Ricoh IM 430FSE Handleiding

Bekijk gratis de handleiding van Ricoh IM 430FSE (2 pagina’s), behorend tot de categorie Printer. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.2 sterren uit 5 reviews. Heb je een vraag over Ricoh IM 430FSE of wil je andere gebruikers van dit product iets vragen? Stel een vraag

IEEE 802.11a/b/g/n/ac Wireless Bridge

Unit Type P26 Setup Guide

Thank you for purchasing the IEEE 802.11a/b/g/n/ac Wireless Bridge Unit Type P26 (herein-

after called this product).

For safe and correct use, be sure to read the “Read This First” before using this product.

This Setup Guide explains how to setup and use this product in a wireless network.

Package Contents

Following items are bundled with this product.



IEEE 802.11a/b/g/n/ac Wireless Bridge Unit



Read This First



LAN cable



Setup Guide (this manual)



AC adapter

Parts and Functions

FRONT

Push switch Press and hold the push switch Starts this product in Conguration Mode:

for 5 sec while this product is active.

Congures this product using Smart Wireless Setup: Press and hold the

push switch for 10 sec while this product is active.

Resets this product to factory default settings: Press and hold the push

switch while turning on this product. Release the switch when the WLAN LED

turns green and then to red.

Link LED (Green/

Orange)

ON (Green): Linked in wired LAN(1000BASE-T).

BLINK (Green): Receiving packets in wired LAN(1000BASE-T).

ON (Orange): Linked in wired LAN (100BASE-TX/10BASE-T).

BLINK (Orange): Receiving packets in wired LAN (100BASE-TX/10BASE-T).

OFF: Wired LAN is not connected.

LAN portConnect the LAN cable.

Power LED (Yellow)ON (Yellow): Powered on

OFF:󰀨

Power connectorConnect the AC adapter.

TOPBOTTOM

POWER LED (Green/

Red/Orange)

ON (Green): Powered on

OFF:󰀨

WLAN LED (Green/Red/

Orange)

ON (Green): Running in Infrastructure mode.

BLINK (Green): Processing setup using the Smart Wireless Setup.

OFF: Wireless LAN is OFF.

*Blinks together with STATUS LED when running in Conguration Mode.

*Turns green and then to red during the initialization.

STATUS LED (Green)

ON (Green):AP is connected.

BLINK (Green): Transferring data.

OFF:AP is not connected.

*Blinks together with WLAN LED when running in Conguration Mode.

MAC AddressMAC Address of this product. For the MAC address to use for wireless

LAN connection, the MAC address of the device connected to a LAN port

of this product will be used (MAC address transparent feature).

Wall-mounting holesUse these to mount this product to a wall (prepare two commercially

available screws).

•Space between the left and right wall-mounting holes: 90 mm

•Distance from the wall to the bottom of the screw head: 2 mm or more

•Screw size (recommended)

Φ3.7mm or less

2.4mm or less



2.4mm or less



When mounting this product to a wall, install it at a height of 2 m or below.

Select a screw length that matches the material and thickness of the wall.

Ricoh accepts no responsibility whatsoever for the product falling or other

󰀩

secured properly after mounting so that it will not fall due to the weight of

the product main unit or cables.

Configuration Method 1 - Setup Using Configuration Mode

When your wireless router supports WPS (Wi-Fi Protected Setup), please start from Configuration Method 2 - Easy Configuration Using Smart Wireless Setup on the back.

Step 1 Start this product in Configuration Mode

1

Connect this product to the PC using the LAN cable that came

with this product.



PC

LAN cable

This product

2

Connect the AC adapter to this product, and the AC

adapter's plug to an electrical outlet.

Electrical Outlet



AC adapter

This product

3

When the POWER LED turns green and the WLAN LED turns on or blinks, press and hold the push switch on the front of this product.

In 5 seconds, the WLAN LED and STATUS LED will start to blink green together. Release the push switch then.

This product will start running in the Configuration Mode and be ready to configure from the PC that has been connected to this product via

a LAN cable.



*If wireless LAN is enabled on your PC, please disable it.

Confirm these LEDs

are blinking

Confirm the LED turns

green or blinks green

Push switch

Push switch

Keep holding

Release the push switch

This productThis product

Step 2 Setup

1

The Web browser is started and the password configuration page

of this product is displayed.

Enter the password to set for this product and click .Submit

*Recommended Web browsers: Microsoft Edge / Safari.

*The login password configuration page is displayed only when this product is

configured for the first time.

* If the Web page is not displayed, enter “http://ricoh” in the address bar of the Web

browser and press the key.Enter

* If the Web page is still not displayed after entering “http://ricoh”, you need to check the

IP address of the PC connected to this product.

If a static IP address is configured to the PC, enter the PC’s address after adding 1 to

its last digit and press key.Enter

2

Enter the login password you have configured and click

Login.

3

The Web page of this product is displayed.

4

Click Easy Configuration at the top of the page.

Select the destination network from Wireless Network List and

enter the WEP Key or Shared Key for Network Key.

Click when finished.Submit

* If the destination network is not displayed in the , click Wireless Network List

Detailed Configuration at the top of the page.

In the page displayed, enter the wireless settings of the network that you wish to

connect this product to, and click the button.Submit

Refer to the HELP for details on each setting.

5

When the confirmation message is displayed, click

Restart to restart this product.

The configuration has now been completed.

Step3 Connect this product to the MFP/printer you wish to use wirelessly

1

Turn off the MFP/printer that you wish to use wirelessly and

connect it to this product using the LAN cable.



MFP/printer

LAN cable

This product

2

Connect the AC adapter to this product, and the AC adapter's plug to

an electrical outlet.

This product

Electrical Outlet

3

Turn on the MFP/printer connected to this product.

* Some MFPs/printers require additional network settings. In such

cases, refer to the manual that came with the MFP/printer.

* When turning on this product and the MFP/printer, be sure to turn on

this product first. Do not press the push switch then.

* This product does not have a power switch, so turn the power on/

off by plugging and unplugging the AC adapter into/from the power

outlet.

(DE) Die deutsche Version der Konfigurationsanleitung können Sie von unserer Website herunterladen.

(FR) Il est possible de télécharger la version française de ce guide d’installation depuis notre page d’accueil.

(IT) La versione italiana della guida all’installazione è scaricabile dalla nostra homepage.

(ES) Puede descargar la versión en español de la guía de configuración desde nuestra página principal.

(NL) U kunt ook de Nederlandse versie van de Installatiehandleiding downloaden van onze website.

(PT-BR) A versão em português do guia de configuração pode ser baixada de nossa página inicial.



(ZH-HK)

您可以從我們的網站下載中文版的安裝指南。

https://www.ricoh.com/support



Model: R-BR-500AC

Product specificaties