Rane MM 12 Handleiding
Rane
Mengpaneel
MM 12
Bekijk gratis de handleiding van Rane MM 12 (13 pagina’s), behorend tot de categorie Mengpaneel. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 3.9 sterren uit 3 reviews. Heb je een vraag over Rane MM 12 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/13
1. WARRANTY EXPLANATION
Rane offers a limited warranty which covers both parts and labor necessary to repair any
defects in the manufacturing of the MM 12.
The warranty period for the MM 12 is two (2) years, and is determined from either of these two
methods, whichever is longer:
l. Starting from the date of retail purchase as noted on either the sales slip from an
authorized Rane dealer, or on the warranty registration card sent in to the factory,
or:
2.Starting from the date of manufacture which is coded on both the inside and outside of
the MM 12 chassis, in case the sales slip or warranty card is not available.
If you send in the registration card or retain your sales slip as proof of purchase, you will receive
a full two (2) year warranty period from the date of purchase regardless of the date of
manufacture. If you do not send in the registration card (”I forgot..“), or you do not have a sales
slip from an authorized Rane dealer (“My cat ate it..“), the MM 12 will be underwarranty only
within two (2) years from the date of manufacture.
All registered warranties are tracked by SERIAL NUMBER, not by owner. Once your MM 12 is
registered it will be covered the full two (2) years regardless of any change in ownership.
Should you encounter any problems with the MM 12 be sure to contact either your local Rane
dealer or the Rane factory before taking the MM 12 anywhere for repairs. We will help you to
identify and locate any specific malfunctions, possibly avoid needless shipment, or instruct
you as to the speediest method for authorized repair.
If you must send the MM 12 to the factory or warranty station, BE SURE TO INCLUDE THE
FOLLOWING INFORMATION:
1. YOUR COMPLETE NAME AND SHIPPING ADDRESS.
2. THE SERIAL NUMBER OF YOUR MM 12.
3. A COMPLETE DESCRIPTION OF ANY AND ALL PROBLEMS YOU ARE EXPERIENCING
WITH THE MM 12.
Never ship the MM 12 in any shipping carton other than the original or a replacement supplied
by Rane. Ship only by a reputable carrier-we do not recommend parcel post due to a high
incidence of damage or loss. Be sure to insure the package for the full replacement value.
Note: Be sure to remove the MM 12 from any rack or carrying case prior to shipment to the
factory or a warranty station, otherwise you will be charged for the additional time to remove
and reinstall the unit
If you need further assistance concerning the repair, installation or operation of your MM 12
please feel free to contact Rane galactic headquarters at
Rane Corporation
10802 47th Ave. W.
Mukilteo, WA 98275
Phone: (425)355-6000
II. FRONT PANEL DESCRIPTION
1. POWER SWITCH:
The adjacent yellow LED will light when power to the MM 12 is turned
on by means of this switch.
2. INPUTS:
These automatic balanced/unbalanced three-pin jacks are to be used for both
microphone or line level inputs. Rane adheres to the international standard pin configuration.
which is:
Pin I: Case ground.
Pin 2: Hot (signal).
Pin 3: Circuit ground.
3. PATCH OUTPUTS:
The MM 12 provides a hard-wire type splitter which allows the input
to each channel to be patched back out to the main mixing console or other equipment. The
MM 12 simply ”taps” off each splitter with high impedance amplifiers, without causing any
noise contribution, distortion or signal degradation to the main mix.
4. ACCESSORY LOOP:
These stereo l/4” jacks allow the insertion of effects, additional EQ
or the like in series with the input stage. These jacks are located POST EQ with the following
Tip/Ring/Sleeve (TRS) configuration:
Tip is SEND (output)
Ring is RETURN (input)
Sleeve is GROUND
These LOOP jacks may also be used to patch channels 1 a, 8a, 8b or 8c to the AUX inputs of the
other channels, using a mono patch cord. Refer to Section IV-1B.
5. AUX INPUT:
This is a SUMMING input which allows another line level signal to be added
to the regular input program. This input is POST EQ, and can also be used to reassign channels
1a, 8a, 8b, or 8c; refer to Section IV-1B.
6. OVERLOAD INDICATOR:
This red LED will light wheneverthe input stage reaches 4 dB
below clipping. More than occasional blinking of this LED means that the input gain control
should be turned down to avoid clipping.
7.
INPUT GAIN CONTROL:
This varies the gain of the input stage to suit the requirements
of various microphones, instruments and line level equipment ranging from a minimum of 10
dB in the LINE mode to a maximum of 70 dB in the MIC mode.
8. MIC/LINE SWlTCH: In the MIC position (out) the input stage has a gain range of 20 dB to
70 dB; in the LINE position (in) the gain has a range of 10 dB to 30 dB.
9. INPUT EQUALlZATlON SECTlON: The BASS control provides +-14 dB of boost/cut at 20
Hz. shelving type. The MIDRANGE control is a bandpass lter centered at 1k Hz which
provides +-10 dB of boost/cut The TREBLE control provides +-12 dB of boost/cut at 20k HZ.
shelving type.
10.
MAINS INPUT: Plug the stereo headphone output from the main mixing console into
this input then you will hear the main mix program through headphones plugged into the MM
12.
Whenever any of the CUE buttons on the MM 12 is pressed, the mains input will be
bypassed and you will hear the desired mix in the MM 12. You may also use a stereo l/4” patch
cord to connect the Mains Input to any of the input LOOP jacks to achieve input cueing-see
the following note for wiring requirements.
NOTE:
To use the Mains Input for cueing input signals with the headphones, use a
stereo l/4” patch cord WITH THE TIP AND RING CONNECTED TOGETHER at either
end. This will allow you to cue any input through the LOOP jack without removing the
signal from any of the MM 12 outputs. IF A MONO PATCH CORD IS USED FOR INPUT
CUEING, THE INPUT SIGNAL WILL BE REMOVED FROM THE MIX OUTPUTS SINCE
THE LOOP RETURN IS BEING GROUNDED.
11. HEADPHONE OUTPUT: Plug any type of monitoring headphones into this stereo
output to monitor any of the MM 12 outputs using the CUE buttons as well as the mains mix
when no CUE button is depressed.
Product specificaties
| Merk: | Rane |
| Categorie: | Mengpaneel |
| Model: | MM 12 |
Heb je hulp nodig?
Als je hulp nodig hebt met Rane MM 12 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Mengpaneel Rane
18 Juni 2025
18 Juni 2025
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
Handleiding Mengpaneel
- American Audio
- AV:link
- Audiophony
- The T.mix
- Silvercrest
- Solid State Logic
- M-GAME
- ADB
- Denon
- TeachLogic
- Redmond
- Fagor
- LD Systems
- Heritage Audio
- DataVideo
Nieuwste handleidingen voor Mengpaneel
17 Juni 2025
3 Juni 2025
21 Mei 2025
21 Mei 2025
21 Mei 2025
20 Mei 2025
20 Mei 2025
20 Mei 2025
19 Mei 2025
12 Mei 2025