Regina Andrew Beehive 17-1002 Handleiding
Pagina's 1 Verlichting
Bekijk de handleiding van Regina Andrew Beehive 17-1002 gratis online of download de PDF. 22 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
!
!
ITEM NO: 17100-2
Beehive Outdoor Pendant Large
CAREFULLY INSPECT THE ITEM BEFORE INSTALLATION.
WE STRONGLY RECOMMEND THE ITEM BE INSTALLED .BY A LICENSED ELECTRICIAN
These instructions are provided for your safety. It is very important that they are read completely
before beginning the installation of your fixture.
ASSEMBLY INSTRUCTION:FOR WIRING DIRECTLY INTO THE JUNCTION BOX
1.Turn off the breaker to the junction box at the electrical panel.
2.Inspect all parts and inventory, making sure to check all sides of the packaging for
additional parts.
3.Determine the desired height of the fixture and assemble the appropriate amount of
extension rods and/ or chain.
4.Trim the electrical cords to length, making sure to leave an extra 6-10 inches to make
all connections.
5.Install the crossbar with the attached screw collar loop onto the junction box with the
included machine screws.
6.Carefully slide the screw collar, followed by the canopy through all electrical, extension
tubes and/ or chain.
7.Support the fixture to the screw collar loop using the included quick links.
8.Run all electrical through the screw collar loop into the junction box. Attach ground wire
from fixture to ground wire from junction box. Fasten wires together withwire nut and
tightly wrap connection with electrical tape. Attach hot wire from fixture (black color or
smooth side of wire) to hot wire from junction box.Fasten wires together with wire nut
and tightly wrap connection with electrical tape. Attach neutral wire from fixture (white
in color or ribbed side of wire) to neutral wire fromjunction box. Fasten wires together
with wire nut and tightly wrap connection with electrical tape. Carefully push wire
connections back into ceiling junction box.
9.Carefully slide the canopy up over any extensions and / or chain and secure it to the
ceiling by threading the screw collar onto the screw collar loop.
10.Assemble all additional decorative parts and bulbs.
11.Turn the breaker to the junction box back on and enjoy.
MOUNTING FIXTURE(S) OUTDOOR AND/OR IN A WET LOCATION INSTRUCTION
1.Mounting surface should be clean, dry, flat and ” larger than the canopy/fixture base ¼
on all sides. Any gaps larger than 3/16” should be corrected.
2.With a silicone caulking compound (not included), caulk completely around where the
back of the canopy/back plate meets the wall surface.
CAUTION: FAILURE TO COMPLETELY CAULK AROUND THE LIGHT FIXTURE’S
MOUNTING PLATE COULD RESULT IN WATER SEEPAGE INTO THE LIGHT FIXTURE
AND/OR JUNCTION BOX.
Made in China
Product specificaties
| Merk: | Regina Andrew |
| Categorie: | Verlichting |
| Model: | Beehive 17-1002 |
Heb je hulp nodig?
Als je hulp nodig hebt met Regina Andrew Beehive 17-1002 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Verlichting Regina Andrew
Regina Andrew Peridot 17-1004 Handleiding Regina Andrew Dion 17-1039 Handleiding Regina Andrew Meyer 17-1040 Handleiding Regina Andrew Hampton 17-1017 Handleiding Regina Andrew Montecito 17-1008 Handleiding Regina Andrew Montecito 17-1022 Handleiding Regina Andrew Hampton 17-1016 Handleiding Regina Andrew Vista 17-1024 Handleiding
Alle Regina Andrew Verlichting handleidingen
Populair in Verlichting
Regina Andrew Augustine 17-1013 Handleiding Regina Andrew Bluff 17-1005 Handleiding Regina Andrew Redford 17-1019 Handleiding
Handleiding Verlichting
Nieuwste handleidingen voor Verlichting
Beghelli Saving Slim 75465 Handleiding Beghelli Saving Slim 75464 Handleiding Beghelli Stagna Easy CCT 75462 Handleiding Beghelli 75468 Handleiding Beghelli Saving Slim 75467 Handleiding Beghelli 75458 Handleiding Beghelli Stagna Flat 75457 Handleiding Beghelli Saving Slim 75466 Handleiding Beghelli Stagna Easy CCT 75460 Handleiding Beghelli Saving Slim 75468 Handleiding