体的な強制内容は、
の中に描かれています。
左図の場合は、「電源プラグをコンセントから抜
くこと」を表しています。
 は、注意(危険、警告を含む)を表していま
す。
具体的な注意内容は、 の中に描かれています。
左図の場合は、「一般的な注意、警告、危険」を
表しています。
 は、禁止(してはいけないこと)を表していま
す。
具体的な禁止内容は、 の中に描かれています。
左図の場合は、「分解禁止」を表しています。
警告
002a
分解や改造をしない
本機を分したり、改造したりしないで
ください。
003
個人で修理や部品交換はしない
理/部品の交などで、取扱説明書
かれていないことは、対にしないで
ください。必ずおい上げ店またはロー
ランドお客様相談センターに相談してく
ださい。
004
次のような場所で使用や保管はしない
のような場所に設置しないでくださ
い。
度が極端い場所(直光の当
たる場所、器のく、発熱する
器の上など
水気(風呂場、洗面台、れた
床など湿度のい場所
湯気油煙が当たる場所
塩害の恐れがある場所
れる場所
ほこりやぼこりの多い場所
振動やれの多い場所
007
不安定な場所に設置しない
本機を、ぐらつく台の上や傾いた場所に
設置しないでください。必ず安定した
平な場所に設置してください。
警告
013
お子様の取り扱いに注意する
お子のいる場所で使する場合、お子
の取り扱いやいたずらに意してくだ
さい。必ず大人のかたが、監視/指導し
てあげてください。
014
落としたり、強い衝撃を与えたりしない
本機としたり、本機に強い衝撃を与
えないでください。
注意
101e
スタンドはローランド製品以外に使用
しない
このスタンドはローランド品専
す。品以外とみ合わせて使うと、
不安定な態となって下や倒を引き
こし、けがをする恐れがあります。
しくは各品の取扱説明書をごくださ
い。
101f
スタンドを使う前に安全を確認する
スタンドを使するときはには、クラン
・ノブやネジを実にめてください。
奏前には実に取り付けられてい
るかどうか確認してください。
実に取り付けられていないと、パッド
やマウントが下してけがをする恐れが
あります。
注意
104
コードやケーブルは煩雑にならないよ
うに配線する
したコードやケーブルは、繁雑
ならないように慮してください。に、
コードやケーブルは、お子の手が届
かないように慮してください。
106
上に乗ったり、重いものを置いたりし
ない
本機の上に乗ったり、器の上にいも
のをいたりしないでください。
118d
小さな部品はお子様の手の届かないと
ころに置く
品はお子ってんだ
りすることのないよう手の届かないとこ
ろへ保してください。
付属品
ケーブル・クリップ、ケーブル・タイ
取りはずしが可
ネジ、ワッシャー、ナット、ス
プリング、ハンド・ノブ
設置について
354a
光の当たる場所や発熱する器のく、め切った内などに
放置しないでください。変形、変することがあります。
355b
極端温湿度のう場所に動すると、内水滴がつく(結露する
ことがあります。そのまま使すると故障の原因になります。数時間
放置して、結露がなくなってから使してください。
356
本機の上にゴム品やビニール品を長時間放置しないでください。
変形、変することがあります。
361
本機の上にの入った容器、殺虫剤、香水アルコールマニキュア、
スプレーなどをかないでください。また、表面に付した体は、
やかに乾いたらかい布で拭き取ってください。
お手入れについて
401a
常のお手入れは、らかい布で乾拭きするか、固くった布で
を拭き取ってください。れがしいときは、中性剤を含んだ布で
れを拭き取ってから、らかい布で乾拭きしてください。
402
や変形の原因となる、ベンジン、シンナー、アルコールは使
しないでください。
修理について
451a
お客本機を分改造された場合、以後の性について保でき
なくなります。また、修をおりする場合もあります。
453a
では、本機能部(製品の機能持するために必
を、製造打切後 6 しています。この品保有期間
期間とさせていただきます。なお、保有期間ぎた後で
も、故障箇所によっては修の場合がありますので、い上げ店、
またはローランドお客様相談センターにご相談ください。
553
故障の原因になりますので、ハンド・ノブ、パイプ、マウントなどに
度の力を加えないでください。
559a
輸送や引っしをするときは、本機が入っていた緩衝材、または
品で包してください。
559c
本機が入っていた緩衝材を廃するときは、各地域のゴミの
分別基に従ってください。
安全上のご注意 使用上のご注意
D:シンバル・マウント
C:パッド・マウント
C:パッド・マウント
A:ハンド・ノブ
F:ボルト
B:スネア・パイプ
E:ハイハット・マウント


Product specificaties

Merk: Roland
Categorie: Niet gecategoriseerd
Model: MDS-9V

Heb je hulp nodig?

Als je hulp nodig hebt met Roland MDS-9V stel dan hieronder een vraag en andere gebruikers zullen je antwoorden