Rane NM 48 Handleiding
Rane
Mengpaneel
NM 48
Bekijk gratis de handleiding van Rane NM 48 (16 pagina’s), behorend tot de categorie Mengpaneel. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.9 sterren uit 2.5 reviews. Heb je een vraag over Rane NM 48 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/16
Manual-1
OPERATORS MANUAL NM 48
NETWORK PREAMPLIFIER
WEAR PARTS: This product contains no wear parts.
CobraNet is a trademark of Peak Audio, Inc.
Quick Start
Ok, if you’ve read the NM 84 manual you might get a sense of déjà vu when you read this one. Maybe not quite as
strong as if you were watching another Adam Sandler movie, but déjà vu just the same. The reason for the similarity is that
the complicated stuff (network design) is such a large part of the installation. This is basically the same for both units.
First, design the network – a dedicated network for CobraNet audio is recommended, but not required when using
switch-based networks. The NM 48’s CobraNet technology utilizes standard 100Base-T Ethernet hardware. For CobraNet
and network design assistance and a list of other CobraNet licensed and tested devices, visit www.peakaudio.com/cobranet.
Rear Panel. Connect up to 4 line-level, analog audio inputs to the XLR INPUTS. Each of the eight OUTPUTS can
independently receive any of the 4 Local Input audio channels or any single Audio Channel from one of four CobraNet
Bundles from 1 through 999, plus off/none. Connect the network cable to the 100Base-T RJ-45 jack. The RS-232 jack
transports RS-232 data over the network to other NM, RS-232 device ports. The RS-232 port does not provide control of the
NM 48. Connect contact closures to the MEMORY RECALL PORT (MRP) to recall Memories on this device or any
other NM device(s) connected on the same network. Connect the locking 5-pin DIN jack on the enclosed RS 3 power supply
to the NM 48 POWER connector. The RS 3 power supply does indeed connect earth ground – the 3
rd
pin of the AC line
cord – to the NM 48 chassis metal. Depressing the recessed FP LOCK (Front Panel Lock) button at this point disallows
further front panel setup, so only press this button in once you’re completely done setting up the NM 48.
Front Panel. There are 14 LCD screens allowing access to all NM 48 parameters. The first eight LCD screens set up the
Outputs; Output 1: through Output 8:, respectively. Each of the 8 Outputs can receive any of the local Input channels or
any CobraNet Audio Channel from one of four Bundles. Use the Copy field to copy and paste between the various screens.
The next screen allows the Inputs; Input 1: through Input 4:, to be turned On or Muted.
The NetRx: LCD edit page sets up the four possible CobraNet Bundles (Bndl) that the NM 48 can receive from the
network; use NetRx’s Bndl A, Bndl B, Bndl C and Bndl D fields to set the received Bundle(s).
The four NM 48 Input audio channels can be transmitted on up to 4 different CobraNet Bundles. Each of the 4 Bundles
contains all four Input audio channels and are transmitted in 24-bit resolution. CobraNet designates each of the four, Audio
Channels (i.e., AudCh 1 through AudCh 4, respectively). The Network Transmit LCD screen (NetTx) allows selection of
the four Bundles to transmit, each of which are independently assignable to one of the 999 Bundles using the four NetTx
fields; Bndl A, Bndl B, Bndl C and Bndl D.
The Mem (Memory) LCD screen allows 16 unique NM 48 setups to be stored and recalled in the 16 memory locations.
Additionally, the NM 48’s MRP status can be transmitted over the network for other NM devices to “listen to.” Set the
MRP Tx (MRP Transmit) and MRP Rx (MRP Receive) fields for any or none of the 16 available MRP channels. The Serial:
LCD screen sets the RS-232 serial port’s Baud rate and the 232 Tx and 232 Rx fields which set the transmit and receive
RS-232 channels. There are 255 serial data channels available for transport over the network.
The final Config: LCD screen displays the current/editable IP Address and the editable Name of the NM 48 device (8
characters max). Set the IP address to 0.0.0.0 (the default) to enable CobraNet’s Discovery Utility (Disco) to dynamically
assign the IP address. Peak Audio’s Discovery Utility allows you to plug into a CobraNet network with a standard Ethernet
computer card (NIC) and discover all of the CobraNet devices on the network. The Disco software utility has the ability to
dynamically assign IP addresses as well as update CobraNet firmware on the discovered CobraNet devices. Disco is
available from www.peakaudio.com/cobranet as well as many music retailers which carry The Village People, KC & the
Sunshine Band, Wild Cherry and the like.
Do yourself a favor and at least read the Important Big Picture Concepts section found elsewhere in this manual.
Reviewing the Network Examples provides insight into a logical order for design work and would also be a way to avoid
initial confusion.
Manual-2
Front Panel Description
Output Meters should be self explanatory. They are peak meters. The only quirk to these meters is the Mute condition
which is indicated by only the top red indicator – and no others – illuminated.
Edit buttons are provide a quick and convenient way to get to the Edit page for the individual Outputs.
LCD Display which displays Edit Pages.
DATA wheel. Allows adjustment of the underlined parameter after it is selected with the Page (see ) and Cursor (see )
buttons. Turn the DATA wheel clockwise to increase the parameter, turn it counterclockwise to decrease the parameter.
Page buttons. The Previous Page << and Next Page >> buttons scroll through all Edit Pages. When the EXE button is
pressed and held and MAX >> is pressed, the selected parameter jumps to its highest or to a larger value (see ).
Cursor buttons. When pressed, the Previous < and Next > Cursor buttons move the cursor through each of the adjustable
fields on each page. These buttons select each adjustable parameter along the bottom row by moving the underline cursor
left < or right >. When any parameter is selected, the DATA wheel adjusts that parameter. When the EXE button is pressed
and held and MIN > is pressed, the selected parameter jumps to its lowest or to a smaller value (see ).
EXE (Execute) button. Several commands are implemented with this button. Pressing EXE when the Copy, Paste and
Load # commands are underlined executes that function. Holding down EXE while pressing MAX >> alters the selected
parameter to its highest or higher nominal value. Holding down EXE while pressing MIN > alters the selected parameter to
its lowest or lower value or Off.
Pin 1 and Chassis Grounding Note
All XLR pin 1s on the NM 84 connect directly to the chassis metal via the XLR jack case itself. (Thank Neutrik for
providing both a female and a male XLR jack which provide manufacturers with this function.) While viewing the XLR
jacks, the lower right screw next to each jack provides the chassis connection. Keeping these screws tight ensures optimal
shielding and electromagnetic interference performance.
Product specificaties
| Merk: | Rane |
| Categorie: | Mengpaneel |
| Model: | NM 48 |
Heb je hulp nodig?
Als je hulp nodig hebt met Rane NM 48 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Mengpaneel Rane
18 Juni 2025
18 Juni 2025
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
Handleiding Mengpaneel
- Heritage Audio
- Nordland
- Velleman
- Nektar
- DataVideo
- Auna Pro
- Golden Age Project
- Elysia
- The T.mix
- Santos
- CaterChef
- Chandler
- Alto Professional
- Extron
- Nedis
Nieuwste handleidingen voor Mengpaneel
17 Juni 2025
3 Juni 2025
21 Mei 2025
21 Mei 2025
21 Mei 2025
20 Mei 2025
20 Mei 2025
20 Mei 2025
19 Mei 2025
12 Mei 2025