Robert Abbey S2189 Handleiding

Bekijk gratis de handleiding van Robert Abbey S2189 (1 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.1 sterren uit 6 reviews. Heb je een vraag over Robert Abbey S2189 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

ASSEMBLY INSTRUCTIONS FOR YOUR

S2189

(P)

(Q)

(G)

(H)

(I)

(I)

(B)

(A)

(C)

OUTLET BOX

(F)

(E)

(D)

(I)

(I)

(J)

(K)

(L)

(N)

(M)

(O)

ECHO PENDANT

ASSEMBLY INSTRUCTIONS:

1. SHUT OFF THE MAIN ELECTRICAL SUPPLY AT FUSE BOX/ CIRCUIT

BREAKER.

2. Remove all parts from carton. Do not throw away any parts.

3. Remove mounting plate (B) from canopy (D) by removing canopy screws (E).

Set canopy screws (E) aside.

4. Afx mounting plate (B) to ceiling outlet box with mounting plate screws (C),

provided.

5. Measure desired drop for xture to hang and add/remove extension tubes (I) as

needed. Guide wiring through extension tubes before threading tubes together.

TO ADD/REMOVE EXTENSIONS: (Un)Thread the threaded nipple of one

extension into the threaded opening of the next extension. Make sure wiring is

pulled tight when threading extensions together to prevent damage to the wire**

6. Connect hang straight (F) and loop (H) with quick link (G).

7. Thread bottom extension tube (I) onto the threaded nipple above shade washer

(J).

8. Guide wiring from top extension (I) through loop (H), quick link (G) and hang

straight (F), exiting canopy (D). Lift canopy (D) to ceiling outlet box.

9. Make proper electrical connections described in steps 10 - 12. A LICENSED

ELECTRICIAN IS RECOMMENDED.

10. Attach ground wire from xture (green or silver in color) to ground wire from

outlet box. Fasten wires together with wire nut (A) and tightly wrap connection

with electrical tape.

11. Attach hot wire from xture (black in color or smooth side of wire) to hot wire

from outlet box. Fasten wires together with wire nut (A) and tightly wrap

connection with electrical tape.

12. Attach neutral wire from xture (white in color or ribbed side of wire) to

neutral wire from outlet box. Fasten wires together with wire nut (A) and

tightly wrap connection with electrical tape.

13. Carefully push wire connections back into ceiling outlet box.

14. Place canopy (D) over mounting plate (B). Thread canopy screws (E) into

holes in canopy (D), and mounting plate (B) to secure xture to ceiling.

15. Lift shade (M) over bottom section of xture. Slide split washer (L) between

shade washer (J) and shade washer (K). Secure position of shade (M) by

turning shade washer (J) clockwise until it rests rmly against split washer (L).

16. Install three (3) 100W MAX Type A, medium base bulbs into sockets (N).

17. Lift diffuser (P) to tube (O). Pass threaded nipple on plate (Q) through hole in

center of diffuser (P), into tube (O). Turn until hand tight.

***To clean, use soft cloth only. Do not use any chemical or abrasive cleaners.***

IMPORTANT SAFETY INSTRUCTIONS:

*These instructions are provided for your safety. It is very important that

they are read completely before beginning the installation of your xture.

*WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED

ELECTRICIAN.

*Turn off power at switch before replacing bulbs, making sure xture has had

sufcient time to cool down.

*DO NOT subject the xture to any shock while lit as shattering of bulbs may

result.

Product specificaties