Projecta IS1500 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Projecta IS1500 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
12 Volt 1500 Amp Intelli-Start
LITHIUM JUMPSTARTER
P/No. IS1500
2
IMPORTANT SAFETY INFORMATION
Please read this manual thoroughly before use and store in a safe place for future reference.
WARNINGS
• Do not jumpstart 24V batteries. This unit is designed for 12V vehicles only and will not
operate when used on 24V vehicles.
• Risk of explosive gas. Working in the vicinity of car batteries can be dangerous.
Batteries release explosive gases during normal operation, charging and while jumpstarting
a battery. Before using this jumpstarter, read and follow the instructions carefully.
Follow all manufacturer’s instructions and warnings of the vehicle’s battery and other
equipment being used.
• Jumpstart lead acid batteries only. Do not use to jumpstart dry cell batteries commonly
found in household appliances. These batteries may burst and cause injury and/or
property damage.
• Do not smoke, use matches, use a cigarette lighter, or allow a spark or flame near the battery.
• Do not allow metal to come in contact with the battery posts. It may spark or short-circuit the
battery and cause an explosion.
• Remove rings, bracelets, necklaces and watches when working with a lead acid battery.
• The Jumpstarter contains a sealed non-spillable Lithium Iron Phosphate battery. It must be
disposed of properly.
• Ensure correct polarity when connecting to vehicle.
• Do not submerge jumpstarter in water, keep out of the rain.
• IS1500 is not rain proof and is not designed to be left outside of extended periods of time or
submerged in water.
• Do not store the jumpstarter in temperatures above 450C or below -100C as this can affect the
health of the battery.
IMPORTANT CHARGING INFORMATION
• Charge the IS1500 jumpstarter prior to use, this may take up to 24 hours.
• Recharge the jumpstarter after every use and follow charging instructions.
• When the jumpstarter is not in use ensure it is always on charge.
• Do not allow the jumpstarter to become very flat. If the ‘Low’ BATTERY STATUS
LED is illuminated on the front of the unit, ensure the jumpstarter is charged
immediately.
FEATURES
RAPID RECHARGE TECHNOLOGY (RRT)
The Lithium Iron Phosphate (LiFePO4 ) battery is able to rapidly recover charge from the
vehicles alternator. Leaving the clamps connected to the vehicle battery for 40 seconds will
recharge the jumpstarter to 100%* of the original charge status. Once the jumpstarter is fully
charged the RRT will shut off avoiding overcharging.
3
JUMPSTARTING PERFORMANCE
This jumpstarter is designed to start vehicles that require a clamp output of up to 550 Amps
to start their engine. Fully charged with 20 seconds of RRT the IS1500 can do 150 petrol or
26 diesel starts (without a battery) or 300 petrol and 144 diesel emergency jumpstarts (with
flat vehicle battery**). With 40 seconds of RRT the jumpstarter will not need to be recharged
during the working day. However it is recommended that the IS1500 be charged on the dock
when not in use to increase the battery life by 10–20%.
ENGINE BAY SAFE OPERATION
The IS500 jumpstarter is light and compact compared to conventional Lead Acid jumpstarters.
With best in class over-mould material which provides secure grip and impact protection
allowing users to operate the unit on the engine or starter battery.
HIGH PERFORMANCE BATTERY
High quality 4-cell 8Ah Lithium Iron Phosphate battery delivers instant starting power
to petrol and diesel vehicles. The battery offers longer life, better power density and is
inherently safer (compared to lead acid batteries and other Lithium Batteries e.g. Lithium
Cobalt). It is certified to meet International Standard UN DOT 38.3.
ULTRA LOW BATTERY LEAKAGE CURRENT
A special circuit is added to prevent internal battery from leaking current. The user doesn’t need to
worry about battery depletion over time. Simply put it has longer shelf life between recharging.
DOCKING STATION FOR 240V
A slim and stable docking station is provided to allow the unit to be charged from a 240 Volt
AC outlet.
AUTOMATIC CELL BALANCED CHARGE CONTROL
Automatically stops charging when the battery is fully charged and initiates maintenance mode,
keeping the battery fully charged ready for use. You can leave the unit on change indefinitely
without the risk of overcharging. Using the docking station increases the life by 10–20%.
REVERSE POLARITY PROTECTION & ALARM
Prevents sparking from accidental reverse connection. Alarm sounds when jumpstarter clamps
are connected incorrectly. If the alarm sounds check for reverse connection.
OVER-TEMPERATURE PROTECTION
Should the unit overheat by continuous or numerous jumpstarts, the unit will shut off
automatically and restart once the over-temperature condition subsides.
UNDER-VOLTAGE AND OVER-VOLTAGE PROTECTION
The jumpstarter will deactivate and sound an alarm if connected to a vehicle battery which
is higher than 14.6V, or if the internal battery is discharged to a level whereby the battery
might be damaged.
BATTERY AND JUMPSTART STATUS INDICATION
Monitor the jumpstarter’s charge level and display jumpstart status from the easy to
read LED indicators and BATTERY STATUS button.
SURGE PROTECTION
Allows safe jumpstarting of vehicles with EFI (electronic fuel injection) and computer
management systems.
*Under normal conditions with a fully functioning alternator.
**Tested on Ford Ranger 3.2L Diesel and Ford Territory 4.0L Petrol with a flat battery on good condition.


Product specificaties

Merk: Projecta
Categorie: Niet gecategoriseerd
Model: IS1500

Heb je hulp nodig?

Als je hulp nodig hebt met Projecta IS1500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Projecta

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd