Rane MM 8x Handleiding
Rane
Mengpaneel
MM 8x
Bekijk gratis de handleiding van Rane MM 8x (9 pagina’s), behorend tot de categorie Mengpaneel. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 5.0 sterren uit 2.5 reviews. Heb je een vraag over Rane MM 8x of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/9
Manual-1
OPERATORS MANUAL
MM 8x MIXER
QUICK START
Here are a few basic “plug and play” steps to get you performing. If you are a first time DJ mixer user, please do
yourself a favor and at least read this section.
Begin by making sure your amplifier is off before making connections. The MM 8x has all unbalanced connectors,
except for the 1/4” balanced main outputs and XLR microphone inputs. Plug a source component, such as a CD player,
into one of the four LINE inputs on the rear. Connect the MAIN OUTPUTS to your amplifier. Set all front panel controls
to the middle of their travel and all pushbuttons to their out position. Slide the MASTER LEVEL down to 0. Set an
INPUT SELECT switch to your active source input. Plug in the MM 8x’s power supply and see the PWR indicator
illuminate. Turn on your source and amplifier. Slowly turn up the and see the meters lighting and hearMASTER LEVEL
music from your speakers.
In use, you can get tripped up at two places. If you have a phono signal into one of the four PH/LN inputs, be sure the
PH/LN switch is in the PHONO position (in); likewise, when using a tape deck or CD into these inputs, be sure the switch
is in the LINE (out) position. If you plug into the PROGRAM LOOP, the internal signal path is broken. Be sure that a
complete loop is made, to and from an outside device.
Couldn’t be easier, right?
Never connect anything except a Rane power supply to the thing that looks like a telephone jack on the rear or the
unit. This is an AC input and requires special attention if you do not have a power supply exactly like the one originally
packed with your unit. See the full explanation of the power supply requirements elsewhere in this manual.
Manual-2
FRONT PANEL DESCRIPTION
1. MAIN MIC ON switch: This switch puts the Main Mic signal into the mixer signal path. When the switch is pressed in, the
Main Mic is on and the adjacent red LED blinks.
2. Front panel MAIN MIC input: This 3-pin XLR input connects a balanced microphone. A parallel Main Mic input is on the
rear of the unit. Do not connect microphones to both front and rear Main Mic inputs.
3. MAIN MIC LEVEL control: This control adjusts the level of the Main Mic input.
4. MIC OVERLOAD indicator: This red LED monitors both microphone signals, before and after Mic EQ. It lights when the
signal exceed the Mic section’s output capability (3 dB below clipping). Occasional flickering is acceptable; however,
steady lighting requires a reduction in the Mic LEVEL control to prevent distortion.
5. AUX MIC ON switch: This switch puts the Aux Mic signal into the mixer signal path. The adjacent red LED blinks when
the switch is pressed in, indicating that the Aux Mic is on.
6. AUX MIC LEVEL control: This control adjusts the level of the Aux Mic input.
7. MIC EQ: These controls are used to contour the frequency response of the summed Main and Aux Microphone inputs.
8. Source Input Select switch: This switch selects either a Phono/Line or Line input for the channel. In the center position the
channel input is muted.
9. Source EQ: These controls are used to contour the frequency response of the selected source input.
10. Source Input fader: This fader controls the level of the input selected for the channel.
11. ACTIVE CROSSFADER: This fader controls the relative output level from the summed A and B mixes. When the fader
is at its far left, only the A mix is heard from the outputs. As the fader is moved toward the right, the amount of B mix is
increased and the amount of A mix is decreased. When the fader is centered, equal amounts of A and B mixes are routed to
the outputs. Fully right is all B mix at the outputs.
Manual-3
12. Meter and Mode switch: This peak-dBu reading meter displays one of two modes, depending on the switch position. In
the out position, the meter indicates the stereo level in LEFT and RIGHT Main Output. In the in position, mono CUE level is
displayed on the LEFT side and mono PROGRAM level is displayed on the RIGHT side.
13. MASTER LEVEL fader: This control determines the output level at the Main Outputs.
14. AUX OUT LEVEL control: This control adjusts the level of the Aux Output signal.
15. AUX IN LEVEL control: This control adjusts the level of an Auxiliary input.
16. AUX INPUT: This stereo pair of RCA connectors is an extra line level input which sums with other signals before the
Master Level controls.
17. AUX OUTPUT: This stereo pair of RCA connectors provides an extra line level output mix. This is the same signal as the
Main Outputs.
18. CUE switches: Pressing in any or all of the CUE pushbuttons routes the respective channel signal to the Headphone and
Meter Cue sections. The adjacent yellow indicator illuminates when the switch is depressed.
19 HEADPHONE PAN control: This control adjusts the relative levels of Cue and Master signals mixed together in stereo for
the headphones. Counterclockwise rotation increases the amount of Cue signal; clockwise rotation increases the amount of
Master signal.
20. HEADPHONE LEVEL control: This control adjusts the volume for the headphones as they are driven from the Master
and Cue signals.
21. HEADPHONE Output jack: This stereo ¼" TRS jack accepts ¼" TRS stereo headphone plugs (do not use mono plugs).
22. POWER “ON” indicator: When the yellow LED is lit, the MM 8x is ready to go.
Fader Care:
With heavy use in harsh environments, the faders may need lubrication. Rane recommends spraying one or two bursts
of CaiLube MCL into the fader. Work the fader back and forth a few times after spraying. This treatment extends
longevity and can make used faders as good as new.
Order CaiLube MCL
®
from:
CAIG Laboratories, Inc.
12200 Thatcher Ct.
Poway, CA 92064
Phone 619-486-8399
Fax 619-486-8398
Web www.caig.com
Product specificaties
| Merk: | Rane |
| Categorie: | Mengpaneel |
| Model: | MM 8x |
Heb je hulp nodig?
Als je hulp nodig hebt met Rane MM 8x stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Mengpaneel Rane
18 Juni 2025
18 Juni 2025
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
Handleiding Mengpaneel
- JTS
- M-GAME
- CaterChef
- RCF
- DAP
- Speco Technologies
- Marquant
- Wharfedale
- Akai
- Nektar
- Elysia
- Alecto
- Alto
- Heritage Audio
- Redmond
Nieuwste handleidingen voor Mengpaneel
17 Juni 2025
3 Juni 2025
21 Mei 2025
21 Mei 2025
21 Mei 2025
20 Mei 2025
20 Mei 2025
20 Mei 2025
19 Mei 2025
12 Mei 2025