Rane MP 44 Handleiding


Bekijk gratis de handleiding van Rane MP 44 (9 pagina’s), behorend tot de categorie Mengpaneel. Deze gids werd als nuttig beoordeeld door 19 mensen en kreeg gemiddeld 4.1 sterren uit 6 reviews. Heb je een vraag over Rane MP 44 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/9
Manual-1
MP 44
DJ MIXER
OPERATORS MANUAL
QUICK START
If you have used just about any DJ mixer on the planet, you will instantly feel at home using the MP 44. Extra care was
taken to ensure that controls are where you expect them to be, and operate as you expect them to.
The MP 44 has some unique features not found on other DJ mixers. It is important that you read at least this portion of
the manual so that you get the maximum benefit from these unique features. As you refer through the rest of this manual (as
Club Managers Section
High performance Master Limiteraffects both House and Booth signals. This control is located on the rear panel and
screw driver adjust to prevent tampering. The Limiter is a safety net designed to protect ears and equipment.
Automatic Emergency Page Inputprovides a means to automatically interrupting all program material and broadcast
emergency messages at a pre set level. The EMERGENCYPAGElevel is set independentof HOUSE-and BOOTH
LEVELLEVELcontrol settings. The EMERGENCYPAGE control is a recessed, screw driver adjusted control
located on the rear panel to prevent tampering after installation. See page Manual-6 for more details.
Remote DC Master Level Control Portprovides a means to control the level of the MASTERmix from a remote
location. The range of control is 0 dB to –40 dB. Applications include “gain riding” DJs, setting a comfortable listening
level from a remote location and reducing the maximum available gain. To use the optionalVR 1 Remote Control,
simply connect like labeled pins together. Shielded wire is recommended. See page Manual-7 for more details.
DJ Features Section
High performance Master Limiteraffects both House and Booth signals. The Limiter is a safety net designed to protect
ears and equipment. Under normal operating conditions, the LIMITindicator should only flash occasionally. If you are
running gains high enough to cause hard limiting, faders and tone controls will not respond as expected. For example, if
you run signal levels 10 dB over the Limit threshold, you must turn signal levels down 10 dB before you hear a reduc-
tion in level. See page Manual-5 for more details.
3-band Tone Controls with full cut (off to +6 dB) on each of the four Input Buses. You know what to do with this!
FlexFX™ assignmentallows any combination of the four Input Buses to be processed by the FlexFX Loop, regardless of
A-side, B-side or Post crossfader assignment! See page Manual-3 for details
WARNING: Do not operate this unit without the line cord earth ground connected. To do so may increase the risk of
electric shock and increase line cord conducted emissions.
WEAR PART
This product contains the following wear part subject to the ninety (90) day
warranty period described on page Warranty-1: (1) Active Crossover Assembly.

Beoordeel deze handleiding

4.1/5 (6 Beoordelingen)

Product specificaties

Merk: Rane
Categorie: Mengpaneel
Model: MP 44

Heb je hulp nodig?

Als je hulp nodig hebt met Rane MP 44 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden