Regina Andrew Sydney 17-1012 Handleiding
Pagina's 1 Verlichting
Bekijk de handleiding van Regina Andrew Sydney 17-1012 gratis online of download de PDF. 21 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
Figure 2
ITEM NO:
ITEM NO:
ITEM NO:
ITEM NO:ITEM NO:-1012
-1012
-1012
-1012 -1012
17
17
17
1717
Sydney Outdoor Sco
Sydney Outdoor Sco
Sydney Outdoor Sco
Sydney Outdoor ScoSydney Outdoor Sconce
nce
nce
nce nce
WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED ELECTRICIAN
WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED ELECTRICIAN
WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED ELECTRICIAN
WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED ELECTRICIANWE STRONGLY RECOMMEND INSTALLATION BY A LICENSED ELECTRICIAN.
.
.
. .
These instructions are provided for your safety. It is very important that they are read completely before
beginning the installation of your fixture.
ASSEMBLY INSTRUC
ASSEMBLY INSTRUC
ASSEMBLY INSTRUC
ASSEMBLY INSTRUCASSEMBLY INSTRUCT
T
T
TTION:
ION:
ION:
ION:ION:
A. FOR WIRING DIRECTLY INTO OUTLET BOX (Figure 1)
1. Remove steel retainer from lamp back plate by removing the attachment screws
on the side of the backplate and attach the retainer to the outlet (junction) box.
Adjust the retainer so that the tabs on the side are level.
2. Connect the wires of lamp to the wires of outlet box; a. black outlet--wire to box
black or smooth lamp wire; b. white outlet--wire to black or smooth lamp wire; box
c. bare “grounding” outlet--wire to green wire. box
3. Install lamp to the steel retainer using two flat-head screws.
4. Insert appropriately rated bulb into the socket.
MOUNTING FIXTURE(S) OUTDOOR AND/OR IN A WET LOCATION INSTRUCTION (Figure 2)
1.Mounting surface should be clean, dry, flat and ¼” larger than the canopy/fixture base on all
sides. Any gaps larger than 3/16” should be corrected.
2.With a silicone caulking compound (not included), caulk completely around where the back
of the canopy/back plate meets the wall surface.
CAUTION:
CAUTION:
CAUTION:
CAUTION: CAUTION: FAILURE TO COMPLETELY CAULK AROUND THE LIGHT FIXTURE’S MOUNTING
PLATE COULD RESULT IN WATER SEEPAGE INTO THE LIGHT FIXTURE AND/OR JUNCTION
BOX.
Made in China
Made in China
Made in China
Made in ChinaMade in China
Product specificaties
| Merk: | Regina Andrew |
| Categorie: | Verlichting |
| Model: | Sydney 17-1012 |
Heb je hulp nodig?
Als je hulp nodig hebt met Regina Andrew Sydney 17-1012 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Verlichting Regina Andrew
Regina Andrew Bluff 17-1005 Handleiding Regina Andrew Redford 17-1019 Handleiding Regina Andrew Montecito 17-1031 Handleiding Regina Andrew Happy 17-1033 Handleiding Regina Andrew Peridot 17-1004 Handleiding Regina Andrew Dion 17-1039 Handleiding Regina Andrew Meyer 17-1040 Handleiding Regina Andrew Hampton 17-1017 Handleiding
Alle Regina Andrew Verlichting handleidingen
Populair in Verlichting
Regina Andrew Vista 17-1024 Handleiding Regina Andrew Augustine 17-1013 Handleiding Regina Andrew Beehive 17-1002 Handleiding
Handleiding Verlichting
Nieuwste handleidingen voor Verlichting
Progress Lighting Gilliam P400314 Handleiding Dainolite GIU-1630LEDFH Handleiding Triton Blue Python W7 Handleiding Triton Blue Kosmos 1000 IP65 Handleiding V-Tac VT-55050 Handleiding Progress Lighting P8475 Handleiding Triton Blue Horizon B1 Handleiding Triton Blue Neptune 200 Handleiding Triton Blue Orion B200 Handleiding Dainolite FTS-510LEDFH Handleiding