Rane MH 4 Handleiding
Rane
Mengpaneel
MH 4
Bekijk gratis de handleiding van Rane MH 4 (8 pagina’s), behorend tot de categorie Mengpaneel. Deze gids werd als nuttig beoordeeld door 22 mensen en kreeg gemiddeld 4.9 sterren uit 11.5 reviews. Heb je een vraag over Rane MH 4 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8
Manual-1
OPERATORS MANUAL
QUICK START
Conect the output from any stereo source such as a mixer or tape deck, and plug the left and right inputs into the
respective INPUT jacks. The Inputs accept balanced or unbalanced sources. Just plug them in. This source is now routed to
each of the four Outputs.
For a single mono source feeding all headphones, connect it to either one of the INPUT jacks and engage the STEREO/
MONO switch. Set the CHANNEL LEVEL controls for individual headphone levels.
Never connect anything except a Rane power supply to the thing that looks like a telephone jack on the rear of the
unit. This is an AC input and requires special attention if you do not have a power supply exactly like the one originally
packed with your unit. See the full explanation of the power supply requirements elsewhere in this manual.
WEAR PARTS: This product contains no wear parts.
MH 4
HEADPHONE AMPLIFIER
Manual-2
STEREO/MONO switch
Converts the INPUTS from stereo to mono so
that a single input cable drives both sides of
the headphones. In some instances a
STEREO program may be confusing for live
monitoring purposes, and switching to MONO
improves intelligibility by summing the Left
and Right signals.
OVERLOAD indicators
The red LEDs light when the input signal
exceeds the MH 4’s output capability (3 dB
below maximum). Occasional flickering is
acceptable.The overload point automatically
varies with the headphones used.
Chassis ground point
A screw is supplied for chassis grounding
purposes. This unit comes with an outboard
power supply which does not ground the
chassis through the line cord. The MH 4 can
be grounded either to another chassis which
is earth grounded, or directly to the
grounding screw on an AC outlet cover by
means of a wire connected to this chassis
grounding screw.
Remote POWER supply input
The unit is supplied from the factory with a
Model RS 1 remote power supply suitable for
connection to this input jack. The power
requirements of the unit call for an 18 volt
AC center-tapped transformer only. This is
not a telephone jack. Never use a
power supply with your unit other than
the one supplied or a replacement
approved by Rane Corporation.
Using any
other type of supply may damage the unit
and void the warranty.
Product specificaties
| Merk: | Rane |
| Categorie: | Mengpaneel |
| Model: | MH 4 |
Heb je hulp nodig?
Als je hulp nodig hebt met Rane MH 4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Mengpaneel Rane
18 Juni 2025
18 Juni 2025
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
Handleiding Mengpaneel
- Electrolux
- Moulinex
- Koda
- Cuisinart
- Team
- Icon
- Flama
- Speco Technologies
- API Audio
- Caso
- ANT
- Karma
- Mackie
- Akai
- Pyle
Nieuwste handleidingen voor Mengpaneel
8 September 2025
8 September 2025
8 September 2025
8 September 2025
12 Augustus 2025
12 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025