Pyle PLR34M Handleiding

Pyle Autoradio PLR34M

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PLR34M (11 pagina's) in de categorie Autoradio. Deze handleiding was nuttig voor 74 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11

PLR34M

OWNER’S MANUAL

Mobile Audio System

 PLL Synthesizer Stereo Radio

 Automatic Memory Storing

 Preset Equalization

 USB Interface

 SD/MMC Interface

www.pyleaudio.com

CONTENTS

Installation ........................................... 3

Take out screw before installation ......... 3

DIN Front-Mount ................................. 3

Installing the unit ............................... 3

Removing the unit ............................. 4

Wiring Connection .............................. 5

Operation ............................................. 6

Location of keys .................................... 6

Switching on/off the unit ........................ 7

Sound adjustment ................................. 7

Display information ............................... 7

Liquid crystal display ............................. 7

Auxiliary input ........................................ 7

Reset function ....................................... 7

Radio operation ..................................... 7

Switching to radio mode .................... 7

Selecting the frequency band ............ 7

Selecting station ................................ 7

Automatic memory storing&

program scanning .............................. 8

Station storing ................................... 8

USB play operation ............................... 8

Selecting tracks in single step ........... 8

Selecting directory up/down .............. 8

Pausing playing ................................. 8

Previewing all tracks .......................... 8

Repeating the same track ................. 8

Playing all tracks in random .............. 8

SD/MMC operation ............................... 8

Remote control .................................... 9

Specification ........................................ 10

Trouble shooting ................................. 11

INSTALLATION

Notes:

 Choose the mounting location where

the unit will not interfere with the

normal driving function of the driver.

 Before finally installing the unit,

connect the wiring temporarily and

make sure it is all connected up

properly and the unit and the system

work properly.

 Use only the parts included with the

unit to ensure proper installation. The

use of unauthorized parts can cause

malfunctions.

 Consult with your nearest dealer if

installation requires the drilling of holes

or other modifications of the vehicle.

 Install the unit where it does not get in

the driver’s way and cannot injure the

passenger if there is a sudden stop,

like an emergency stop.

 If installation angel exceeds 30°from

horizontal, the unit might not give its

optimum performance.

 Avoid installing the unit where it would

be subject to high temperature, such as

from direct sunlight, or from hot air,

from the heater, or where it would be

subject to dust, dirt or excessive

vibration.

DIN FRONT-MOUNT

Installation Opening

This unit can be installed in any dashboard

having an opening as shown below:

Installing the unit

Be sure you test all connections first, and

then follow these steps to install the unit.

1. Make sure the ignition is turned off, and

then disconnect the cable from the

vehicle battery’s negative (-) terminal.

2. Disconnect the wire harness and the

antenna.

3. Mount the sleeve by inserting the sleeve

into the opening of the dashboard and

bend open the tabs located around the

sleeve with a

screwdriver. Not all tabs will be able to

make contact, so examine which ones

will be most effective. Bending open the

appropriate tabs behind the dashboard

to secure the sleeve in place.

Tabs

Screwdriver

Sleeve

Dashboard

4. Reconnect the wire harness and the

antenna and be careful not to pinch any

wires or cables.

5. Slide the unit into the sleeve until it

locks into place.

6. To further secure the unit, use the

supplied metal strap to secure the back

of the unit in place. Use the supplied

hardware (Hex Nut (M5mm) and Spring

Washer) to attach one end of the strap

to the mounting bolt on the back of the

unit. If necessary, bend the metal strap

to fit your vehicle’s mounting area. Then

use the supplied hardware (Tapping

53mm

182mm

Product specificaties

Merk:	Pyle
Categorie:	Autoradio
Model:	PLR34M
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Bluetooth:	Nee
Ondersteund audioformaat:	MP3,WMA
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	MMC,SD
FM-radio:	Ja
MP3 afspelen:	Ja
ID3 Tag weergave:	Ja
Ondersteunde frequentiebanden:	AM,FM
Aantal voorkeurszenders:	30
USB direct afspelen:	Ja
FM-band:	87.5 - 107.9 MHz
CD-R afspelen:	Nee
CD-RW afspelen:	Nee
Afstandsbediening inbegrepen:	Ja
Te gebruiken met een iPod:	Nee
Type beeldscherm:	LCD
AM band bereik:	530 - 1710 kHz