Pyle PLMR2DNBK Handleiding
Bekijk gratis de handleiding van Pyle PLMR2DNBK (16 pagina’s), behorend tot de categorie Autoradio. Deze gids werd als nuttig beoordeeld door 27 mensen en kreeg gemiddeld 4.5 sterren uit 14 reviews. Heb je een vraag over Pyle PLMR2DNBK of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/16


www.PyleUSA.com
2
To ensure correct operation and avoid damage,
please read this user manual carefully before using this product.
INSTALLATION
Installation Procedures
First complete the electrical connections and then check for correctness.
Installation Opening
This unit can be installed in any dashboard having an opening as shown below.
To Install the Car Radio
Be sure you test all connections rst, and then follow these steps to install this unit.
1. Make sure the ignition is turned o, and then disconnect the cable from the
vehicle battery’s negative (-) terminal.
2. Disconnect the wire harness and the antenna.
3. ” brackets (2pcs) on the both sides of the car receiver with screws Attach the “L
(M5.5 x 7) as shown as the below gure. The others xing screws that x the
other terminal of the “ ” metal bracket, please buy from your dealer according L
to the drilling of holes size.
4. Consult with you nearest dealer if installation requires the drilling of holes or
other modications of the vehicle.
5. Install this car receiver in the dashboard.
6. Make wiring connections, as illustrated in the “Wiring Diagram.”
7. Install the plastic outer trim ring.
103 mm
182 mm

www.PyleUSA.com 3
INSTALLATION
Connect all wiring harness and slide the head unit into the mounting collar
until it clicks into place.
Wiring Connections
ANT: Radio Antenna Socket
FL: Front Left Pre-Amp RCA Output (White)
FR: Front Right Pre-Amp RCA Output (Red)
RL: Rear Left Pre-Amp RCA Output (White)
RR: Rear Right Pre-Amp RCA Output (Red)
10A: 10A Fuse
ACC/ignition (Red)
GND/ground (Black)
ANT/aerial (BLUE)
Power/battery (Yellow)
- +12V DC Negative Ground.
- Only use speakers with 4 ohms impedance.
- The maximum current of the Amp remote trigger is 200mA.
Product specificaties
Merk: | Pyle |
Categorie: | Autoradio |
Model: | PLMR2DNBK |
Heb je hulp nodig?
Als je hulp nodig hebt met Pyle PLMR2DNBK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Autoradio Pyle
5 December 2024
5 December 2024
5 December 2024
5 December 2024
5 December 2024
5 December 2024
2 Mei 2023
30 April 2023
18 April 2023
8 April 2023
Handleiding Autoradio
- Audison
- Toxic
- Cartronix
- Telefunken
- Norauto
- Eclipse
- Tamashi
- Deaf Bonce
- Autovision
- Xomax
- Dual
- Blaupunkt
- Impulse
- Mystery
- Revo
Nieuwste handleidingen voor Autoradio
22 Mei 2025
21 Mei 2025
21 Mei 2025
20 Mei 2025
20 Mei 2025
20 Mei 2025
19 Mei 2025
19 Mei 2025
30 Maart 2025
28 Maart 2025