Pyle PLMRKT32WT Handleiding

Pyle Autoradio PLMRKT32WT

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PLMRKT32WT (14 pagina's) in de categorie Autoradio. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14

OWNER’S MANUAL

Mobile Audio System

• PLL Synthesizer Stereo Radio

• Automatic Memory Storing

• Preset Equalization

• USB Interface

• Auxiliary Input Function

• Remote Control

PLMR18

www.pyleaudio.com

PLMRKT32

Installation ........................................3

Take out screw before installation......3

DIN Front-Mount (Method A) .............3

Installing the unit ............................3

Removing the unit...........................4

DIN Rear-Mount (Method B) ..............5

Wiring Connection ...........................6

Operation ..........................................7

Location of keys.................................7

Switching on/off the unit....................8

Sound adjustment..............................8

Loudness ...........................................8

Display ...............................................8

Mute...................................................8

Equalization........................................8

Remote sensor...................................8

Reset function....................................8

Radio operation .................................8

Switching to radio mode ................8

Selecting the frequency band.........8

Selecting station.............................8

Automatic memory storing &

program scanning...........................8

Station storing ................................9

Scan................................................9

Mono/Stereo...................................9

Weather band selection..................9

USB play operation............................9

SD/MMC operation..........................11

Specification...................................12

Trouble shooting ............................13

CONTENTS

Notes:

• Choose the mounting location where

the unit will not interfere with the

normal driving function of the driver.

• Before finally installing the unit,

connect the wiring temporarily and

make sure it is all connected up

properly and the unit and the system

work properly.

• Use only the parts included with the

unit to ensure proper installation.

The use of unauthorized parts can

cause malfunctions.

• Consult with your nearest dealer if

installation requires the drilling of holes

or other modifications of the vehicle.

• Install the unit where it does not get in

the driver’s way and cannot injure the

passenger if there is a sudden stop,

like an emergency stop.

• If installation angle exceeds 30º from

horizontal, the unit might not give its

optimum performance.

• Avoid installing the unit where it would

be subject to high temperature, such

as from direct sunlight, or from hot air,

from the heater, or where it would be

subject to dust, dirt or excessive

vibration.

DIN FRONT/REAR-MOUNT

This unit can be properly installed either

from “Front” (conventional DIN Front-

mount) or “Rear” (DIN Rear-mount

installation, utilizing threaded screw holes

at the sides of the unit chassis).

For details, refer to the following

illustrated installation methods.

30º

TAKE OUT SCREW BEFORE

INSTALLATION

Before install the unit, please remove the

two screws.

DIN FRONT-MOUNT (Method A)

Installation Opening

This unit can be installed in any dashboard

having an opening as show below:

Installing the unit

Be sure you test all connections first, and

then follow these steps to install the unit.

1. Make sure the ignition is turned off,

and then disconnect the cable from

the vehicle battery's negative (-)

terminal.

2. Disconnect the wire harness and the

antenna.

3. Press the release button on the front

panel and remove the control panel

(see the steps of “to detach front

panel”).

4. Lift the top of the outer trim ring then

pull it out to remove it.

5. The two supplied keys release tabs

inside the unit's sleeve so you can

remove it. Insert the keys as far as they

will go (with the notches facing up) into

the appropriate slots at the middle left

and right sides of the unit. Then slide

the sleeve off the back of the unit.

182 mm

53 mm

Take out screw before installation

INSTALLATION

Product specificaties

Merk:	Pyle
Categorie:	Autoradio
Model:	PLMRKT32WT
Kleur van het product:	Wit
Ingebouwd display:	Ja
Geïntegreerde klok:	Ja
Bluetooth:	Nee
Ondersteund audioformaat:	MP2, MP3, WMA
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	MMC, SD
Aantal luidsprekers:	2
FM-radio:	Ja
Uitgangsvermogen:	200 W
MP3 afspelen:	Ja
AUX ingang:	Ja
Ondersteunde frequentiebanden:	AM, FM
Aantal voorkeurszenders:	30
USB direct afspelen:	Ja
CD-R afspelen:	Nee
CD-RW afspelen:	Nee
Type beeldscherm:	LCD
Kleur toetsenverlichting:	Blauw
Line outputs (RCA):	2