Pyle PLMR91US Handleiding

Pyle Autoradio PLMR91US

Lees hieronder de 📖 handleiding in het Nederlandse voor Pyle PLMR91US (12 pagina's) in de categorie Autoradio. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
The round-style headunit receiver radio features Bluetooth technology allowing music to wirelessly stream from
your compatible Bluetooth enabled device. Control the audio from a distance - -- all from your handheld device.
Marine grade waterproof construction makes this unit perfect for upgrading your marine audio system. The input
and output connectors allow you to connect external devices and speaker systems for a more convenient and
selective listening experience.
Warning:
It is recommended you seek the assistance of a professional upon installation.
Be sure to provide adequate clearance behind the receiver where mounting. Be sure as to avoid obstruction of any existing
wires, fuel lines, electronic circuitry or vehicle safety features prior to installation. Make sure to safely and securely prepare the
area of installation as to avoid any disruption of your vehicle's mechanical, electrical or safety systems.
Choose a mounting location with a flat surface to ensure a flush and water- tight fit.
To prevent any interference, distortion or accidental operation due to radio frequency waves or extreme temperature, --
choose a mounting and installation location farthest from the engine compartment.
Disconnect the battery to ensure there will be no shorted wires during the installation procedure.
Do not submerge the unit in water.
Installation of Marine audio components requires experience a variety of mechanical and electrical and expertise with
knowledges and practices This user manual basic and instructions for your new . provides general installation and operation
marine receiv installation er, it may not show the exact methods which may be required for your particular installation. Always
consult a professional prior to installation and mounting.
Care and Maintenance:
Clean the player with a slightly damp, soft a mild cloth using household cleaner. Do not use solvents such as benzene, thinner,
or commercially cleaners. other hazardous chemical Be sure to regularly inspect the connections on the rear of the unit for
corrosion and correct as needed.
Mounting:
Choose a mounting location on the dash allow room for proper connecting to the power source./ instrument panel that will
Take into consideration and the antenna jack if how you will use the input connectors, output connectors, USB connector
necessary. area interior Prepare the for installation by carefully removing any trim panels and obtrusive materials as
necessary. Route wire harnesses away from sharp edges, and ensure that no harnesses wire/connector will be pinched or
pierced during reassembly.
Once a suitable location has been determined, drill the hole and secure the stereo using the included screws and metal
mounting shape U- bracket.
Cut a hole in the ted area with a diameter of 3.0'' and depth of at least 3.9'' (to accommodate for the bracket mounting designa
hardware and cables/wiring.) Make sure the receiver fits snug into the drilled opening.
Insert the screw bolts into the back of the receiver. The then slides "U" bracket over the screw bolts and secures eceiver the r
to the dash opening, using hex nuts to tighten the fit. T hex nuts can continue to be tightened against thehe bracket for secure
and stable fitting against your dash / console panel.
Before cutting any panel, ALWAYS ensure that there is sufficient clearance behind the panel, and that no wire harnesses, fuel
lines, moving linkages, or any other critical components are exposed to damage by your choice of location. NEVER risk damage
to the hull while cutting your opening.
2
CONTENTS
Installation ........................................... 3
Wiring Connection .............................. 5
Operation ............................................. 6
Location of keys .................................... 6
Turn on/off the unit ................................ 7
Display time .......................................... 7
Auxiliary input 7.......................................
Reset function ....................................... 7
Radio operation 7 ....................................
Switching to radio mode .................... 7
Selecting the frequency band ............ 7
Selecting station ................................ 7
Preset stations selecting 7 ...................
Automatic memory storing ................. 8
USB play operation ............................... 8
Selecting tracks in single step ........... 8
Pausing playing ................................. 8
Selecting songs by BND button ......... 8
BT operation ......................................... 8
Specification .......................................10
Trouble shooting ................................. 11


Product specificaties

Merk: Pyle
Categorie: Autoradio
Model: PLMR91US
Kleur van het product: Grijs
Ingebouwd display: Ja
Bluetooth: Ja
Bluetooth-versie: 2.1+EDR
Ondersteund audioformaat: MP3, WMA
USB-poort: Ja
Aantal USB-aansluitingen: 1
USB-versie: 2.0
Uitgangsvermogen: 56 W
Impedantie: 4 Ohm
Peak Music Power Output (PMPO): 112 W
Frequentiebereik: 20 - 20000 Hz
Signaal/ruis-verhouding: 55 dB
MP3 afspelen: Ja
Optische drive type: Nee
Ondersteunde frequentiebanden: AM, FM
USB direct afspelen: Ja
FM-band: 87.5 - 107.9 MHz
CD-R afspelen: Nee
CD-RW afspelen: Nee
AM band bereik: 530000 - 1710000 kHz
Line outputs (RCA): 1

Heb je hulp nodig?

Als je hulp nodig hebt met Pyle PLMR91US stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Autoradio Pyle

Handleiding Autoradio

Nieuwste handleidingen voor Autoradio